$52.26
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
$52.26
Have questions about this item?
You can pay for your order using any of these types of cards: Visa, MasterCard; as well as through these payment systems: PayPal and Bank transfer. All orders need to be prepaid to start processing. The parts are not reserved until the payment is received.
We provide worldwide shipping, but some parts cannot be processed in an automatic way. In all those cases the manager will contact you and will offer special delivery.
Control Arm/Trailing Arm, wheel suspension
Art-Nr: A37-9605
Supplier:
ACKOJAP
Product info
Weight [kg]:
1,719 kg
Fitting Position:
Upper
Rear Axle
Control/Trailing Arm Type:
Control Arm
Additional Info:
In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
EAN:
4062375229086
Category:
Steering Links / Mounting
Steering Link
Control Arm/Swing Arm Joint
Condition:
new
Item Number:
A379605
Brand
Code
A.B.S.
211805
ACKOJAP
A37-9605
ASHIKA
71-05-519
BGA
TRC1442
BGA
TRC1429
BLUE PRINT
ADBP860050
BORG & BECK
BCA6774
CHRYSLER
05105271AA
CITROËN
5175 EH
CITROËN
1607498380
DELPHI
TC5966
DELPHI
TC3272
FEBEST
0425-CSUP
FEBI BILSTEIN
175413
FORMPART
3909017
HERTH+BUSS JAKOPARTS
J4945502
HERTH+BUSS JAKOPARTS
J4945508
HERTH+BUSS JAKOPARTS
J4945507
JAPANPARTS
CJ-519
JAPKO
71519
JEEP
K05105271AB
JEEP
K05105271AA
JEEP
K05105271AC
KAVO PARTS
SCA-5647
KAVO PARTS
SCA-5641
KAVO PARTS
SCA-5599
MAGNETI MARELLI
301181381900
MEYLE
32-16 050 0087
MEYLE
32-16 050 0022
MITSUBISHI
MN100086
MITSUBISHI
MR491911
MITSUBISHI
4110A085
MITSUBISHI
MN184100
MITSUBISHI
4110A012
MONROE
L42528
NIPPARTS
N4945013
NIPPARTS
N4945012
NK
5013021
PEUGEOT
16 074 983 80
PEUGEOT
5175.EH
SWAG
33 10 2891
TRISCAN
8500 42528
TRW
JTC7720
VEMA
26415
| Brand | Model | Engine code | Fuel | Displacement | HP | KW | Year |
| CITROËN | C4 AIRCROSS | 4A92 | Petrol | 1.6 | 117hp | 86kw | 2012-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| CITROËN | C4 AIRCROSS | 4N13 | Diesel | 1.8 | 150hp | 110kw | 2012-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| CITROËN | C4 AIRCROSS | 9HD (DV6C) | Diesel | 1.6 | 114hp | 84kw | 2012-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| CITROËN | C4 AIRCROSS | 9HL (DV6C) | Diesel | 1.6 | 114hp | 84kw | 2012-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| CITROËN | C4 AIRCROSS | NKZ (4A92) | Petrol | 1.6 | 117hp | 86kw | 2012-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | ASX (GA_W_) | 4A92 | Petrol/Liquified Petroleum Gas (LPG) | 1.6 | 117hp | 86kw | 2010-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | ASX (GA_W_) | 4A92 | Petrol | 1.6 | 116hp | 85kw | 2010-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | ASX (GA_W_) | 4A92 | Petrol | 1.6 | 117hp | 86kw | 2010-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | ASX (GA_W_) | 4B10 | Petrol | 1.8 | 139hp | 102kw | 2010-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right;Vehicle type: ASX | |||||||
| MITSUBISHI | ASX (GA_W_) | 4B11 | Petrol | 2.0 | 150hp | 110kw | 2010-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right;Vehicle type: ASX | |||||||
| MITSUBISHI | ASX (GA_W_) | 4J11 | Petrol | 2.0 | 150hp | 110kw | 2010-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right;Vehicle type: ASX | |||||||
| MITSUBISHI | ASX (GA_W_) | 4N13 | Diesel | 1.8 | 116hp | 85kw | 2010-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | ASX (GA_W_) | 4N13 | Diesel | 1.8 | 150hp | 110kw | 2010-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | ASX (GA_W_) | 4N14 | Diesel | 2.2 | 150hp | 110kw | 2013-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | ASX (GA_W_) | 9HD | Diesel | 1.6 | 114hp | 84kw | 2015-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | LANCER Saloon (CY/Z_A) | 4A91 | Petrol | 1.5 | 109hp | 80kw | 2008-now |
| Important notes:Construction year from: 201105;Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | LANCER Saloon (CY/Z_A) | 4A92 | Petrol | 1.6 | 117hp | 86kw | 2010-now |
| Important notes:Construction year from: 201105;Fitting Position: Left;Fitting Position: outer;Fitting Position: Right;Vehicle type: Lancer | |||||||
| MITSUBISHI | LANCER Saloon (CY/Z_A) | 4B10 | Petrol | 1.8 | 140hp | 103kw | 2010-now |
| Important notes:Construction year from: 201105;Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | LANCER Saloon (CY/Z_A) | 4B10 | Petrol | 1.8 | 143hp | 105kw | 2008-now |
| Important notes:Construction year from: 201105;Fitting Position: Left;Fitting Position: outer;Fitting Position: Right;Vehicle type: Lancer | |||||||
| MITSUBISHI | LANCER Saloon (CY/Z_A) | 4B10 | Petrol | 1.8 | 150hp | 110kw | 2009-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | LANCER Saloon (CY/Z_A) | 4B11 T/C | Petrol | 2.0 | 295hp | 217kw | 2008-2015 |
| Important notes:Construction year from: 201105;Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | LANCER Saloon (CY/Z_A) | 4B11 T/C | Petrol | 2.0 | 446hp | 328kw | 2014-2014 |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | LANCER Saloon (CY/Z_A) | 4B11-T/C | Petrol | 2.0 | 295hp | 217kw | 2008-2015 |
| Important notes:Construction year from: 201105;Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | LANCER Saloon (CY/Z_A) | 4B11-T/C | Petrol | 2.0 | 446hp | 328kw | 2014-2014 |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | LANCER Saloon (CY/Z_A) | 4B11 | Petrol | 2.0 | 150hp | 110kw | 2013-now |
| Important notes:Block Separation: ;Fitting Position: Left;Fitting Position: outer;Fitting Position: Right;Vehicle type: Lancer;Vehicle type: Lancer EX | |||||||
| MITSUBISHI | LANCER Saloon (CY/Z_A) | 4N13 | Diesel | 1.8 | 116hp | 85kw | 2010-now |
| Important notes:Construction year from: 201105;Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | LANCER Saloon (CY/Z_A) | 4N13 | Diesel | 1.8 | 150hp | 110kw | 2010-now |
| Important notes:Construction year from: 201105;Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | LANCER Saloon (CY/Z_A) | BKD | Diesel | 2.0 | 140hp | 103kw | 2008-now |
| Important notes:Construction year from: 201105;Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | LANCER Saloon (CY/Z_A) | BWC | Diesel | 2.0 | 140hp | 103kw | 2008-now |
| Important notes:Construction year from: 201105;Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | LANCER VIII (CY_A, CZ_A) | 4A91 | Petrol | 1.5 | 109hp | 80kw | 2008-now |
| Important notes:Construction year from: 201105;Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | LANCER VIII (CY_A, CZ_A) | 4A92 | Petrol | 1.6 | 117hp | 86kw | 2010-now |
| Important notes:Construction year from: 201105;Fitting Position: Left;Fitting Position: outer;Fitting Position: Right;Vehicle type: Lancer | |||||||
| MITSUBISHI | LANCER VIII (CY_A, CZ_A) | 4B10 | Petrol | 1.8 | 140hp | 103kw | 2010-now |
| Important notes:Construction year from: 201105;Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | LANCER VIII (CY_A, CZ_A) | 4B10 | Petrol | 1.8 | 143hp | 105kw | 2008-now |
| Important notes:Construction year from: 201105;Fitting Position: Left;Fitting Position: outer;Fitting Position: Right;Vehicle type: Lancer | |||||||
| MITSUBISHI | LANCER VIII (CY_A, CZ_A) | 4B10 | Petrol | 1.8 | 150hp | 110kw | 2009-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | LANCER VIII (CY_A, CZ_A) | 4B11 T/C | Petrol | 2.0 | 295hp | 217kw | 2008-2015 |
| Important notes:Construction year from: 201105;Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | LANCER VIII (CY_A, CZ_A) | 4B11 T/C | Petrol | 2.0 | 446hp | 328kw | 2014-2014 |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | LANCER VIII (CY_A, CZ_A) | 4B11-T/C | Petrol | 2.0 | 295hp | 217kw | 2008-2015 |
| Important notes:Construction year from: 201105;Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | LANCER VIII (CY_A, CZ_A) | 4B11-T/C | Petrol | 2.0 | 446hp | 328kw | 2014-2014 |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | LANCER VIII (CY_A, CZ_A) | 4B11 | Petrol | 2.0 | 150hp | 110kw | 2013-now |
| Important notes:Block Separation: ;Fitting Position: Left;Fitting Position: outer;Fitting Position: Right;Vehicle type: Lancer;Vehicle type: Lancer EX | |||||||
| MITSUBISHI | LANCER VIII (CY_A, CZ_A) | 4N13 | Diesel | 1.8 | 116hp | 85kw | 2010-now |
| Important notes:Construction year from: 201105;Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | LANCER VIII (CY_A, CZ_A) | 4N13 | Diesel | 1.8 | 150hp | 110kw | 2010-now |
| Important notes:Construction year from: 201105;Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | LANCER VIII (CY_A, CZ_A) | BKD | Diesel | 2.0 | 140hp | 103kw | 2008-now |
| Important notes:Construction year from: 201105;Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | LANCER VIII (CY_A, CZ_A) | BWC | Diesel | 2.0 | 140hp | 103kw | 2008-now |
| Important notes:Construction year from: 201105;Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | LANCER VIII Sportback (CX_A) | 4A91 | Petrol/Liquified Petroleum Gas (LPG) | 1.5 | 109hp | 80kw | 2010-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | LANCER VIII Sportback (CX_A) | 4A92 | Petrol | 1.6 | 117hp | 86kw | 2010-now |
| Important notes:Construction year from: 201105;Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | LANCER VIII Sportback (CX_A) | 4B10 | Petrol | 1.8 | 140hp | 103kw | 2009-now |
| Important notes:Construction year from: 201105;Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | LANCER VIII Sportback (CX_A) | 4B10 | Petrol | 1.8 | 143hp | 105kw | 2008-now |
| Important notes:Construction year from: 201105;Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | LANCER VIII Sportback (CX_A) | 4B11 T/C | Petrol | 2.0 | 241hp | 177kw | 2008-now |
| Important notes:Construction year from: 201105;Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | LANCER VIII Sportback (CX_A) | 4B11-T/C | Petrol | 2.0 | 241hp | 177kw | 2008-now |
| Important notes:Construction year from: 201105;Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | LANCER VIII Sportback (CX_A) | 4N13 | Diesel | 1.8 | 116hp | 85kw | 2010-now |
| Important notes:Construction year from: 201105;Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | LANCER VIII Sportback (CX_A) | 4N13 | Diesel | 1.8 | 150hp | 110kw | 2010-now |
| Important notes:Construction year from: 201105;Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | LANCER VIII Sportback (CX_A) | BKD | Diesel | 2.0 | 140hp | 103kw | 2008-now |
| Important notes:Construction year from: 201105;Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | LANCER VIII Sportback (CX_A) | BWC | Diesel | 2.0 | 140hp | 103kw | 2008-now |
| Important notes:Construction year from: 201105;Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | OUTLANDER II (CW_W) | 6B31 | Petrol | 3.0 | 223hp | 164kw | 2006-2010 |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | OUTLANDER II (CW_W) | 6B31 | Petrol | 3.0 | 230hp | 169kw | 2010-2012 |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | OUTLANDER III (GG_W, GF_W, ZJ, ZL) | 4B11 | Petrol/Electric | 2.0 | 200hp | 147kw | 2014-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | OUTLANDER III (GG_W, GF_W, ZJ, ZL) | 4B11 | Petrol | 2.0 | 146hp | 107kw | 2012-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | OUTLANDER III (GG_W, GF_W, ZJ, ZL) | 4B12 | Petrol/Electric | 2.4 | 208hp | 153kw | 2018-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right;Vehicle type: Outlander;Vehicle type: Outlander Van | |||||||
| MITSUBISHI | OUTLANDER III (GG_W, GF_W, ZJ, ZL) | 4B12 | Petrol | 2.4 | 167hp | 123kw | 2012-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | OUTLANDER III (GG_W, GF_W, ZJ, ZL) | 4B12 | Petrol | 2.4 | 169hp | 124kw | 2012-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | OUTLANDER III (GG_W, GF_W, ZJ, ZL) | 4J11 | Petrol/Liquified Petroleum Gas (LPG) | 2.0 | 146hp | 107kw | 2012-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | OUTLANDER III (GG_W, GF_W, ZJ, ZL) | 4J11 | Petrol | 2.0 | 150hp | 110kw | 2012-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | OUTLANDER III (GG_W, GF_W, ZJ, ZL) | 4J11 | Petrol | 2.0 | 152hp | 112kw | 2013-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | OUTLANDER III (GG_W, GF_W, ZJ, ZL) | 4J12 | Petrol | 2.4 | 169hp | 124kw | 2012-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | OUTLANDER III (GG_W, GF_W, ZJ, ZL) | 4N14 | Diesel | 2.2 | 150hp | 110kw | 2012-now |
| Important notes:Block Separation: ;Fitting Position: Left;Fitting Position: outer;Fitting Position: Right;Vehicle type: Outlander;Vehicle type: Outlander Van | |||||||
| MITSUBISHI | OUTLANDER III (GG_W, GF_W, ZJ, ZL) | 4N14 | Diesel | 2.2 | 150hp | 110kw | 2012-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | OUTLANDER III (GG_W, GF_W, ZJ, ZL) | 4N14 | Diesel | 2.2 | 179hp | 132kw | 2015-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | OUTLANDER III (GG_W, GF_W, ZJ, ZL) | 6B31 | Petrol | 3.0 | 224hp | 165kw | 2014-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | OUTLANDER III (GG_W, GF_W, ZJ, ZL) | 6B31 | Petrol | 3.0 | 227hp | 167kw | 2012-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | OUTLANDER III (GG_W, GF_W, ZJ, ZL) | 6B31 | Petrol | 3.0 | 230hp | 169kw | 2014-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | OUTLANDER III (GG_W, GF_W, ZJ, ZL) | S61 | Petrol/Electric | 2.0 | 200hp | 147kw | 2014-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | OUTLANDER III (GG_W, GF_W, ZJ, ZL) | Y61 | Petrol/Electric | 2.0 | 200hp | 147kw | 2014-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | OUTLANDER III (GG_W, GF_W, ZJ, ZL, ZK) | 4B11 | Petrol/Electric | 2.0 | 200hp | 147kw | 2014-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | OUTLANDER III (GG_W, GF_W, ZJ, ZL, ZK) | 4B11 | Petrol | 2.0 | 146hp | 107kw | 2012-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | OUTLANDER III (GG_W, GF_W, ZJ, ZL, ZK) | 4B12 | Petrol/Electric | 2.4 | 208hp | 153kw | 2018-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right;Vehicle type: Outlander;Vehicle type: Outlander Van | |||||||
| MITSUBISHI | OUTLANDER III (GG_W, GF_W, ZJ, ZL, ZK) | 4B12 | Petrol | 2.4 | 167hp | 123kw | 2012-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | OUTLANDER III (GG_W, GF_W, ZJ, ZL, ZK) | 4B12 | Petrol | 2.4 | 169hp | 124kw | 2012-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | OUTLANDER III (GG_W, GF_W, ZJ, ZL, ZK) | 4J11 | Petrol/Liquified Petroleum Gas (LPG) | 2.0 | 146hp | 107kw | 2012-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | OUTLANDER III (GG_W, GF_W, ZJ, ZL, ZK) | 4J11 | Petrol | 2.0 | 150hp | 110kw | 2012-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | OUTLANDER III (GG_W, GF_W, ZJ, ZL, ZK) | 4J11 | Petrol | 2.0 | 152hp | 112kw | 2013-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | OUTLANDER III (GG_W, GF_W, ZJ, ZL, ZK) | 4J12 | Petrol | 2.4 | 169hp | 124kw | 2012-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | OUTLANDER III (GG_W, GF_W, ZJ, ZL, ZK) | 4N14 | Diesel | 2.2 | 150hp | 110kw | 2012-now |
| Important notes:Block Separation: ;Fitting Position: Left;Fitting Position: outer;Fitting Position: Right;Vehicle type: Outlander;Vehicle type: Outlander Van | |||||||
| MITSUBISHI | OUTLANDER III (GG_W, GF_W, ZJ, ZL, ZK) | 4N14 | Diesel | 2.2 | 150hp | 110kw | 2012-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | OUTLANDER III (GG_W, GF_W, ZJ, ZL, ZK) | 4N14 | Diesel | 2.2 | 179hp | 132kw | 2015-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | OUTLANDER III (GG_W, GF_W, ZJ, ZL, ZK) | 6B31 | Petrol | 3.0 | 224hp | 165kw | 2014-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | OUTLANDER III (GG_W, GF_W, ZJ, ZL, ZK) | 6B31 | Petrol | 3.0 | 227hp | 167kw | 2012-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | OUTLANDER III (GG_W, GF_W, ZJ, ZL, ZK) | 6B31 | Petrol | 3.0 | 230hp | 169kw | 2014-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | OUTLANDER III (GG_W, GF_W, ZJ, ZL, ZK) | S61 | Petrol/Electric | 2.0 | 200hp | 147kw | 2014-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| MITSUBISHI | OUTLANDER III (GG_W, GF_W, ZJ, ZL, ZK) | Y61 | Petrol/Electric | 2.0 | 200hp | 147kw | 2014-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| PEUGEOT | 4008 | 4A92 | Petrol | 1.6 | 117hp | 86kw | 2012-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| PEUGEOT | 4008 | 6HZ (4N13) | Diesel | 1.8 | 150hp | 110kw | 2012-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| PEUGEOT | 4008 | 9HD (DV6C) | Diesel | 1.6 | 114hp | 84kw | 2012-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
SIMILAR PRODUCTS FOR YOUR VEHICLE
Control Arm/Trailing Arm, wheel suspension
Art-Nr: TC3272
Length [mm]: 375 mm
Height [mm]: 50 mm
Width [mm]: 125 mm
Control/Trailing Arm Type: Trailing Arm
Thread Size 2: Bush 12.2
$35.22
no VAT req.
Available: 5
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Track Control Arm
Art-Nr: 850042528
Length [mm]: 315 mm
Required quantity: 2
Supplementary Article/Info 2: with rubber mounting
Steering arm type: Semi-trailing Arm
$23.12
no VAT req.
Available: 10+
Special Order
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
?
Handling time: About 30 business day(s)
Handling Time: About 30 business day(s)
The item should be shipped within 15 business day(s) of receiving cleared payment.
?
The item should be shipped within 30 business day(s) of receiving cleared payment.
Add to wishlist
Rod/Strut, wheel suspension
Art-Nr: 850080636
Required quantity: 2
Rod/Strut: Guide Rod
Length [mm]: 316 mm
$25.90
no VAT req.
Available: 10+
Special Order
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
?
Handling time: About 30 business day(s)
Handling Time: About 30 business day(s)
The item should be shipped within 15 business day(s) of receiving cleared payment.
?
The item should be shipped within 30 business day(s) of receiving cleared payment.
Add to wishlist
Track Control Arm
Art-Nr: SCA-5647
Steering arm type: Trailing Arm
Fitting Position: Rear Axle left and right
$25.58
no VAT req.
Available: 4
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
Control Arm-/Trailing Arm Bush
Art-Nr: MABCU20UP
Weight [kg]: 0,175 kg
Packaging width [cm]: 4,0 cm
Packaging length [cm]: 5,0 cm
Packaging height [cm]: 4,0 cm
Fitting Position: Rear Axle Upper
Fitting Position: Outer
$4.08
no VAT req.
Available: 10+
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
Control Arm-/Trailing Arm Bush
Art-Nr: MAB107
Weight [kg]: 0,15 kg
Packaging width [cm]: 3,7 cm
Packaging length [cm]: 5,1 cm
Packaging height [cm]: 3,7 cm
Fitting Position: Rear Axle Upper
Fitting Position: Rear
$4.92
no VAT req.
Available: 5
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
Bush, control arm mounting
Art-Nr: 00448074
Quantity per Axle: 4
Fitting Position: Rear Axle left and right
Steering arm type: for control arm
Fitting Position: Outer
Fitting Position: inner
Fitting Position: Front
Fitting Position: Rear Axle Upper
$7.21
no VAT req.
Available: 1
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
Track Control Arm
Art-Nr: 71519
Inner diameter [mm]: 12 mm
Fitting Position: Upper
Fitting Position: Rear Axle
Width [mm]: 50 mm
Length [mm]: 375 mm
$40.65
no VAT req.
Available: 4
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
Track Control Arm
Art-Nr: 0425CU20UP
Weight [kg]: 1,991 kg
Steering arm type: Control Arm
Packaging width [cm]: 11,5 cm
Packaging length [cm]: 37,0 cm
Packaging height [cm]: 6,0 cm
Fitting Position: Transverse
Fitting Position: Rear Axle Upper
$30.14
no VAT req.
Available: 10+
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
Control Arm-/Trailing Arm Bush
Art-Nr: 516170
Fitting Position: Rear Axle
$2.40
no VAT req.
Available: 10+
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
ACKOJAP Control Arm/Swing Arm Joint
Control Arm/Trailing Arm, wheel suspension
Art-Nr: A32-1137
Fitting Position: Front Axle
Fitting Position: Left
Control/Trailing Arm Type: Control Arm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$57.11
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Control Arm/Trailing Arm, wheel suspension
Art-Nr: A32-1138
Fitting Position: Front Axle
Fitting Position: Right
Control/Trailing Arm Type: Control Arm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$57.11
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Control Arm/Trailing Arm, wheel suspension
Art-Nr: A32-1142
Fitting Position: Rear Axle
Control/Trailing Arm Type: Control Arm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$44.00
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Control Arm/Trailing Arm, wheel suspension
Art-Nr: A37-1141
Fitting Position: Lower Front Axle
Fitting Position: Right
Control/Trailing Arm Type: Control Arm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$32.65
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Mounting, control/trailing arm
Art-Nr: A38-0208
Required quantity: 2
Fitting Position: Front Axle
Fitting Position: Front
Mounting Type: Rubber-Metal Mount
Control/Trailing Arm Type: for control arm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$2.80
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Control Arm/Trailing Arm, wheel suspension
Art-Nr: A38-1160
Fitting Position: Lower
Cone Size [mm]: 16 mm
Fitting Position: Front Axle Right
Control/Trailing Arm Type: Control Arm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$44.78
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Control Arm/Trailing Arm, wheel suspension
Art-Nr: A52-0246
Fitting Position: Front Axle Right
paired article number: A52-0247
Control/Trailing Arm Type: Control Arm
Article number of the recommended special tool: V99-1020
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$117.18
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Control Arm/Trailing Arm, wheel suspension
Art-Nr: A64-1118
Fitting Position: Front Axle Left
Control/Trailing Arm Type: Control Arm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$41.61
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Control Arm/Trailing Arm, wheel suspension
Art-Nr: A64-1119
Fitting Position: Front Axle Right
Control/Trailing Arm Type: Control Arm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$45.32
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Mounting, control/trailing arm
Art-Nr: A70-0464
Fitting Position: Rear
Length [mm]: 89 mm
Inner diameter [mm]: 14.5 mm
Outer diameter [mm]: 56 mm
Mounting Type: Rubber-Metal Mount
Fitting Position: Front Axle
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$10.89
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
