$22.77
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
$22.77
Have questions about this item?
You can pay for your order using any of these types of cards: Visa, MasterCard; as well as through these payment systems: PayPal and Bank transfer. All orders need to be prepaid to start processing. The parts are not reserved until the payment is received.
We provide worldwide shipping, but some parts cannot be processed in an automatic way. In all those cases the manager will contact you and will offer special delivery.

Link/Coupling Rod, stabiliser bar

Art-Nr: A63-9507

ACKOJAP
Supplier: ACKOJAP
Link/Coupling Rod, stabiliser bar ACKOJAP A63-9507
Link/Coupling Rod, stabiliser bar ACKOJAP A63-9507 main

Product info

Rod/Strut:
Coupling Rod
Fitting Position:
Rear Axle
Additional Info:
In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
EAN:
4062375228089
Category:
Stabilizer-/Accessories
 
Stabiliser And Parts
Condition:
new
Item Number:
A639507
Brand
Code
555
SL-6685
A.B.S.
260846
ACKOJAP
A63-9507
ASHUKI by Palidium
S894-07
ASVA
0823-S12R
AYD
9616142
BGA
LS0352
BLUE PRINT
ADS78508
BORG & BECK
BDL7503
COMLINE
CSL7234
DELPHI
TC5520
FAI AutoParts
SS9388
FEBEST
0823-B14R
FEBI BILSTEIN
42796
FIRST LINE
FDL7503
FORMPART
3508011
GSP
S050924
HERTH+BUSS JAKOPARTS
J4897006
KAMOKA
9030350
KAVO PARTS
SLS-8005
KAWE
8500 68608
LYNXauto
C7438LR
MAGNETI MARELLI
600000151550
MONROE
L68608
MOOG
SU-LS-13523
NIPPARTS
N4897002
NPS
S405U06
OCAP
0505578
SIDEM
83065
STELLOX
56-02154-SX
SUBARU
20470-AJ010
SUBARU
20470-SC000
SWAG
86 94 2796
TALOSA
50-09120
TEDGUM
00647470
TRISCAN
8500 68608
WILMINK GROUP
WG2038599
ZEKKERT
SS-1254
Brand Model Engine code Fuel Displacement HP KW Year
SUBARUFORESTER (SH)EE20ZDiesel2.0147hp108kw2008-2013
SUBARUFORESTER (SH)EJ204Petrol/Liquified Petroleum Gas (LPG)2.0150hp110kw2009-2011
SUBARUFORESTER (SH)EJ204Petrol2.0150hp110kw2008-2013
SUBARUFORESTER (SH)EJ253Petrol2.5171hp126kw2008-now
SUBARUFORESTER (SH)EJ255Petrol2.5230hp169kw2008-2013
SUBARUFORESTER (SH)EJ25Petrol2.5171hp126kw2009-2013
SUBARUFORESTER (SH)FB20Petrol2.0150hp110kw2010-now
SUBARUFORESTER (SH)FB25Petrol2.5171hp126kw2011-2013
SUBARUFORESTER (SH_)EE20ZDiesel2.0147hp108kw2008-2013
SUBARUFORESTER (SH_)EJ204Petrol/Liquified Petroleum Gas (LPG)2.0150hp110kw2009-2011
SUBARUFORESTER (SH_)EJ204Petrol2.0150hp110kw2008-2013
SUBARUFORESTER (SH_)EJ253Petrol2.5171hp126kw2008-now
SUBARUFORESTER (SH_)EJ255Petrol2.5230hp169kw2008-2013
SUBARUFORESTER (SH_)EJ25Petrol2.5171hp126kw2009-2013
SUBARUFORESTER (SH_)FB20Petrol2.0150hp110kw2010-now
SUBARUFORESTER (SH_)FB25Petrol2.5171hp126kw2011-2013
SUBARUFORESTER (SJ_)EE20ZDiesel2.0147hp108kw2013-now
SUBARUFORESTER (SJ_)FA20Petrol2.0241hp177kw2013-now
SUBARUFORESTER (SJ_)FB20Petrol2.0150hp110kw2013-now
SUBARUFORESTER (SJ_)FB20BPetrol/Liquified Petroleum Gas (LPG)2.0150hp110kw2013-now
SUBARUFORESTER (SJ_)FB25Petrol2.5171hp126kw2012-now
SUBARUOUTBACK (BM, BR)EE20ZDiesel2.0147hp108kw2013-now
SUBARUOUTBACK (BM, BR)EE20ZDiesel2.0150hp110kw2009-now
SUBARUOUTBACK (BM, BR)EJ253Petrol/Liquified Petroleum Gas (LPG)2.5167hp123kw2010-2014
SUBARUOUTBACK (BM, BR)EJ253Petrol2.5167hp123kw2009-now
SUBARUOUTBACK (BM, BR)EJ25Petrol2.5170hp125kw2012-now
SUBARUOUTBACK (BM, BR)EZ36DPetrol3.6249hp183kw2011-2014
SUBARUOUTBACK (BM, BR)EZ36DPetrol3.6260hp191kw2009-now
SUBARUOUTBACK (BM, BR)FB25Petrol2.5170hp125kw2013-now
SUBARUOUTBACK (BM, BR)FB25Petrol2.5177hp130kw2014-now
SUBARUOUTBACK (BM, BR)FB25BPetrol/Compressed Natural Gas (CNG)2.5173hp127kw2014-2014
SUBARUOUTBACK (BM, BR)FB25BPetrol/Liquified Petroleum Gas (LPG)2.5173hp127kw2013-2014
SUBARUOUTBACK (BM, BR)FB25BPetrol2.5173hp127kw2013-now
SUBARUOUTBACK (BR)EE20ZDiesel2.0147hp108kw2013-now
SUBARUOUTBACK (BR)EE20ZDiesel2.0150hp110kw2009-now
SUBARUOUTBACK (BR)EJ253Petrol/Liquified Petroleum Gas (LPG)2.5167hp123kw2010-2014
SUBARUOUTBACK (BR)EJ253Petrol2.5167hp123kw2009-now
SUBARUOUTBACK (BR)EJ25Petrol2.5170hp125kw2012-now
SUBARUOUTBACK (BR)EZ36DPetrol3.6249hp183kw2011-2014
SUBARUOUTBACK (BR)EZ36DPetrol3.6260hp191kw2009-now
SUBARUOUTBACK (BR)FB25Petrol2.5170hp125kw2013-now
SUBARUOUTBACK (BR)FB25Petrol2.5177hp130kw2014-now
SUBARUOUTBACK (BR)FB25BPetrol/Compressed Natural Gas (CNG)2.5173hp127kw2014-2014
SUBARUOUTBACK (BR)FB25BPetrol/Liquified Petroleum Gas (LPG)2.5173hp127kw2013-2014
SUBARUOUTBACK (BR)FB25BPetrol2.5173hp127kw2013-now
SUBARUXV (GT)FB16APetrol1.6114hp84kw2017-now
SUBARUXV (GT)FB20CPetrol2.0150hp110kw2019-now
SUBARUXV (GT)FB20CPetrol2.0156hp115kw2017-now
SUBARUXV (GT)FB20DPetrol2.0156hp115kw2017-now
SUBARUXV (GT)FB20WPetrol/Electric2.0150hp110kw2019-now
SUBARUXV (GT)FB20XPetrol/Electric2.0150hp110kw2019-now
SUBARUXV (_GP_)EE20ZDiesel2.0109hp80kw2012-now
SUBARUXV (_GP_)EE20ZDiesel2.0147hp108kw2012-now
SUBARUXV (_GP_)FB16APetrol1.6114hp84kw2012-now
SUBARUXV (_GP_)FB16BPetrol/Liquified Petroleum Gas (LPG)1.6114hp84kw2012-now
SUBARUXV (_GP_)FB16BPetrol1.6114hp84kw2012-now
SUBARUXV (_GP_)FB20Petrol/Electric2.0150hp110kw2014-now
SUBARUXV (_GP_)FB20BPetrol/Liquified Petroleum Gas (LPG)2.0150hp110kw2012-now
SUBARUXV (_GP_)FB20BPetrol2.0150hp110kw2012-now

SIMILAR PRODUCTS FOR YOUR VEHICLE

Link/Coupling Rod, stabiliser bar SWAG 86942796 SWAG Link/Coupling Rod, stabiliser bar SWAG Art-Nr: 86942796 Rod/Strut: Coupling Rod Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Supplementary Article/Info 2: with screw Supplementary Article/Info 2: with nut Fitting Position: Rear Axle Right Fitting Position: Rear Axle Left
$25.96
no VAT req.
Available: 4 Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Link/Coupling Rod, stabiliser bar FEBI BILSTEIN 42796 FEBI BILSTEIN Link/Coupling Rod, stabiliser bar FEBI BILSTEIN Art-Nr: 42796 Rod/Strut: Coupling Rod Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Supplementary Article/Info 2: with screw Supplementary Article/Info 2: with nut Fitting Position: Rear Axle Right Fitting Position: Rear Axle Left
$27.68
no VAT req.
Available: 4 Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Link/Coupling Rod, stabiliser bar BLUE PRINT ADS78508 BLUE PRINT Link/Coupling Rod, stabiliser bar BLUE PRINT Art-Nr: ADS78508 Weight [kg]: 0,540 kg Rod/Strut: Coupling Rod Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Supplementary Article/Info 2: with nut Supplementary Article/Info 2: with screw Fitting Position: Rear Axle Right Fitting Position: Rear Axle Left
$23.09
no VAT req.
Available: 4 Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Rod/Strut, stabiliser TRISCAN 850068608 TRISCAN Rod/Strut, stabiliser TRISCAN Art-Nr: 850068608 Rod/Strut: Coupling Rod Thread Size: M10x1,25 Required quantity: 2 Length [mm]: 106.5 mm
$12.73
no VAT req.
Available: 10+ Special Order Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Handling time: About 30 business day(s) Handling Time: About 30 business day(s)
?
The item should be shipped within 30 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
no image KAMOKA Rod/Strut, stabiliser KAMOKA Art-Nr: 9030350 Thread Size 1: MM10x1.25R Rod/Strut: Coupling Rod Length 1 [mm]: 107 mm Fitting Position: Rear Axle left and right
$6.88
no VAT req.
Available: 2 Handling time: About 2 business day(s) Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Sway Bar, suspension JAPKO 106705 JAPKO Sway Bar, suspension JAPKO Art-Nr: 106705 Fitting Position: Rear Axle Width [mm]: 55 mm Length [mm]: 143 mm Overall Height [mm]: 58 mm Inner diameter [mm]: 10 mm Outer thread [mm]: M10X1,25 mm
$7.68
no VAT req.
Available: 3 Handling time: About 2 business day(s) Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
no image JAPANPARTS Sway Bar, suspension JAPANPARTS Art-Nr: SI705 Width [mm]: 55 mm Overall Height [mm]: 58 mm Outer thread [mm]: M10X1,25 mm Length [mm]: 143 mm Inner diameter [mm]: 10 mm Fitting Position: Rear Axle
$8.21
no VAT req.
Available: 4 Handling time: About 2 business day(s) Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro

ACKOJAP Stabiliser and parts

Mounting, stabiliser bar ACKOJAP A37-0139 ACKOJAP Mounting, stabiliser bar ACKOJAP Art-Nr: A37-0139 Required quantity: 2 Mounting Type: Rubber Bush Inner diameter [mm]: 23 mm Fitting Position: Front Axle both sides Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$3.53
no VAT req.
Available: 10 Available: 10 Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Link/Coupling Rod, stabiliser bar ACKOJAP A37-1150 ACKOJAP Link/Coupling Rod, stabiliser bar ACKOJAP Art-Nr: A37-1150 Rod/Strut: Coupling Rod Fitting Position: Front Axle Weight [kg]: 0.286 kg Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$9.92
no VAT req.
Available: 10+ Available: 10+ Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Mounting, stabiliser bar ACKOJAP A38-0238 ACKOJAP Mounting, stabiliser bar ACKOJAP Art-Nr: A38-0238 Inner diameter [mm]: 26 mm Required quantity: 2 Length [mm]: 50.8 mm Mounting Type: Rubber Bush Fitting Position: Front Axle both sides Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$4.78
no VAT req.
Available: 2 Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Mounting, stabiliser bar ACKOJAP A63-0023 ACKOJAP Mounting, stabiliser bar ACKOJAP Art-Nr: A63-0023 Inner diameter [mm]: 20 mm Required quantity: 2 Mounting Type: Rubber Bush Fitting Position: Front Axle both sides Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$4.29
no VAT req.
Available: 10+ Available: 10+ Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Mounting, stabiliser bar ACKOJAP A63-0024 ACKOJAP Mounting, stabiliser bar ACKOJAP Art-Nr: A63-0024 Required quantity: 2 Inner diameter [mm]: 15 mm Mounting Type: Rubber Bush Fitting Position: Rear Axle both sides Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$4.56
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Link/Coupling Rod, stabiliser bar ACKOJAP A63-0063 ACKOJAP Link/Coupling Rod, stabiliser bar ACKOJAP Art-Nr: A63-0063 Weight [kg]: 0.596 kg Length [mm]: 342 mm Rod/Strut: Suspension Rod Fitting Position: Rear Axle Right paired article number: A63-0064 Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$15.37
no VAT req.
Available: 10+ Available: 10+ Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Link/Coupling Rod, stabiliser bar ACKOJAP A70-0001 ACKOJAP Link/Coupling Rod, stabiliser bar ACKOJAP Art-Nr: A70-0001 Rod/Strut: Suspension Rod Fitting Position: Front Axle Right paired article number: A70-0002 Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$18.76
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Link/Coupling Rod, stabiliser bar ACKOJAP A70-0002 ACKOJAP Link/Coupling Rod, stabiliser bar ACKOJAP Art-Nr: A70-0002 Rod/Strut: Coupling Rod Fitting Position: Front Axle Left paired article number: A70-0001 Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$7.02
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Link/Coupling Rod, stabiliser bar ACKOJAP A70-0019 ACKOJAP Link/Coupling Rod, stabiliser bar ACKOJAP Art-Nr: A70-0019 Rod/Strut: Coupling Rod Outer diameter [mm]: 8.5 mm Spanner Size: 13 [mm] Spanner Size: 10 [mm] Length [mm]: 97.5 mm Thread Length [mm]: 13 mm Fitting Position: Front Axle External Thread [mm]: M 8 x 1,25 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$4.46
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Link/Coupling Rod, stabiliser bar ACKOJAP A70-0515 ACKOJAP Link/Coupling Rod, stabiliser bar ACKOJAP Art-Nr: A70-0515 Thread Size 2: M10x1,25 Thread Size 1: M10x1,25 Weight [kg]: 0.615 kg Length [mm]: 260 mm Rod/Strut: Suspension Rod Fitting Position: Rear Axle Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$26.71
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro