$106.75
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
$106.75
Have questions about this item?
You can pay for your order using any of these types of cards: Visa, MasterCard; as well as through these payment systems: PayPal and Bank transfer. All orders need to be prepaid to start processing. The parts are not reserved until the payment is received.
We provide worldwide shipping, but some parts cannot be processed in an automatic way. In all those cases the manager will contact you and will offer special delivery.
Control Arm/Trailing Arm, wheel suspension
Art-Nr: A37-9607
Supplier:
ACKOJAP
Product info
paired article number:
A37-9608
Fitting Position:
Right
Control/Trailing Arm Type:
Control Arm
Additional Info:
In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
EAN:
4062375228058
Category:
Steering Links / Mounting
Steering Link
Control Arm/Swing Arm Joint
Condition:
new
Item Number:
A379607
Brand
Code
A.B.S.
211987
ACKOJAP
A37-9607
ASHIKA
72-05-524R
ASVA
0424-007
BLUE PRINT
ADC48672
BORG & BECK
BCA7502
DELPHI
TC3622
DODA
1060120137
FEBEST
0424-V97FR
FEBI BILSTEIN
41253
FIRST LINE
FCA7502
FORMPART
3909022
FRAP
F4454
GSP
S061064
JAPANPARTS
BS-524R
JAPKO
72524R
KAVO PARTS
SCA-5580
MAGNETI MARELLI
301181382300
MAPCO
52255
MDR
MSA-8525
MGA
SB7231
MITSUBISHI
MR496794
MITSUBISHI
4010A038
MITSUBISHI
4010A140
MITSUBISHI
4010A042
MONROE
L42537
NIPPARTS
J4935006
NPS
M421I103
PEMEBLA
JAPBS-524R
TALOSA
40-06271
VEMA
27214
| Brand | Model | Engine code | Fuel | Displacement | HP | KW | Year |
| MITSUBISHI | MONTERO III (V7_W, V6_W) | 4D56 T | Diesel | 2.5 | 115hp | 85kw | 2001-2006 |
| Important notes:Block Separation: ;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Montero;Vehicle type: Pajero | |||||||
| MITSUBISHI | MONTERO III (V7_W, V6_W) | 4D56 T | Diesel | 2.5 | 99hp | 73kw | 2000-2006 |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper | |||||||
| MITSUBISHI | MONTERO III (V7_W, V6_W) | 4D56-T | Diesel | 2.5 | 115hp | 85kw | 2001-2006 |
| Important notes:Block Separation: ;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Montero;Vehicle type: Pajero | |||||||
| MITSUBISHI | MONTERO III (V7_W, V6_W) | 4D56-T | Diesel | 2.5 | 99hp | 73kw | 2000-2006 |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper | |||||||
| MITSUBISHI | MONTERO III (V7_W, V6_W) | 4M41 | Diesel | 3.2 | 160hp | 118kw | 2000-2006 |
| Important notes:Block Separation: ;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Montero;Vehicle type: Pajero;Vehicle type: Shogun | |||||||
| MITSUBISHI | MONTERO III (V7_W, V6_W) | 4M41 | Diesel | 3.2 | 165hp | 121kw | 2000-2006 |
| Important notes:Block Separation: ;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Montero;Vehicle type: Pajero | |||||||
| MITSUBISHI | MONTERO III (V7_W, V6_W) | 6G74 (DOHC 24V) | Petrol | 3.5 | 203hp | 149kw | 2000-2007 |
| Important notes:Block Separation: ;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Montero;Vehicle type: Pajero;Vehicle type: Shogun | |||||||
| MITSUBISHI | MONTERO III (V7_W, V6_W) | 6G75 | Petrol | 3.8 | 218hp | 160kw | 2002-2006 |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Montero;Vehicle type: Pajero | |||||||
| MITSUBISHI | MONTERO III (V7_W, V6_W) | 6G75 | Petrol | 3.8 | 250hp | 184kw | 2003-2007 |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper | |||||||
| MITSUBISHI | MONTERO III Open Off-Road Vehicle (V6_W, V7_W) | 4D56 T | Diesel | 2.5 | 115hp | 85kw | 2001-2006 |
| Important notes:Block Separation: ;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Montero;Vehicle type: Pajero;Vehicle type: Shogun | |||||||
| MITSUBISHI | MONTERO III Open Off-Road Vehicle (V6_W, V7_W) | 4D56 T | Diesel | 2.5 | 99hp | 73kw | 2000-2006 |
| Important notes:Block Separation: ;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Pajero;Vehicle type: Shogun | |||||||
| MITSUBISHI | MONTERO III Open Off-Road Vehicle (V6_W, V7_W) | 4D56-T | Diesel | 2.5 | 115hp | 85kw | 2001-2006 |
| Important notes:Block Separation: ;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Montero;Vehicle type: Pajero;Vehicle type: Shogun | |||||||
| MITSUBISHI | MONTERO III Open Off-Road Vehicle (V6_W, V7_W) | 4D56-T | Diesel | 2.5 | 99hp | 73kw | 2000-2006 |
| Important notes:Block Separation: ;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Pajero;Vehicle type: Shogun | |||||||
| MITSUBISHI | MONTERO III Open Off-Road Vehicle (V6_W, V7_W) | 4M41 | Diesel | 3.2 | 160hp | 118kw | 2001-2006 |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Pajero;Vehicle type: Shogun | |||||||
| MITSUBISHI | MONTERO III Open Off-Road Vehicle (V6_W, V7_W) | 4M41 | Diesel | 3.2 | 165hp | 121kw | 2000-2006 |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Pajero;Vehicle type: Shogun | |||||||
| MITSUBISHI | MONTERO III Open Off-Road Vehicle (V6_W, V7_W) | 6G72 (SOHC 24V) | Petrol | 3.0 | 170hp | 125kw | 2001-2006 |
| Important notes:Block Separation: ;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Montero;Vehicle type: Pajero | |||||||
| MITSUBISHI | MONTERO III Open Off-Road Vehicle (V6_W, V7_W) | 6G74 (GDI) | Petrol | 3.5 | 203hp | 149kw | 2000-2006 |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Pajero | |||||||
| MITSUBISHI | MONTERO IV (V8_W, V9_W) | 4M41 | Diesel | 3.2 | 160hp | 118kw | 2007-now |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Pajero | |||||||
| MITSUBISHI | MONTERO IV (V8_W, V9_W) | 4M41 | Diesel | 3.2 | 165hp | 121kw | 2008-now |
| Important notes:Block Separation: ;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Montero;Vehicle type: Pajero | |||||||
| MITSUBISHI | MONTERO IV (V8_W, V9_W) | 4M41 | Diesel | 3.2 | 167hp | 123kw | 2007-now |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper | |||||||
| MITSUBISHI | MONTERO IV (V8_W, V9_W) | 4M41 | Diesel | 3.2 | 170hp | 125kw | 2007-now |
| Important notes:Block Separation: ;Body Type: Closed Off-Road Vehicle;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Number of Doors: 2;Number of Doors: 4;Vehicle type: Montero;Vehicle type: Pajero;Vehicle type: Shogun | |||||||
| MITSUBISHI | MONTERO IV (V8_W, V9_W) | 4M41 | Diesel | 3.2 | 190hp | 140kw | 2007-now |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Montero;Vehicle type: Shogun Van | |||||||
| MITSUBISHI | MONTERO IV (V8_W, V9_W) | 4M41 | Diesel | 3.2 | 192hp | 141kw | 2016-now |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper | |||||||
| MITSUBISHI | MONTERO IV (V8_W, V9_W) | 4M41 | Diesel | 3.2 | 200hp | 147kw | 2009-now |
| Important notes:Block Separation: ;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Montero;Vehicle type: Pajero | |||||||
| MITSUBISHI | MONTERO IV (V8_W, V9_W) | 6G72 (SOHC 24V) | Petrol | 3.0 | 174hp | 128kw | 2014-now |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper | |||||||
| MITSUBISHI | MONTERO IV (V8_W, V9_W) | 6G72 (SOHC 24V) | Petrol | 3.0 | 177hp | 130kw | 2009-now |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper | |||||||
| MITSUBISHI | MONTERO IV (V8_W, V9_W) | 6G72 (SOHC 24V) | Petrol | 3.0 | 178hp | 131kw | 2007-now |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper | |||||||
| MITSUBISHI | MONTERO IV (V8_W, V9_W) | 6G75 | Petrol | 3.8 | 238hp | 175kw | 2009-now |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper | |||||||
| MITSUBISHI | MONTERO IV (V8_W, V9_W) | 6G75 | Petrol | 3.8 | 239hp | 176kw | 2010-now |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper | |||||||
| MITSUBISHI | MONTERO IV (V8_W, V9_W) | 6G75 | Petrol | 3.8 | 245hp | 180kw | 2010-now |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper | |||||||
| MITSUBISHI | MONTERO IV (V8_W, V9_W) | 6G75 | Petrol | 3.8 | 248hp | 182kw | 2006-now |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper | |||||||
| MITSUBISHI | MONTERO IV (V8_W, V9_W) | 6G75 | Petrol | 3.8 | 250hp | 184kw | 2007-now |
| Important notes:Block Separation: ;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Montero;Vehicle type: Pajero;Vehicle type: Shogun | |||||||
| MITSUBISHI | PAJERO CLASSIC (V2_W, V6_W, V7_W) | 6G75 | Petrol | 3.8 | 218hp | 160kw | 2002-now |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Pajero | |||||||
| MITSUBISHI | PAJERO II (V3_W) | 4M41 | Diesel | 3.2 | 160hp | 118kw | 2005-2007 |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper | |||||||
| MITSUBISHI | PAJERO II (V3_W) | 4M41 | Diesel | 3.2 | 165hp | 121kw | 2000-2007 |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper | |||||||
| MITSUBISHI | PAJERO III (V7_W, V6_W) | 4D56 T | Diesel | 2.5 | 115hp | 85kw | 2001-2006 |
| Important notes:Block Separation: ;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Montero;Vehicle type: Pajero | |||||||
| MITSUBISHI | PAJERO III (V7_W, V6_W) | 4D56 T | Diesel | 2.5 | 99hp | 73kw | 2000-2006 |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper | |||||||
| MITSUBISHI | PAJERO III (V7_W, V6_W) | 4D56-T | Diesel | 2.5 | 115hp | 85kw | 2001-2006 |
| Important notes:Block Separation: ;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Montero;Vehicle type: Pajero | |||||||
| MITSUBISHI | PAJERO III (V7_W, V6_W) | 4D56-T | Diesel | 2.5 | 99hp | 73kw | 2000-2006 |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper | |||||||
| MITSUBISHI | PAJERO III (V7_W, V6_W) | 4M41 | Diesel | 3.2 | 160hp | 118kw | 2000-2006 |
| Important notes:Block Separation: ;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Montero;Vehicle type: Pajero;Vehicle type: Shogun | |||||||
| MITSUBISHI | PAJERO III (V7_W, V6_W) | 4M41 | Diesel | 3.2 | 165hp | 121kw | 2000-2006 |
| Important notes:Block Separation: ;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Montero;Vehicle type: Pajero | |||||||
| MITSUBISHI | PAJERO III (V7_W, V6_W) | 6G74 (DOHC 24V) | Petrol | 3.5 | 203hp | 149kw | 2000-2007 |
| Important notes:Block Separation: ;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Montero;Vehicle type: Pajero;Vehicle type: Shogun | |||||||
| MITSUBISHI | PAJERO III (V7_W, V6_W) | 6G75 | Petrol | 3.8 | 218hp | 160kw | 2002-2006 |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Montero;Vehicle type: Pajero | |||||||
| MITSUBISHI | PAJERO III (V7_W, V6_W) | 6G75 | Petrol | 3.8 | 250hp | 184kw | 2003-2007 |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper | |||||||
| MITSUBISHI | PAJERO III Canvas Top (V6_W, V7_W) | 4D56 T | Diesel | 2.5 | 115hp | 85kw | 2001-2006 |
| Important notes:Block Separation: ;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Montero;Vehicle type: Pajero;Vehicle type: Shogun | |||||||
| MITSUBISHI | PAJERO III Canvas Top (V6_W, V7_W) | 4D56 T | Diesel | 2.5 | 99hp | 73kw | 2000-2006 |
| Important notes:Block Separation: ;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Pajero;Vehicle type: Shogun | |||||||
| MITSUBISHI | PAJERO III Canvas Top (V6_W, V7_W) | 4D56-T | Diesel | 2.5 | 115hp | 85kw | 2001-2006 |
| Important notes:Block Separation: ;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Montero;Vehicle type: Pajero;Vehicle type: Shogun | |||||||
| MITSUBISHI | PAJERO III Canvas Top (V6_W, V7_W) | 4D56-T | Diesel | 2.5 | 99hp | 73kw | 2000-2006 |
| Important notes:Block Separation: ;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Pajero;Vehicle type: Shogun | |||||||
| MITSUBISHI | PAJERO III Canvas Top (V6_W, V7_W) | 4M41 | Diesel | 3.2 | 160hp | 118kw | 2001-2006 |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Pajero;Vehicle type: Shogun | |||||||
| MITSUBISHI | PAJERO III Canvas Top (V6_W, V7_W) | 4M41 | Diesel | 3.2 | 165hp | 121kw | 2000-2006 |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Pajero;Vehicle type: Shogun | |||||||
| MITSUBISHI | PAJERO III Canvas Top (V6_W, V7_W) | 6G72 (SOHC 24V) | Petrol | 3.0 | 170hp | 125kw | 2001-2006 |
| Important notes:Block Separation: ;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Montero;Vehicle type: Pajero | |||||||
| MITSUBISHI | PAJERO III Canvas Top (V6_W, V7_W) | 6G74 (GDI) | Petrol | 3.5 | 203hp | 149kw | 2000-2006 |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Pajero | |||||||
| MITSUBISHI | PAJERO III Open Off-Road Vehicle (V6_W, V7_W) | 4D56 T | Diesel | 2.5 | 115hp | 85kw | 2001-2006 |
| Important notes:Block Separation: ;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Montero;Vehicle type: Pajero;Vehicle type: Shogun | |||||||
| MITSUBISHI | PAJERO III Open Off-Road Vehicle (V6_W, V7_W) | 4D56 T | Diesel | 2.5 | 99hp | 73kw | 2000-2006 |
| Important notes:Block Separation: ;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Pajero;Vehicle type: Shogun | |||||||
| MITSUBISHI | PAJERO III Open Off-Road Vehicle (V6_W, V7_W) | 4D56-T | Diesel | 2.5 | 115hp | 85kw | 2001-2006 |
| Important notes:Block Separation: ;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Montero;Vehicle type: Pajero;Vehicle type: Shogun | |||||||
| MITSUBISHI | PAJERO III Open Off-Road Vehicle (V6_W, V7_W) | 4D56-T | Diesel | 2.5 | 99hp | 73kw | 2000-2006 |
| Important notes:Block Separation: ;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Pajero;Vehicle type: Shogun | |||||||
| MITSUBISHI | PAJERO III Open Off-Road Vehicle (V6_W, V7_W) | 4M41 | Diesel | 3.2 | 160hp | 118kw | 2001-2006 |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Pajero;Vehicle type: Shogun | |||||||
| MITSUBISHI | PAJERO III Open Off-Road Vehicle (V6_W, V7_W) | 4M41 | Diesel | 3.2 | 165hp | 121kw | 2000-2006 |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Pajero;Vehicle type: Shogun | |||||||
| MITSUBISHI | PAJERO III Open Off-Road Vehicle (V6_W, V7_W) | 6G72 (SOHC 24V) | Petrol | 3.0 | 170hp | 125kw | 2001-2006 |
| Important notes:Block Separation: ;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Montero;Vehicle type: Pajero | |||||||
| MITSUBISHI | PAJERO III Open Off-Road Vehicle (V6_W, V7_W) | 6G74 (GDI) | Petrol | 3.5 | 203hp | 149kw | 2000-2006 |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Pajero | |||||||
| MITSUBISHI | PAJERO IV (V8_W, V9_W) | 4M41 | Diesel | 3.2 | 160hp | 118kw | 2007-now |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Pajero | |||||||
| MITSUBISHI | PAJERO IV (V8_W, V9_W) | 4M41 | Diesel | 3.2 | 165hp | 121kw | 2008-now |
| Important notes:Block Separation: ;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Montero;Vehicle type: Pajero | |||||||
| MITSUBISHI | PAJERO IV (V8_W, V9_W) | 4M41 | Diesel | 3.2 | 167hp | 123kw | 2007-now |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper | |||||||
| MITSUBISHI | PAJERO IV (V8_W, V9_W) | 4M41 | Diesel | 3.2 | 170hp | 125kw | 2007-now |
| Important notes:Block Separation: ;Body Type: Closed Off-Road Vehicle;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Number of Doors: 2;Number of Doors: 4;Vehicle type: Montero;Vehicle type: Pajero;Vehicle type: Shogun | |||||||
| MITSUBISHI | PAJERO IV (V8_W, V9_W) | 4M41 | Diesel | 3.2 | 190hp | 140kw | 2007-now |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Montero;Vehicle type: Shogun Van | |||||||
| MITSUBISHI | PAJERO IV (V8_W, V9_W) | 4M41 | Diesel | 3.2 | 192hp | 141kw | 2016-now |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper | |||||||
| MITSUBISHI | PAJERO IV (V8_W, V9_W) | 4M41 | Diesel | 3.2 | 200hp | 147kw | 2009-now |
| Important notes:Block Separation: ;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Montero;Vehicle type: Pajero | |||||||
| MITSUBISHI | PAJERO IV (V8_W, V9_W) | 6G72 (SOHC 24V) | Petrol | 3.0 | 174hp | 128kw | 2014-now |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper | |||||||
| MITSUBISHI | PAJERO IV (V8_W, V9_W) | 6G72 (SOHC 24V) | Petrol | 3.0 | 177hp | 130kw | 2009-now |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper | |||||||
| MITSUBISHI | PAJERO IV (V8_W, V9_W) | 6G72 (SOHC 24V) | Petrol | 3.0 | 178hp | 131kw | 2007-now |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper | |||||||
| MITSUBISHI | PAJERO IV (V8_W, V9_W) | 6G75 | Petrol | 3.8 | 238hp | 175kw | 2009-now |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper | |||||||
| MITSUBISHI | PAJERO IV (V8_W, V9_W) | 6G75 | Petrol | 3.8 | 239hp | 176kw | 2010-now |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper | |||||||
| MITSUBISHI | PAJERO IV (V8_W, V9_W) | 6G75 | Petrol | 3.8 | 245hp | 180kw | 2010-now |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper | |||||||
| MITSUBISHI | PAJERO IV (V8_W, V9_W) | 6G75 | Petrol | 3.8 | 248hp | 182kw | 2006-now |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper | |||||||
| MITSUBISHI | PAJERO IV (V8_W, V9_W) | 6G75 | Petrol | 3.8 | 250hp | 184kw | 2007-now |
| Important notes:Block Separation: ;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Montero;Vehicle type: Pajero;Vehicle type: Shogun | |||||||
| MITSUBISHI | PAJERO IV Van (V9_, V8_, V8_V) | 4M41 | Diesel | 3.2 | 160hp | 118kw | 2006-now |
| Important notes:Block Separation: ;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Montero;Vehicle type: Pajero;Vehicle type: Shogun | |||||||
| MITSUBISHI | PAJERO IV Van (V9_, V8_, V8_V) | 4M41 | Diesel | 3.2 | 190hp | 140kw | 2007-now |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Pajero;Vehicle type: Shogun | |||||||
| MITSUBISHI | PAJERO IV Van (V9_, V8_, V8_V) | 4M41 | Diesel | 3.2 | 200hp | 147kw | 2010-now |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Pajero | |||||||
| MITSUBISHI | PAJERO PININ I (H6_W, H7_W) | 4M41 | Diesel | 3.2 | 160hp | 118kw | 1999-2006 |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper | |||||||
| MITSUBISHI | PAJERO SPORT III (KS_) | 6B31 | Petrol | 3.0 | 209hp | 154kw | 2015-now |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper | |||||||
| MITSUBISHI | PAJERO/SHOGUN III (V7_W, V6_W) | 4D56 T | Diesel | 2.5 | 115hp | 85kw | 2001-2006 |
| Important notes:Block Separation: ;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Montero;Vehicle type: Pajero | |||||||
| MITSUBISHI | PAJERO/SHOGUN III (V7_W, V6_W) | 4D56 T | Diesel | 2.5 | 99hp | 73kw | 2000-2006 |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper | |||||||
| MITSUBISHI | PAJERO/SHOGUN III (V7_W, V6_W) | 4D56-T | Diesel | 2.5 | 115hp | 85kw | 2001-2006 |
| Important notes:Block Separation: ;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Montero;Vehicle type: Pajero | |||||||
| MITSUBISHI | PAJERO/SHOGUN III (V7_W, V6_W) | 4D56-T | Diesel | 2.5 | 99hp | 73kw | 2000-2006 |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper | |||||||
| MITSUBISHI | PAJERO/SHOGUN III (V7_W, V6_W) | 4M41 | Diesel | 3.2 | 160hp | 118kw | 2000-2006 |
| Important notes:Block Separation: ;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Montero;Vehicle type: Pajero;Vehicle type: Shogun | |||||||
| MITSUBISHI | PAJERO/SHOGUN III (V7_W, V6_W) | 4M41 | Diesel | 3.2 | 165hp | 121kw | 2000-2006 |
| Important notes:Block Separation: ;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Montero;Vehicle type: Pajero | |||||||
| MITSUBISHI | PAJERO/SHOGUN III (V7_W, V6_W) | 6G74 (DOHC 24V) | Petrol | 3.5 | 203hp | 149kw | 2000-2007 |
| Important notes:Block Separation: ;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Montero;Vehicle type: Pajero;Vehicle type: Shogun | |||||||
| MITSUBISHI | PAJERO/SHOGUN III (V7_W, V6_W) | 6G75 | Petrol | 3.8 | 218hp | 160kw | 2002-2006 |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Montero;Vehicle type: Pajero | |||||||
| MITSUBISHI | PAJERO/SHOGUN III (V7_W, V6_W) | 6G75 | Petrol | 3.8 | 250hp | 184kw | 2003-2007 |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper | |||||||
| MITSUBISHI | PAJERO/SHOGUN III Open Off-Road Vehicle (V6_W, V7_W) | 4D56 T | Diesel | 2.5 | 115hp | 85kw | 2001-2006 |
| Important notes:Block Separation: ;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Montero;Vehicle type: Pajero;Vehicle type: Shogun | |||||||
| MITSUBISHI | PAJERO/SHOGUN III Open Off-Road Vehicle (V6_W, V7_W) | 4D56 T | Diesel | 2.5 | 99hp | 73kw | 2000-2006 |
| Important notes:Block Separation: ;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Pajero;Vehicle type: Shogun | |||||||
| MITSUBISHI | PAJERO/SHOGUN III Open Off-Road Vehicle (V6_W, V7_W) | 4D56-T | Diesel | 2.5 | 115hp | 85kw | 2001-2006 |
| Important notes:Block Separation: ;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Montero;Vehicle type: Pajero;Vehicle type: Shogun | |||||||
| MITSUBISHI | PAJERO/SHOGUN III Open Off-Road Vehicle (V6_W, V7_W) | 4D56-T | Diesel | 2.5 | 99hp | 73kw | 2000-2006 |
| Important notes:Block Separation: ;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Pajero;Vehicle type: Shogun | |||||||
| MITSUBISHI | PAJERO/SHOGUN III Open Off-Road Vehicle (V6_W, V7_W) | 4M41 | Diesel | 3.2 | 160hp | 118kw | 2001-2006 |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Pajero;Vehicle type: Shogun | |||||||
| MITSUBISHI | PAJERO/SHOGUN III Open Off-Road Vehicle (V6_W, V7_W) | 4M41 | Diesel | 3.2 | 165hp | 121kw | 2000-2006 |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Pajero;Vehicle type: Shogun | |||||||
| MITSUBISHI | PAJERO/SHOGUN III Open Off-Road Vehicle (V6_W, V7_W) | 6G72 (SOHC 24V) | Petrol | 3.0 | 170hp | 125kw | 2001-2006 |
| Important notes:Block Separation: ;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Montero;Vehicle type: Pajero | |||||||
| MITSUBISHI | PAJERO/SHOGUN III Open Off-Road Vehicle (V6_W, V7_W) | 6G74 (GDI) | Petrol | 3.5 | 203hp | 149kw | 2000-2006 |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Pajero | |||||||
| MITSUBISHI | PAJERO/SHOGUN Mk III Open Off-Road Vehicle (V6_W, V7_W) | 4D56 T | Diesel | 2.5 | 115hp | 85kw | 2001-2006 |
| Important notes:Block Separation: ;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Montero;Vehicle type: Pajero;Vehicle type: Shogun | |||||||
| MITSUBISHI | PAJERO/SHOGUN Mk III Open Off-Road Vehicle (V6_W, V7_W) | 4D56 T | Diesel | 2.5 | 99hp | 73kw | 2000-2006 |
| Important notes:Block Separation: ;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Pajero;Vehicle type: Shogun | |||||||
| MITSUBISHI | PAJERO/SHOGUN Mk III Open Off-Road Vehicle (V6_W, V7_W) | 4D56-T | Diesel | 2.5 | 115hp | 85kw | 2001-2006 |
| Important notes:Block Separation: ;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Montero;Vehicle type: Pajero;Vehicle type: Shogun | |||||||
| MITSUBISHI | PAJERO/SHOGUN Mk III Open Off-Road Vehicle (V6_W, V7_W) | 4D56-T | Diesel | 2.5 | 99hp | 73kw | 2000-2006 |
| Important notes:Block Separation: ;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Pajero;Vehicle type: Shogun | |||||||
| MITSUBISHI | PAJERO/SHOGUN Mk III Open Off-Road Vehicle (V6_W, V7_W) | 4M41 | Diesel | 3.2 | 160hp | 118kw | 2001-2006 |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Pajero;Vehicle type: Shogun | |||||||
| MITSUBISHI | PAJERO/SHOGUN Mk III Open Off-Road Vehicle (V6_W, V7_W) | 4M41 | Diesel | 3.2 | 165hp | 121kw | 2000-2006 |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Pajero;Vehicle type: Shogun | |||||||
| MITSUBISHI | PAJERO/SHOGUN Mk III Open Off-Road Vehicle (V6_W, V7_W) | 6G72 (SOHC 24V) | Petrol | 3.0 | 170hp | 125kw | 2001-2006 |
| Important notes:Block Separation: ;Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Montero;Vehicle type: Pajero | |||||||
| MITSUBISHI | PAJERO/SHOGUN Mk III Open Off-Road Vehicle (V6_W, V7_W) | 6G74 (GDI) | Petrol | 3.5 | 203hp | 149kw | 2000-2006 |
| Important notes:Fitting Position: Front Axle;Fitting Position: outer;Fitting Position: Upper;Vehicle type: Pajero | |||||||
SIMILAR PRODUCTS FOR YOUR VEHICLE
Control Arm/Trailing Arm, wheel suspension
Art-Nr: 41253
Material: Sheet Steel
Fitting Position: Front Axle Right
Fitting Position: Upper
Weight [kg]: 2.62 kg
Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Supplementary Article/Info 2: with bearing(s)
Supplementary Article/Info 2: with ball joint
Supplementary Article/Info 2: with crown nut
Control/Trailing Arm Type: Control Arm
Cone Size [mm]: 18 mm
External Thread Size: M14 x 1,5
paired article number: 41254
$66.71
no VAT req.
Available: 4
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Control Arm/Trailing Arm, wheel suspension
Art-Nr: TC3622
Height [mm]: 91 mm
Width [mm]: 286 mm
Length [mm]: 308 mm
Control/Trailing Arm Type: Control Arm
Thread Size 2: Bush Ø14,3 / 14,3 mm
Thread Size 1: M14 x 1,5 x 18,3
$41.57
no VAT req.
Available: 5
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Control Arm/Trailing Arm, wheel suspension
Art-Nr: ADC48672
Weight [kg]: 2.7 kg
Fitting Position: Upper
Fitting Position: Front Axle Right
Material: Sheet Steel
Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Supplementary Article/Info 2: with crown nut
Supplementary Article/Info 2: with ball joint
Supplementary Article/Info 2: with bearing(s)
Control/Trailing Arm Type: Control Arm
Cone Size [mm]: 18 mm
External Thread Size: M14 x 1,5
paired article number: ADC48673
$64.49
no VAT req.
Available: 4
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Control Arm/Trailing Arm, wheel suspension
Art-Nr: 301181382300
Fitting Position: Front Axle Right
Control/Trailing Arm Type: Control Arm
$37.54
no VAT req.
Available: 6
Special Order
Handling time: About 10 business day(s)
Handling Time: About 10 business day(s)
?
Handling time: About 30 business day(s)
Handling Time: About 30 business day(s)
The item should be shipped within 10 business day(s) of receiving cleared payment.
?
The item should be shipped within 30 business day(s) of receiving cleared payment.
Add to wishlist
Sleeve, control arm mounting
Art-Nr: 00442942
Steering arm type: for control arm
Quantity: 4
Fitting Position: Upper
Fitting Position: Rear
Fitting Position: Front Axle
Fitting Position: Front
$6.76
no VAT req.
Available: 8
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
Control Arm-/Trailing Arm Bush
Art-Nr: 00447945
Quantity per Axle: 4
Mounting Type: Rubber-metal Bearing
Steering arm type: for control arm
Fitting Position: Left and right
Material: PU (Polyurethane)
Fitting Position: Upper Front Axle
Fitting Position: Front
Fitting Position: Rear
$13.59
no VAT req.
Available: 4
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
Repair Kit, wheel suspension
Art-Nr: TED96857
Supplementary Article/Info 2: with mounting manual
Supplementary Article/Info 2: with grease cap
Required quantity: 1
Number of Parts [parts]: 22 -part
Material: PU (Polyurethane)
Fitting Position: Rear Axle
Fitting Position: Front Axle
$284.65
no VAT req.
Available: 1
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
Track Control Arm
Art-Nr: 72524R
Inner diameter [mm]: 14 mm
Outer thread [mm]: 14X1,5 mm
Fitting Position: Upper
Fitting Position: Right Front
Fitted Diameter [mm]: 16 mm
Overall Height [mm]: 81 mm
$33.61
no VAT req.
Available: 1
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
Control Arm-/Trailing Arm Bush
Art-Nr: MAB031
Weight [kg]: 0,27 kg
Packaging width [cm]: 5,5 cm
Packaging length [cm]: 5,5 cm
Packaging height [cm]: 5,5 cm
Fitting Position: Upper Front Axle
Fitting Position: inner
$4.97
no VAT req.
Available: 10+
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
Control Arm/Trailing Arm, wheel suspension
Art-Nr: ZWG-MS-037A
Fitting Position: outer
Supplementary Article/Info 2: without ball joint
Fitting Position: Upper
Fitting Position: Right
Fitting Position: Front Axle Right
Fitting Position: Front Axle
Control/Trailing Arm Type: Control Arm
$18.93
no VAT req.
Available: 5
Handling time: About 10 business day(s)
Handling Time: About 10 business day(s)
?
The item should be shipped within 10 business day(s) of receiving cleared payment.
Add to wishlist
ACKOJAP Control Arm/Swing Arm Joint
Control Arm/Trailing Arm, wheel suspension
Art-Nr: A32-1137
Fitting Position: Front Axle
Fitting Position: Left
Control/Trailing Arm Type: Control Arm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$56.84
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Control Arm/Trailing Arm, wheel suspension
Art-Nr: A32-1138
Fitting Position: Front Axle
Fitting Position: Right
Control/Trailing Arm Type: Control Arm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$56.84
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Control Arm/Trailing Arm, wheel suspension
Art-Nr: A32-1142
Fitting Position: Rear Axle
Control/Trailing Arm Type: Control Arm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$43.80
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Control Arm/Trailing Arm, wheel suspension
Art-Nr: A37-1141
Fitting Position: Lower Front Axle
Fitting Position: Right
Control/Trailing Arm Type: Control Arm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$32.50
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Mounting, control/trailing arm
Art-Nr: A38-0208
Required quantity: 2
Fitting Position: Front Axle
Fitting Position: Front
Mounting Type: Rubber-Metal Mount
Control/Trailing Arm Type: for control arm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$2.78
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Control Arm/Trailing Arm, wheel suspension
Art-Nr: A38-1160
Fitting Position: Lower
Cone Size [mm]: 16 mm
Fitting Position: Front Axle Right
Control/Trailing Arm Type: Control Arm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$44.57
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Control Arm/Trailing Arm, wheel suspension
Art-Nr: A52-0246
Fitting Position: Front Axle Right
paired article number: A52-0247
Control/Trailing Arm Type: Control Arm
Article number of the recommended special tool: V99-1020
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$116.64
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Control Arm/Trailing Arm, wheel suspension
Art-Nr: A64-1118
Fitting Position: Front Axle Left
Control/Trailing Arm Type: Control Arm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$41.41
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Control Arm/Trailing Arm, wheel suspension
Art-Nr: A64-1119
Fitting Position: Front Axle Right
Control/Trailing Arm Type: Control Arm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$45.11
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Mounting, control/trailing arm
Art-Nr: A70-0464
Fitting Position: Rear
Length [mm]: 89 mm
Inner diameter [mm]: 14.5 mm
Outer diameter [mm]: 56 mm
Mounting Type: Rubber-Metal Mount
Fitting Position: Front Axle
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$10.84
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
