Temporarily unavailable
Have questions about this item?
$0.00
Have questions about this item?
You can pay for your order using any of these types of cards: Visa, MasterCard; as well as through these payment systems: PayPal and Bank transfer. All orders need to be prepaid to start processing. The parts are not reserved until the payment is received.
We provide worldwide shipping, but some parts cannot be processed in an automatic way. In all those cases the manager will contact you and will offer special delivery.
Deflection/Guide Pulley, V-ribbed belt
Art-Nr: A64-0137
Supplier:
ACKOJAP
Product info
Width [mm]:
21,5 mm
Outer diameter [mm]:
75 mm
Material:
Polyamid 6.6
Polyamid 6
Additional Info:
In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
EAN:
4062375242450
Category:
V-Ribbed Belt Guide Pulley
Condition:
new
Item Number:
A640137
Brand
Code
A.B.A
YM827521
ACKOJAP
A64-0137
ASVA
SZBP-008
AUTOKIT
03.81297
BLUE PRINT
ADK896505
BTA
E28012BTA
CAFFARO
500433
DYNAMATRIX
DT66028
FEBEST
0787-SPL
FEBI BILSTEIN
107286
GATES
T36747
HERTH+BUSS JAKOPARTS
J1148023
KAVO PARTS
DIP-8502
LYNXauto
PB-5054
MAXGEAR
54-1256
MGA
GA4287
NPS
S110I14
OPTIMAL
0-N2504
SKF
VKM 66028
SUZUKI
17530-82J00
SWAG
33 10 2411
Saleri SIL
T4997
TRISCAN
8641 692005
WILMINK GROUP
WG1783030
| Brand | Model | Engine code | Fuel | Displacement | HP | KW | Year |
| OPEL | AGILA (B) (H08) | K10B | Petrol/Liquified Petroleum Gas (LPG) | 1.0 | 65hp | 48kw | 2010-2011 |
| OPEL | AGILA (B) (H08) | K10B | Petrol | 1.0 | 65hp | 48kw | 2008-2011 |
| OPEL | AGILA (B) (H08) | K10B | Petrol | 1.0 | 68hp | 50kw | 2011-2014 |
| OPEL | AGILA (B) (H08) | K12B | Petrol/Liquified Petroleum Gas (LPG) | 1.2 | 86hp | 63kw | 2008-2010 |
| OPEL | AGILA (B) (H08) | K12B | Petrol | 1.2 | 86hp | 63kw | 2008-2012 |
| OPEL | AGILA (B) (H08) | K12B | Petrol | 1.2 | 94hp | 69kw | 2010-2014 |
| SUZUKI | SPLASH (EX) | K10B | Petrol | 1.0 | 65hp | 48kw | 2008-now |
| Important notes:Units / Pulleys: Driven unit: air conditioning compressor | |||||||
| SUZUKI | SPLASH (EX) | K10B | Petrol | 1.0 | 68hp | 50kw | 2011-now |
| Important notes:Units / Pulleys: Driven unit: air conditioning compressor | |||||||
| SUZUKI | SPLASH (EX) | K12B | Petrol | 1.2 | 86hp | 63kw | 2008-now |
| Important notes:Units / Pulleys: Driven unit: air conditioning compressor | |||||||
| SUZUKI | SPLASH (EX) | K12B | Petrol | 1.2 | 90hp | 66kw | 2011-now |
| Important notes:Units / Pulleys: Driven unit: air conditioning compressor | |||||||
| SUZUKI | SPLASH (EX) | K12B | Petrol | 1.2 | 94hp | 69kw | 2010-now |
| Important notes:Units / Pulleys: Driven unit: air conditioning compressor | |||||||
| SUZUKI | SWIFT IV (FZ, NZ) | K12B | Petrol | 1.2 | 90hp | 66kw | 2010-now |
| Important notes:Units / Pulleys: Driven unit: air conditioning compressor | |||||||
| SUZUKI | SWIFT IV (FZ, NZ) | K12B | Petrol | 1.2 | 94hp | 69kw | 2010-now |
| Important notes:Units / Pulleys: Driven unit: air conditioning compressor | |||||||
| VAUXHALL | AGILA Mk II (B) (H08) | K10B | Petrol | 1.0 | 65hp | 48kw | 2008-2014 |
| VAUXHALL | AGILA Mk II (B) (H08) | K12B | Petrol | 1.2 | 86hp | 63kw | 2008-2014 |
SIMILAR PRODUCTS FOR YOUR VEHICLE
Deflection/Guide Pulley, V-ribbed belt
Art-Nr: ADK896505
Weight [kg]: 0.311 kg
Material: Metal
Mounting points diameter [mm]: 10 mm
Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Outer diameter [mm]: 75 mm
Width [mm]: 21 mm
$21.64
no VAT req.
Available: 4
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Deflection/Guide Pulley, V-ribbed belt
Art-Nr: 107286
Weight [kg]: 0.311 kg
Material: Metal
Mounting points diameter [mm]: 10 mm
Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Outer diameter [mm]: 75 mm
Width [mm]: 21 mm
$24.49
no VAT req.
Available: 4
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Deflection/Guide Pulley, v-ribbed belt
Art-Nr: VKM66028
Width [mm]: 15 mm
Diameter [mm]: 70 mm
$30.32
no VAT req.
Available: 4
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
Deflection/Guide Pulley, V-ribbed belt
Art-Nr: 0-N2504
$17.73
no VAT req.
Available: 10+
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Deflection/Guide Pulley, v-ribbed belt
Art-Nr: 8641692005
Width [mm]: 22 mm
Outer diameter [mm]: 70 mm
Number of grooves: 4
Material: Metal
Inner diameter [mm]: 10 mm
$64.03
no VAT req.
Available: 2
Special Order
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
?
Handling time: About 30 business day(s)
Handling Time: About 30 business day(s)
The item should be shipped within 15 business day(s) of receiving cleared payment.
?
The item should be shipped within 30 business day(s) of receiving cleared payment.
Add to wishlist
Deflection/Guide Pulley, V-ribbed belt
Art-Nr: 541256
Width [mm]: 15,6 mm
Outer diameter [mm]: 70 mm
Material: Metal
Inner diameter [mm]: 10 mm
$15.40
no VAT req.
Available: 5
Available: 5
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
Handling time: About 5 business day(s)
Handling Time: About 5 business day(s)
The item should be shipped within 2 business day(s) of receiving cleared payment.
?
The item should be shipped within 5 business day(s) of receiving cleared payment.
Add to wishlist
Deflection/Guide Pulley, V-belt
Art-Nr: RNK-SU-006
Width [mm]: 15,6 mm
Outer diameter [mm]: 70 mm
Material: Metal
Inner diameter [mm]: 10 mm
$16.24
no VAT req.
Available: 3
Handling time: About 10 business day(s)
Handling Time: About 10 business day(s)
?
The item should be shipped within 10 business day(s) of receiving cleared payment.
Add to wishlist
ACKOJAP V-Ribbed Belt Guide Pulley
Deflection/Guide Pulley, V-ribbed belt
Art-Nr: A32-0246
Outer diameter [mm]: 71 mm
Inner diameter [mm]: 17 mm
Material: Polyamid 6.6
Weight [kg]: 0.768 kg
Width [mm]: 34.5 mm
Material: Polyamid 6
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$22.16
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Deflection/Guide Pulley, V-ribbed belt
Art-Nr: A32-0247
Material: Polyamid 6
Width [mm]: 22.5 mm
Inner diameter [mm]: 17 mm
Outer diameter [mm]: 75 mm
Weight [kg]: 0.422 kg
Weight [kg]: 0,4467 kg
Material: Polyamid 6.6
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$20.55
no VAT req.
Available: 4
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Deflection/Guide Pulley, V-ribbed belt
Art-Nr: A38-0336
Material: Polyamid 6.6
Width [mm]: 12.5 mm
Weight [kg]: 0.09 kg
Outer diameter [mm]: 69 mm
Inner diameter [mm]: 12 mm
Weight [kg]: 0,1147 kg
Material: Polyamid 6
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$21.68
no VAT req.
Available: 5
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Deflection/Guide Pulley, V-ribbed belt
Art-Nr: A52-0080
Material: Polyamid 6.6
Width [mm]: 70 mm
Weight [kg]: 0.23 kg
Material: Polyamid 6
Inner diameter [mm]: 17 mm
Width [mm]: 27,5 mm
Outer diameter [mm]: 70 mm
External Thread [mm]: M10x1,5 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$15.38
no VAT req.
Available: 3
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Deflection/Guide Pulley, V-ribbed belt
Art-Nr: A52-0321
Weight [kg]: 0.06 kg
Width [mm]: 23 mm
Inner diameter [mm]: 19 mm
Outer diameter [mm]: 60 mm
Weight [kg]: 0,135 kg
Material: Polyamid 6.6
Material: Polyamid 6
Inner diameter [mm]: 8 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$12.64
no VAT req.
Available: 7
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Deflection/Guide Pulley, V-ribbed belt
Art-Nr: A52-0322
Weight [kg]: 0.1268 kg
Width [mm]: 22 mm
Outer diameter [mm]: 66 mm
Material: Plastic
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$10.83
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Deflection/Guide Pulley, V-ribbed belt
Art-Nr: A70-0479
Outer diameter [mm]: 88.1 mm
Width [mm]: 24.7 mm
Weight [kg]: 0.57 kg
Inner diameter [mm]: 10 mm
Material: Polyamid 6
Material: Polyamid 6.6
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$59.09
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Deflection/Guide Pulley, V-ribbed belt
Art-Nr: A26-0249
Weight [kg]: 0.121 kg
Width [mm]: 26 mm
Outer diameter [mm]: 75 mm
Inner diameter [mm]: 17 mm
Material: Polyamid 6.6
Material: Polyamid 6
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$8.71
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
