Temporarily unavailable
Have questions about this item?
$0.00
Have questions about this item?
You can pay for your order using any of these types of cards: Visa, MasterCard; as well as through these payment systems: PayPal and Bank transfer. All orders need to be prepaid to start processing. The parts are not reserved until the payment is received.
We provide worldwide shipping, but some parts cannot be processed in an automatic way. In all those cases the manager will contact you and will offer special delivery.
Brake Disc
Art-Nr: A70-40023
Supplier:
ACKOJAP
Product info
Rim Hole Number:
5 -Hole
Outer diameter [mm]:
259 mm
Minimum thickness [mm]:
9 mm
Height [mm]:
31 mm
Centering Diameter [mm]:
55 mm
Brake Disc Type:
Solid
Brake Disc Thickness [mm]:
9 mm
Brake Disc Hub Height [mm]:
22 mm
Bolt Hole Circle Ø [mm]:
100 mm
Additional Info:
In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
EAN:
4062375263783
Category:
Brake Disc
Condition:
new
Item Number:
A7040023
Brand
Code
A.B.S.
08.A534.31
A.B.S.
18052
ABE
C42077ABE
ACKOJAP
A70-40023
AP
15050
AP
15050 V
APEC
SDK6651
APEC
DSK2811
ASHIKA
61-02-241C
ASHIKA
61-02-241
ASHUKI by Palidium
0993-2602
ATE
24.0109-0163.1
BLUE PRINT
ADT343277
BORG & BECK
BBD5173
BOSCH
0 986 479 721
BOSCH
0 986 AB5 278
BRAXIS
AE0403
BRECO
BV 6042
BRECO
BS 6042
BREMBO
08.A534.31
BREMBO
08.A534.30
BREMSI
CD7875S
BSF
11852
Brake ENGINEERING
DI956825
CAR
142.1540
CIFAM
800-1305C
COMLINE
AND6400
COMLINE
ADC01149
DELPHI
BG4201
DELPHI
BG4201C
DON
PCD13442
DYNAMATRIX
DBD1875C
Dr!ve+
DP1010.11.1511
E.T.F.
19-2651
EUROBRAKE
58152045143
EUROBRAKE
58153145143
FEBI BILSTEIN
108503
FERODO
DDF1875C
FERODO
DDF1875C-1-D
FIT
FR0761
FREMAX
BD-2049
FTE
BS7637B
FTE
BS7637
GIRLING
6061454
HELLA
8DD 355 116-901
HELLA PAGID
8DD 355 116-901
HERTH+BUSS JAKOPARTS
J3312065
JAPANPARTS
DP-241
JAPANPARTS
DP-241C
JAPKO
61241
JAPKO
61241C
JP GROUP
4863202800
JURATEK
TOY303
JURID
562751JC
KAISHIN
CBR453
KAMOKA
103500
KAVO PARTS
BR-9484-C
KAWE
61326 00
LPR
T2069P
LYNXauto
BN-1626
MAGNETI MARELLI
360406116800
MAGNETI MARELLI
360406116801
MAGNETI MARELLI
600000090810
MAPCO
25579
MASTER-SPORT GERMANY
24010901631-PCS-MS
MDR
MRD-2241
METELLI
23-1305C
METZGER
6110617
MEYLE
30-15 523 0107/PD
MGA
D1933
MINTEX
MDC2203
MOTAQUIP
LVBD1651
NATIONAL
NBD1744
NIPPARTS
N3312062
NISSHINBO
ND1012K
NK
2045143
NK
3145143
NPS
T331A61
NiBK
RN1626
OPEN PARTS
BDA2524.10
OPTIMAL
BS-9106C
OPTIMAL
BS-9106
PAGID
55240
PEMEBLA
JAPDP-241
PILENGA
5496
PROTECHNIC
PRD5410
QUARO
QD7105
QUINTON HAZELL
BDC5944
REMSA
61326.00
ROADHOUSE
61326.00
ROTINGER
RT 1804-GL T3
ROTINGER
RT 1804-GL T5
ROTINGER
RT 1804-GL
ROTINGER
RT 1804-GL T6
ROTINGER
RT 1804
SAKURA
605-20-3741
ST-TEMPLIN
53.110.28980
ST-TEMPLIN
53.111.28980
STELLOX
6020-1149-SX
SUBARU
42431-12310
SWAG
33 10 7064
TEXTAR
92224003
TEXTAR
92224000
TOYOTA
42431-12310
TRISCAN
8120 131045C
TRUSTING
DF1440
TRW
DF7425
TRW
DF6145
VALEO
672540
VALEO
197491
VILLAR
628.2270
WOKING
D61326.00
ZEKKERT
BS-5665
ZIMMERMANN
590.2819.20
fri.tech.
BD1440
sbs
18153145143
sbs
18152045143
| Brand | Model | Engine code | Fuel | Displacement | HP | KW | Year |
| LEXUS | CT (ZWA10_) | 2ZR-FXE | Petrol/Electric | 1.8 | 99hp | 73kw | 2010-2020 |
| Important notes:Fitting Position: Rear Axle | |||||||
| LEXUS | CT (ZWA10_) | 5ZR-FXE | Petrol/Electric | 1.8 | 99hp | 73kw | 2010-2020 |
| Important notes:Fitting Position: Rear Axle | |||||||
| SUBARU | TREZIA | 1ND-TV | Diesel | 1.4 | 90hp | 66kw | 2011-now |
| Important notes:Braking System: for vehicles with disc brakes on the rear axle;Fitting Position: Rear Axle | |||||||
| SUBARU | TREZIA | 1NR-FE | Petrol | 1.3 | 99hp | 73kw | 2011-now |
| Important notes:Braking System: for vehicles with disc brakes on the rear axle;Fitting Position: Rear Axle | |||||||
| SUBARU | TREZIA | 1NR-FKE | Petrol | 1.3 | 99hp | 73kw | 2011-now |
| Important notes:Braking System: for vehicles with disc brakes on the rear axle;Fitting Position: Rear Axle | |||||||
| TOYOTA | COROLLA Saloon (E15_) | 2ZR-FAE | Petrol | 1.8 | 135hp | 99kw | 2008-2012 |
| Important notes:Fitting Position: Rear Axle | |||||||
| TOYOTA | COROLLA Saloon (E15_) | 2ZR-FE | Petrol | 1.8 | 132hp | 97kw | 2008-2014 |
| Important notes:Braking System: for vehicles with disc brakes on the rear axle;Fitting Position: Rear Axle | |||||||
| TOYOTA | COROLLA Saloon (E15_) | 2ZR-FE | Petrol | 1.8 | 135hp | 99kw | 2008-2012 |
| Important notes:Fitting Position: Rear Axle | |||||||
| TOYOTA | COROLLA Saloon (_E15_) | 2ZR-FAE | Petrol | 1.8 | 135hp | 99kw | 2008-2012 |
| Important notes:Fitting Position: Rear Axle | |||||||
| TOYOTA | COROLLA Saloon (_E15_) | 2ZR-FE | Petrol | 1.8 | 132hp | 97kw | 2008-2014 |
| Important notes:Braking System: for vehicles with disc brakes on the rear axle;Fitting Position: Rear Axle | |||||||
| TOYOTA | COROLLA Saloon (_E15_) | 2ZR-FE | Petrol | 1.8 | 135hp | 99kw | 2008-2012 |
| Important notes:Fitting Position: Rear Axle | |||||||
| TOYOTA | COROLLA Saloon (_E18_, ZRE1_) | 1ZR-F | Petrol | 1.6 | 128hp | 96kw | 2016-2018 |
| Important notes:Fitting Position: Rear Axle | |||||||
| TOYOTA | COROLLA Saloon (_E18_, ZRE1_) | 3ZR-FE | Petrol | 2.0 | 143hp | 105kw | 2013-2018 |
| Important notes:Fitting Position: Rear Axle | |||||||
| TOYOTA | COROLLA Saloon (_E18_, ZRE1_) | 3ZR-FE | Petrol | 2.0 | 145hp | 107kw | 2014-2019 |
| Important notes:Fitting Position: Rear Axle | |||||||
| TOYOTA | COROLLA Saloon (_E21_) | M20A-FKS | Petrol | 2.0 | 170hp | 125kw | 2019-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| TOYOTA | PRIUS (_W3_) | 2ZR-FXE | Petrol/Electric | 1.8 | 136hp | 100kw | 2008-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| TOYOTA | PRIUS (_W3_) | 2ZR-FXE | Petrol/Electric | 1.8 | 136hp | 100kw | 2009-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| TOYOTA | PRIUS (_W5_) | 2ZR-FXE | Petrol/Electric | 1.8 | 122hp | 90kw | 2015-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| TOYOTA | PRIUS PHV (_W52_) | 2ZR-FXE | Petrol/Electric | 1.8 | 122hp | 90kw | 2016-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| TOYOTA | PRIUS PHV (_W52_) | 2ZR-FXE | Petrol/Electric | 1.8 | 122hp | 90kw | 2017-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| TOYOTA | VERSO S (_P12_) | 1ND-TV | Diesel | 1.4 | 90hp | 66kw | 2010-2016 |
| Important notes:Braking System: for vehicles with disc brakes on the rear axle;Fitting Position: Rear Axle | |||||||
| TOYOTA | VERSO S (_P12_) | 1NR-FE | Petrol | 1.33 | 99hp | 73kw | 2010-2016 |
| Important notes:Braking System: for vehicles with disc brakes on the rear axle;Fitting Position: Rear Axle | |||||||
SIMILAR PRODUCTS FOR YOUR VEHICLE
Disc, Rear
Art-Nr: 42431-12310
Category: REAR AXLE SHAFT & HUB
Fitting Position: REAR
Left-hand / Right-hand Traffic: RHD, LHD
$55.84
no VAT req.
Special Order
Handling time: About 30 business day(s)
Handling Time: About 30 business day(s)
?
The item should be shipped within 30 business day(s) of receiving cleared payment.
Add to wishlist
Brake Disc
Art-Nr: 4863202800
Fitting Position: Rear Axle
Brake Disc Type: Solid
Brake Disc Thickness [mm]: 9 mm
Surface: Coated
Outer diameter [mm]: 259 mm
Number of Holes: 5
$18.14
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Brake Disc
Art-Nr: 360406116801
Tightening Torque [Nm]: 103 Nm
Bolt Hole Circle Ø [mm]: 55 mm
Number of Holes: 5
Minimum thickness [mm]: 7.5 mm
Brake Disc Thickness [mm]: 9 mm
Height [mm]: 30.3 mm
Diameter [mm]: 259 mm
Brake Disc Type: Solid
Surface: UV paint coated
Outer diameter [mm]: 259 mm
$35.37
no VAT req.
Special Order
Handling time: About 30 business day(s)
Handling Time: About 30 business day(s)
?
The item should be shipped within 30 business day(s) of receiving cleared payment.
Add to wishlist
Brake Disc
Art-Nr: BG4201C
Brake Disc Type: Solid
Number of Holes: 5
Brake Disc Thickness [mm]: 9 mm
Centering Diameter [mm]: 55 mm
Height [mm]: 30 mm
Minimum thickness [mm]: 8 mm
Outer diameter [mm]: 259 mm
Machining: Untreated
Surface: Coated
Supplementary Article/Info 2: without ABS sensor ring
Supplementary Article/Info 2: without wheel bearing
Test Mark: E1 90R-02C0250/1204
$20.97
no VAT req.
Available: 5
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Brake Disc
Art-Nr: ADT343277
Weight [kg]: 3,350 kg
Surface: Coated
Bolt Hole Circle Ø [mm]: 100 mm
Centering Diameter [mm]: 55 mm
Minimum thickness [mm]: 7.5 mm
Fitting Position: Rear Axle
Brake Disc Type: Solid
Number of mounting bores: 2
Brake Disc Thickness [mm]: 9 mm
Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
for OE number: 42431-12310
Outer diameter [mm]: 259 mm
Thickness [mm]: 30 mm
Rim Hole Number: 5 -Hole
$19.20
no VAT req.
Available: 8
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Brake Disc
Art-Nr: 672540
Rim Hole Number: 5 -Hole
Minimum thickness [mm]: 7.5 mm
Height [mm]: 30.4 mm
Centering Diameter [mm]: 55 mm
Brake Disc Thickness [mm]: 9 mm
Outer diameter [mm]: 259 mm
Surface: Coated
Brake Disc Type: Solid
Fitting Position: Rear Axle
Weight [kg]: 6,63 kg
$48.48
no VAT req.
Available: 4
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Brake Disc
Art-Nr: 108503
Centering Diameter [mm]: 55 mm
Minimum thickness [mm]: 7.5 mm
Fitting Position: Rear Axle
Brake Disc Type: Solid
Surface: Coated
Bolt Hole Circle Ø [mm]: 100 mm
Thickness [mm]: 30.2 mm
Number of mounting bores: 2
Brake Disc Thickness [mm]: 9 mm
Weight [kg]: 3,350 kg
Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
for OE number: 42431-12310
Outer diameter [mm]: 259 mm
Rim Hole Number: 5 -Hole
$21.71
no VAT req.
Available: 8
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Brake Disc
Art-Nr: 24.0109-0163.1
Fitting Position: Rear Axle
Surface: Coated
Outer diameter [mm]: 259,0 mm
Number of Holes: 5
Minimum thickness [mm]: 7,5 mm
Inner diameter [mm]: 156,2 mm
Height [mm]: 30,2 mm
Centering Diameter [mm]: 55,0 mm
Brake Disc Type: Solid
Brake Disc Thickness [mm]: 9,0 mm
Bore Ø [mm]: 14,5 mm
Bolt Hole Circle Ø [mm]: 100,0 mm
Test Mark: E1 90R-02C0165/0839
$37.31
no VAT req.
Available: 8
Available: 8
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 30 business day(s)
Handling Time: About 30 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 30 business day(s) of receiving cleared payment.
Add to wishlist
Brake Disc
Art-Nr: 08A53431
Tightening Torque [Nm]: 103 Nm
Surface: Coated
Number of Holes: 5
Minimum thickness [mm]: 7,5 mm
Height [mm]: 30,3 mm
Diameter [mm]: 259 mm
Centering Diameter [mm]: 55 mm
Brake Disc Type: Solid
Brake Disc Thickness [mm]: 9 mm
$26.86
no VAT req.
Available: 6
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
Brake Disc
Art-Nr: DF6145
Height [mm]: 30,5 mm
Colour: Black
Centering Diameter [mm]: 55 mm
Brake Disc Type: Solid
Brake Disc Thickness [mm]: 9 mm
Bolt Hole Circle Ø [mm]: 100 mm
Thread Size 2: M8
Thread Size 1: 14,6
Surface: Painted
Outer diameter [mm]: 259 mm
Number of Holes: 5
Minimum thickness [mm]: 7,5 mm
Inspection Tag: E190R02 02C0190/0367
$24.40
no VAT req.
Available: 10+
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
ACKOJAP Brake Disc
Brake Disc
Art-Nr: A52-40006
Centering Diameter [mm]: 76 mm
Minimum thickness [mm]: 8.4 mm
Brake Disc Thickness [mm]: 10 mm
Brake Disc Type: Solid
Height [mm]: 61 mm
Bolt Hole Circle Ø [mm]: 114.3 mm
Rim Hole Number: 4 -Hole
Outer diameter [mm]: 262 mm
Brake Disc Hub Height [mm]: 51 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$19.32
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Brake Disc
Art-Nr: A37-80006
Centering Diameter [mm]: 87 mm
Minimum thickness [mm]: 22.4 mm
Brake Disc Thickness [mm]: 24 mm
Brake Disc Type: Vented
Height [mm]: 45.1 mm
Bolt Hole Circle Ø [mm]: 108 mm
Rim Hole Number: 6 -Hole
Outer diameter [mm]: 276 mm
Brake Disc Hub Height [mm]: 21,1 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$20.37
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Brake Disc
Art-Nr: A52-40004
Centering Diameter [mm]: 76 mm
Minimum thickness [mm]: 8 mm
Brake Disc Thickness [mm]: 10 mm
Brake Disc Type: Solid
Height [mm]: 40.4 mm
Bolt Hole Circle Ø [mm]: 114.3 mm
Rim Hole Number: 4 -Hole
Outer diameter [mm]: 258 mm
Brake Disc Hub Height [mm]: 30,4 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$17.69
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Brake Disc
Art-Nr: A37-40001
Minimum thickness [mm]: 8.4 mm
Brake Disc Thickness [mm]: 10 mm
Brake Disc Type: Solid
Height [mm]: 41 mm
Bolt Hole Circle Ø [mm]: 114.3 mm
Centering Diameter [mm]: 90 mm
Rim Hole Number: 4 -Hole
Outer diameter [mm]: 260 mm
Fitting Position: Rear Axle
Brake Disc Hub Height [mm]: 31 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$47.86
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Brake Disc
Art-Nr: A26-80005
Minimum thickness [mm]: 21 mm
Brake Disc Thickness [mm]: 23 mm
Brake Disc Type: Vented
Height [mm]: 47.1 mm
Bolt Hole Circle Ø [mm]: 114.3 mm
Centering Diameter [mm]: 70.2 mm
Fitting Position: Front Axle
Rim Hole Number: 5 -Hole
Outer diameter [mm]: 282 mm
Brake Disc Hub Height [mm]: 24,1 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$29.28
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Brake Disc
Art-Nr: A32-80001
Minimum thickness [mm]: 22 mm
Brake Disc Thickness [mm]: 24 mm
Brake Disc Type: Vented
Height [mm]: 48.6 mm
Bolt Hole Circle Ø [mm]: 114.3 mm
Centering Diameter [mm]: 72 mm
Fitting Position: Front Axle
Rim Hole Number: 5 -Hole
Outer diameter [mm]: 258 mm
Brake Disc Hub Height [mm]: 24,6 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$25.73
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Brake Disc
Art-Nr: A26-80004
Minimum thickness [mm]: 15 mm
Brake Disc Thickness [mm]: 17 mm
Brake Disc Type: Vented
Height [mm]: 44 mm
Bolt Hole Circle Ø [mm]: 100 mm
Centering Diameter [mm]: 61 mm
Fitting Position: Front Axle
Rim Hole Number: 4 -Hole
Outer diameter [mm]: 231 mm
Brake Disc Hub Height [mm]: 27 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$17.92
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Brake Disc
Art-Nr: A32-40008
Centering Diameter [mm]: 55 mm
Minimum thickness [mm]: 8 mm
Brake Disc Thickness [mm]: 10 mm
Brake Disc Type: Solid
Height [mm]: 39.9 mm
Bolt Hole Circle Ø [mm]: 100 mm
Rim Hole Number: 4 -Hole
Outer diameter [mm]: 261 mm
Brake Disc Hub Height [mm]: 29,9 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$15.91
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Brake Disc
Art-Nr: A26-80021
Centering Diameter [mm]: 92 mm
Minimum thickness [mm]: 23 mm
Brake Disc Thickness [mm]: 25 mm
Brake Disc Type: Vented
Height [mm]: 34.5 mm
Bolt Hole Circle Ø [mm]: 114.3 mm
Rim Hole Number: 4 -Hole
Outer diameter [mm]: 282 mm
Fitting Position: Front Axle
Brake Disc Hub Height [mm]: 9,5 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$22.46
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Brake Disc
Art-Nr: A70-80030
Centering Diameter [mm]: 62 mm
Minimum thickness [mm]: 25 mm
Brake Disc Thickness [mm]: 28 mm
Brake Disc Type: Vented
Height [mm]: 49.2 mm
Bolt Hole Circle Ø [mm]: 114.3 mm
Rim Hole Number: 5 -Hole
Outer diameter [mm]: 296 mm
Brake Disc Hub Height [mm]: 21,2 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$34.73
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
