$8.69
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
$8.69
Have questions about this item?
You can pay for your order using any of these types of cards: Visa, MasterCard; as well as through these payment systems: PayPal and Bank transfer. All orders need to be prepaid to start processing. The parts are not reserved until the payment is received.
We provide worldwide shipping, but some parts cannot be processed in an automatic way. In all those cases the manager will contact you and will offer special delivery.

Link/Coupling Rod, stabiliser bar

Art-Nr: A64-0519

ACKOJAP
Supplier: ACKOJAP
Link/Coupling Rod, stabiliser bar ACKOJAP A64-0519
Link/Coupling Rod, stabiliser bar ACKOJAP A64-0519 main

Product info

Weight [kg]:
0,325 kg
Rod/Strut:
Coupling Rod
Fitting Position:
Front Axle
Additional Info:
In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
EAN:
4062375229062
Category:
Stabilizer-/Accessories
 
Stabiliser And Parts
Condition:
new
Item Number:
A640519
Brand
Code
A.B.S.
260539
ACKOJAP
A64-0519
ASHUKI by Palidium
K875-29
AUTLOG
FT2313
AYD
9607006
BGA
LS2206
BIRTH
BX5055
BLUE PRINT
ADK88510
BORG & BECK
BDL7064
CAUTEX
750142
COMLINE
CSL7322
CORTECO
49401106
DELPHI
TC2420
DENCKERMANN
D140377
DITAS
A2-5956
FAG
818 0356 10
FAI AutoParts
SS7981
FARE SA
15409
FAST
FT20564
FEBI BILSTEIN
28638
FIAT
60 614 514
FIRST LINE
FDL7064
FLENNOR
FL0119-H
FORMPART
1408014
FRAP
F2377
GSP
S050038
JP GROUP
4740400500
KAWE
8500 10627
KRAFT AUTOMOTIVE
4307039
LEMFÖRDER
33913 02
LEMFÖRDER
31994 01
LYNXauto
C7289LR
MAPCO
59024HPS
MASTER-SPORT GERMANY
31994-PCS-MS
MAXGEAR
72-2951
METZGER
53020018
MEYLE
216 060 0015/HD
MGA
SA5341
MONROE
L10627
MOOG
FI-LS-5159
MOOG
AL-LS-0043
MOTAQUIP
VSL787
Metalcaucho
06939
NK
5111510PRO
NK
5115204
OCAP
0501376
OPEN PARTS
SSL1182.11
OPTIMAL
G7-1220
ORIGINAL IMPERIUM
27549
Omnicraft
2394657
QUARO
QS4898/HQ
QUICK STEER
LS7662
QUINTON HAZELL
QLS3650S
RTS
97-08513
SIDEM
77063
SKF
VKDS 342015
STARLINE
18.72.735
STC
T406939
STELLOX
56-07006A-SX
SUZUKI
71 742 688
SWAG
84 92 8638
TALOSA
50-07282
TEDGUM
00219279
TRISCAN
8500 10627
TRW
JTS1178
VEMA
25504
WILMINK GROUP
WG2040749
YAMATO
J68015YMT
ÜRO Parts
8A0407465
Brand Model Engine code Fuel Displacement HP KW Year
FIATSEDICI (189_)D19AADiesel1.9120hp88kw2006-2011
FIATSEDICI (189_)D20AADiesel2.0135hp99kw2006-2014
FIATSEDICI (189_)M16APetrol1.6107hp79kw2006-2014
FIATSEDICI (189_)M16APetrol1.6120hp88kw2006-2014
SUZUKICELERIO (LF)K10BPetrol1.068hp50kw2014-now
SUZUKICELERIO (LF)K10CPetrol1.068hp50kw2014-now
SUZUKIKIZASHI (FR)J24BPetrol2.4178hp131kw2010-now
SUZUKISWIFT IV (FZ, NZ)D13ADiesel1.375hp55kw2010-now
SUZUKISWIFT IV (FZ, NZ)D13AADiesel1.375hp55kw2010-now
SUZUKISWIFT IV (FZ, NZ)K12BPetrol1.290hp66kw2010-now
SUZUKISWIFT IV (FZ, NZ)K12BPetrol1.291hp67kw2012-now
SUZUKISWIFT IV (FZ, NZ)K12BPetrol1.294hp69kw2010-now
SUZUKISWIFT IV (FZ, NZ)K12MPetrol1.286hp63kw2013-now
SUZUKISWIFT IV (FZ, NZ)K12MPetrol1.287hp64kw2013-now
SUZUKISWIFT IV (FZ, NZ)K14BPetrol1.495hp70kw2011-now
SUZUKISWIFT IV (FZ, NZ)M16APetrol1.6136hp100kw2012-now
SUZUKISX4 (EY, GY)9HXDiesel1.690hp66kw2007-now
SUZUKISX4 (EY, GY)D19AADiesel1.9120hp88kw2006-now
SUZUKISX4 (EY, GY)D20AADiesel2.0135hp99kw2009-now
SUZUKISX4 (EY, GY)J20APetrol2.0146hp107kw2006-now
SUZUKISX4 (EY, GY)J20BPetrol2.0152hp112kw2010-now
SUZUKISX4 (EY, GY)M15APetrol1.5110hp81kw2007-2015
SUZUKISX4 (EY, GY)M15APetrol1.5112hp82kw2010-now
SUZUKISX4 (EY, GY)M15APetrol1.599hp73kw2006-2010
SUZUKISX4 (EY, GY)M16APetrol/Liquified Petroleum Gas (LPG)1.6107hp79kw2006-2012
SUZUKISX4 (EY, GY)M16APetrol1.6107hp79kw2006-now
SUZUKISX4 (EY, GY)M16APetrol1.6112hp82kw2009-now
SUZUKISX4 (EY, GY)M16APetrol1.6112hp82kw2010-2015
SUZUKISX4 (EY, GY)M16APetrol1.6120hp88kw2009-now
SUZUKISX4 S-CROSS (JY)D16AADiesel1.6120hp88kw2013-now
SUZUKISX4 S-CROSS (JY)K10CPetrol1.0112hp82kw2016-now
SUZUKISX4 S-CROSS (JY)K14CPetrol1.4140hp103kw2016-now
SUZUKISX4 S-CROSS (JY)M16APetrol1.6116hp85kw2013-now
SUZUKISX4 S-CROSS (JY)M16APetrol1.6117hp86kw2013-now
SUZUKISX4 S-CROSS (JY)M16APetrol1.6118hp87kw2014-now
SUZUKISX4 S-CROSS (JY)M16APetrol1.6120hp88kw2013-now
SUZUKISX4 Saloon (GY)J20APetrol2.0146hp107kw2007-2010
SUZUKISX4 Saloon (GY)M16APetrol1.6107hp79kw2007-2011
SUZUKISX4 Saloon (GY)M16APetrol1.6107hp79kw2007-now
SUZUKISX4 Saloon (GY)M16APetrol1.6110hp81kw2013-2015
SUZUKISX4 Saloon (GY)M16APetrol1.6120hp88kw2007-now
SUZUKISX4 Saloon (GY, RW)J20APetrol2.0146hp107kw2007-2010
SUZUKISX4 Saloon (GY, RW)M16APetrol1.6107hp79kw2007-2011
SUZUKISX4 Saloon (GY, RW)M16APetrol1.6107hp79kw2007-now
SUZUKISX4 Saloon (GY, RW)M16APetrol1.6110hp81kw2013-2015
SUZUKISX4 Saloon (GY, RW)M16APetrol1.6120hp88kw2007-now
SUZUKIVITARA (LY)D16AADiesel1.6120hp88kw2015-now
SUZUKIVITARA (LY)K10CPetrol1.0111hp82kw2018-now
SUZUKIVITARA (LY)K14CPetrol1.4140hp103kw2015-now
SUZUKIVITARA (LY)M16APetrol1.6116hp85kw2015-now
SUZUKIVITARA (LY)M16APetrol1.6117hp86kw2015-now
SUZUKIVITARA (LY)M16APetrol1.6120hp88kw2015-now
SUZUKIVITARA (LY)M16APetrol1.6126hp93kw2016-now

SIMILAR PRODUCTS FOR YOUR VEHICLE

Link/Coupling Rod, stabiliser bar SWAG 84928638 SWAG Link/Coupling Rod, stabiliser bar SWAG Art-Nr: 84928638 Rod/Strut: Coupling Rod Length [mm]: 270 mm Weight [kg]: 0.35 kg Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Supplementary Article/Info 2: with nut Pipe Ø [mm]: 8 mm Fitting Position: Front Axle Right Fitting Position: Front Axle Left Material: Steel Spanner Size: 17 External Thread Size: M10 x 1,25
$12.64
no VAT req.
Available: 6 Available: 6 Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Link/Coupling Rod, stabiliser bar SWAG 74943450 SWAG Link/Coupling Rod, stabiliser bar SWAG Art-Nr: 74943450 Rod/Strut: Coupling Rod Weight [kg]: 0.35 kg Material: Steel Length [mm]: 270 mm Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Supplementary Article/Info 2: with nut Fitting Position: Front Axle Right Fitting Position: Front Axle Left External Thread Size: M10 x 1,25
$12.66
no VAT req.
Available: 4 Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Link/Coupling Rod, stabiliser bar FEBI BILSTEIN 43450 FEBI BILSTEIN Link/Coupling Rod, stabiliser bar FEBI BILSTEIN Art-Nr: 43450 Rod/Strut: Coupling Rod Weight [kg]: 0.35 kg Material: Steel Length [mm]: 270 mm Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Supplementary Article/Info 2: with nut for OE number: 60614514 Fitting Position: Front Axle Right Fitting Position: Front Axle Left External Thread Size: M10 x 1,25
$13.45
no VAT req.
Available: 4 Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Link/Coupling Rod, stabiliser bar DELPHI TC2195 DELPHI Link/Coupling Rod, stabiliser bar DELPHI Art-Nr: TC2195 Rod/Strut: Coupling Rod Thread Size: M10x1.5 Height [mm]: 62 mm Width [mm]: 34 mm Length [mm]: 270 mm Thread Size 1: M10x1.5
$10.51
no VAT req.
Available: 5 Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Link/Coupling Rod, stabiliser bar DELPHI TC2420 DELPHI Link/Coupling Rod, stabiliser bar DELPHI Art-Nr: TC2420 Rod/Strut: Coupling Rod Thread Size: M10x1.25 Height [mm]: 50 mm Width [mm]: 32 mm Length [mm]: 270 mm Thread Size 1: M10x1.25
$12.91
no VAT req.
Available: 5 Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Link/Coupling Rod, stabiliser bar BLUE PRINT ADK88510 BLUE PRINT Link/Coupling Rod, stabiliser bar BLUE PRINT Art-Nr: ADK88510 Weight [kg]: 0.324 kg Rod/Strut: Coupling Rod Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Supplementary Article/Info 2: with nut for OE number: 42420-80J00-000 Fitting Position: Front Axle Right Fitting Position: Front Axle Left Material: Steel Spanner Size: 17 External Thread Size: M10 x 1,25 Length [mm]: 270 mm
$10.85
no VAT req.
Available: 4 Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Rod/Strut, stabiliser TRISCAN 850010627 TRISCAN Rod/Strut, stabiliser TRISCAN Art-Nr: 850010627 Rod/Strut: Coupling Rod Required quantity: 2
$10.92
no VAT req.
Available: 10+ Special Order Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Handling time: About 30 business day(s) Handling Time: About 30 business day(s)
?
The item should be shipped within 30 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
no image skf Rod/Strut, stabiliser skf Art-Nr: VKDS342015 Rod/Strut: Coupling Rod
$10.84
no VAT req.
Available: 5 Handling time: About 2 business day(s) Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Rod/Strut, stabiliser DENCKERMANN D140139 DENCKERMANN Rod/Strut, stabiliser DENCKERMANN Art-Nr: D140139 Rod/Strut: Coupling Rod Fitting Position: Left and right Fitting Position: Front Axle
$6.41
no VAT req.
Available: 4 Handling time: About 2 business day(s) Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Rod/Strut, stabiliser TEDGUM 00219279 TEDGUM Rod/Strut, stabiliser TEDGUM Art-Nr: 00219279 Rod/Strut: for coupling rod Quantity: 2 Fitting Position: Right Fitting Position: Left Fitting Position: Front Axle
$5.96
no VAT req.
Available: 2 Handling time: About 2 business day(s) Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro

ACKOJAP Stabiliser and parts

Mounting, stabiliser bar ACKOJAP A37-0139 ACKOJAP Mounting, stabiliser bar ACKOJAP Art-Nr: A37-0139 Required quantity: 2 Mounting Type: Rubber Bush Inner diameter [mm]: 23 mm Fitting Position: Front Axle both sides Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$3.48
no VAT req.
Available: 10 Available: 10 Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Link/Coupling Rod, stabiliser bar ACKOJAP A37-1150 ACKOJAP Link/Coupling Rod, stabiliser bar ACKOJAP Art-Nr: A37-1150 Rod/Strut: Coupling Rod Fitting Position: Front Axle Weight [kg]: 0.286 kg Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$9.78
no VAT req.
Available: 10+ Available: 10+ Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Mounting, stabiliser bar ACKOJAP A38-0238 ACKOJAP Mounting, stabiliser bar ACKOJAP Art-Nr: A38-0238 Inner diameter [mm]: 26 mm Required quantity: 2 Length [mm]: 50.8 mm Mounting Type: Rubber Bush Fitting Position: Front Axle both sides Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$4.72
no VAT req.
Available: 2 Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Mounting, stabiliser bar ACKOJAP A63-0023 ACKOJAP Mounting, stabiliser bar ACKOJAP Art-Nr: A63-0023 Inner diameter [mm]: 20 mm Required quantity: 2 Mounting Type: Rubber Bush Fitting Position: Front Axle both sides Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$4.23
no VAT req.
Available: 10+ Available: 10+ Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Mounting, stabiliser bar ACKOJAP A63-0024 ACKOJAP Mounting, stabiliser bar ACKOJAP Art-Nr: A63-0024 Required quantity: 2 Inner diameter [mm]: 15 mm Mounting Type: Rubber Bush Fitting Position: Rear Axle both sides Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$4.50
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Link/Coupling Rod, stabiliser bar ACKOJAP A63-0063 ACKOJAP Link/Coupling Rod, stabiliser bar ACKOJAP Art-Nr: A63-0063 Weight [kg]: 0.596 kg Length [mm]: 342 mm Rod/Strut: Suspension Rod Fitting Position: Rear Axle Right paired article number: A63-0064 Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$15.15
no VAT req.
Available: 10+ Available: 10+ Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Link/Coupling Rod, stabiliser bar ACKOJAP A70-0001 ACKOJAP Link/Coupling Rod, stabiliser bar ACKOJAP Art-Nr: A70-0001 Rod/Strut: Suspension Rod Fitting Position: Front Axle Right paired article number: A70-0002 Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$18.49
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Link/Coupling Rod, stabiliser bar ACKOJAP A70-0002 ACKOJAP Link/Coupling Rod, stabiliser bar ACKOJAP Art-Nr: A70-0002 Rod/Strut: Coupling Rod Fitting Position: Front Axle Left paired article number: A70-0001 Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$6.93
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Link/Coupling Rod, stabiliser bar ACKOJAP A70-0019 ACKOJAP Link/Coupling Rod, stabiliser bar ACKOJAP Art-Nr: A70-0019 Rod/Strut: Coupling Rod Outer diameter [mm]: 8.5 mm Spanner Size: 13 [mm] Spanner Size: 10 [mm] Length [mm]: 97.5 mm Thread Length [mm]: 13 mm Fitting Position: Front Axle External Thread [mm]: M 8 x 1,25 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$4.40
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Link/Coupling Rod, stabiliser bar ACKOJAP A70-0515 ACKOJAP Link/Coupling Rod, stabiliser bar ACKOJAP Art-Nr: A70-0515 Thread Size 2: M10x1,25 Thread Size 1: M10x1,25 Weight [kg]: 0.615 kg Length [mm]: 260 mm Rod/Strut: Suspension Rod Fitting Position: Rear Axle Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$26.34
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro