$97.49
no VAT req.
Available: 10+
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
$97.49
Have questions about this item?
You can pay for your order using any of these types of cards: Visa, MasterCard; as well as through these payment systems: PayPal and Bank transfer. All orders need to be prepaid to start processing. The parts are not reserved until the payment is received.
We provide worldwide shipping, but some parts cannot be processed in an automatic way. In all those cases the manager will contact you and will offer special delivery.
Drive Shaft
Art-Nr: 241481
Supplier:
GSP
Product info
Seal Diameter [mm]:
56 mm
Outer teething differential side:
29
Outer gearing wheel side:
Length [mm]:
615 mm
Fitting Position:
Axle Position 1
Category:
Drive Shaft
Condition:
new
Item Number:
241481
Brand
Code
EAI
T98421
GSP
241481
GSP
GDS41481
NISSAN
39101JG74B
| Brand | Model | Engine code | Fuel | Displacement | HP | KW | Year |
| NISSAN | X-TRAIL II (T31) | M9R 760 | Diesel | 2.0 | 173hp | 127kw | 2007-2013 |
| Important notes:Drive Type: All-wheel Drive;Fitting Position: Front Axle Left | |||||||
| NISSAN | X-TRAIL II (T31) | M9R | Diesel | 2.0 | 150hp | 110kw | 2007-2013 |
| Important notes:Drive Type: All-wheel Drive;Fitting Position: Front Axle Left | |||||||
| NISSAN | X-TRAIL II (T31) | M9R | Diesel | 2.0 | 150hp | 110kw | 2007-2013 |
| Important notes:Drive Type: Front Wheel Drive;Fitting Position: Front Axle Left | |||||||
SIMILAR PRODUCTS FOR YOUR VEHICLE
Link/Coupling Rod, stabiliser bar
Art-Nr: V30-7416
Rod/Strut: Suspension Rod
Fitting Position: Front Axle
Fitting Position: Rear
Weight [kg]: 0,181 kg
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$8.42
no VAT req.
Available: 10+
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Link/Coupling Rod, stabiliser bar
Art-Nr: 53037809
Fitting Position: Rear Axle Right
Fitting Position: Rear Axle Left
Rod/Strut: Suspension Rod
Length [mm]: 200 mm
Warranty: 3 years warranty or until 75,000km
$8.18
no VAT req.
Available: 10+
Special Order
Handling time: About 10 business day(s)
Handling Time: About 10 business day(s)
?
Handling time: About 30 business day(s)
Handling Time: About 30 business day(s)
The item should be shipped within 10 business day(s) of receiving cleared payment.
?
The item should be shipped within 30 business day(s) of receiving cleared payment.
Add to wishlist
Coolant pump
Art-Nr: 9A712101304
Options: Coolant pump
$297.04
no VAT req.
Special Order
Handling time: About 10 business day(s)
Handling Time: About 10 business day(s)
?
The item should be shipped within 10 business day(s) of receiving cleared payment.
Add to wishlist
Link/Coupling Rod, stabiliser bar
Art-Nr: 0160600003
Thread Size: M10x1,5
Supplementary Article/Info 2: with rubber mounting
Rod/Strut: Coupling Rod
Material: Metal
Length [mm]: 200 mm
Inner diameter [mm]: 8,3 mm
Fitting Position: Rear Axle Right
Fitting Position: Rear Axle Left
$10.08
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 10 business day(s)
Handling Time: About 10 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 10 business day(s) of receiving cleared payment.
Add to wishlist
Brake Caliper
Art-Nr: 24.3451-8503.5
paired article number: 24.3451-8504.5
Supplementary Article/Supplementary Info: without holder
Piston Diameter [mm]: 45 mm
Brake Caliper Type: Fist-type Caliper (2 pistons)
$97.10
no VAT req.
Available: 5
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Drive Shaft
Art-Nr: 492450
Outer teething differential side: 29
Outer gearing wheel side: 29
Length [mm]: 615 mm
$96.37
no VAT req.
Available: 10+
Available: 10+
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
Handling time: About 3 business day(s)
Handling Time: About 3 business day(s)
The item should be shipped within 2 business day(s) of receiving cleared payment.
?
The item should be shipped within 3 business day(s) of receiving cleared payment.
Add to wishlist
GSP Drive Shaft
Drive Shaft
Art-Nr: 262031
Seal Diameter [mm]: 56,5 mm
Outer teething differential side: 26
Outer gearing wheel side: 36
Number of Teeth, ABS ring: 48
Length [mm]: 992 mm
Fitting Position: Axle Position 1
$120.78
no VAT req.
Available: 10+
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
Drive Shaft
Art-Nr: 245085
Seal Diameter [mm]: 49 mm
Outer teething differential side: 23
Outer gearing wheel side: 21
Length [mm]: 763 mm
$72.09
no VAT req.
Available: 10+
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
Drive Shaft
Art-Nr: 218194
Seal Diameter [mm]: 56 mm
Outer teething differential side: 26
Outer gearing wheel side: 36
Length [mm]: 568 mm
Fitting Position: Axle Position 1
$68.19
no VAT req.
Available: 10+
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
Drive Shaft
Art-Nr: 218293
Transmission Type: Manual Transmission
Seal Diameter [mm]: 59 mm
Outer teething differential side: 41
Outer gearing wheel side: 28
Number of Teeth, ABS ring: 48
Length [mm]: 754 mm
Fitting Position: Front Axle Left
Drive Type: Front Wheel Drive
$96.54
no VAT req.
Available: 10+
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
Drive Shaft
Art-Nr: 218292
Transmission Type: Manual Transmission
Seal Diameter [mm]: 59 mm
Outer teething differential side: 41
Outer gearing wheel side: 28
Number of Teeth, ABS ring: 48
Length [mm]: 1093 mm
Fitting Position: Front Axle Right
Drive Type: Front Wheel Drive
$112.02
no VAT req.
Available: 10+
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
Drive Shaft
Art-Nr: 218358
Seal Diameter [mm]: 56 mm
Outer teething differential side: 23
Outer gearing wheel side: 36
Length [mm]: 899 mm
Fitting Position: Axle Position 1
$91.56
no VAT req.
Available: 10+
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
Drive Shaft
Art-Nr: 218206
Seal Diameter [mm]: 56 mm
Outer teething differential side: 23
Outer gearing wheel side: 36
Length [mm]: 906 mm
Fitting Position: Axle Position 1
$75.67
no VAT req.
Available: 10+
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
Drive Shaft
Art-Nr: 218359
Seal Diameter [mm]: 56 mm
Outer teething differential side: 23
Outer gearing wheel side: 36
Length [mm]: 594 mm
Fitting Position: Axle Position 1
$86.21
no VAT req.
Available: 10+
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
Drive Shaft
Art-Nr: 210248
Seal Diameter [mm]: 58,5 mm
Outer teething differential side: 24
Outer gearing wheel side: 25
Length [mm]: 642 mm
Fitting Position: Axle Position 1
$63.71
no VAT req.
Available: 10+
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
Drive Shaft
Art-Nr: 210291
Seal Diameter [mm]: 58,5 mm
Outer teething differential side: 26
Outer gearing wheel side: 25
Length [mm]: 833 mm
Fitting Position: Axle Position 1
$127.41
no VAT req.
Available: 10+
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
