$8.58
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
$8.58
Have questions about this item?
You can pay for your order using any of these types of cards: Visa, MasterCard; as well as through these payment systems: PayPal and Bank transfer. All orders need to be prepaid to start processing. The parts are not reserved until the payment is received.
We provide worldwide shipping, but some parts cannot be processed in an automatic way. In all those cases the manager will contact you and will offer special delivery.

Link/Coupling Rod, stabiliser bar

Art-Nr: A53-9607

ACKOJAP
Supplier: ACKOJAP
Link/Coupling Rod, stabiliser bar ACKOJAP A53-9607
Link/Coupling Rod, stabiliser bar ACKOJAP A53-9607 main

Product info

Rod/Strut:
Coupling Rod
Fitting Position:
Front Axle
Additional Info:
In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
EAN:
4062375228379
Category:
Stabilizer-/Accessories
 
Stabiliser And Parts
Condition:
new
Item Number:
A539607
Brand
Code
4u
KI-F-35755
555
SLK-8530
A.B.S.
260447
ACKOJAP
A53-9607
AISIN
JRSKI-009
AKRON-MALÒ
52406
AYD
9604968
BGA
LS3621
BIRTH
BX5048
BLUE PRINT
ADG08513
BORG & BECK
BDL6795
BSG
BSG 40-310-074
COMLINE
CSL7256
DELPHI
TC2118
FAG
818 0134 10
FAI AutoParts
SS2286
FEBEST
0123-130F
FEBI BILSTEIN
41633
FEBI BILSTEIN
31093
FIRST LINE
FDL6795
FLENNOR
FL0943-H
FORMPART
4908009
G.U.D.
GSP301174
GSP
S050242
HERTH+BUSS JAKOPARTS
J4960311
KAMOKA
9030324
KAVO PARTS
SLS-4016
KAWE
8500 18621
KIA
54810-3E000
KIA
548103E000AS
KIA
548103E000-DS
LEMFÖRDER
33364 01
LYNXauto
C7206LR
MAGNETI MARELLI
600000159260
MAPCO
51532
MEYLE
28-16 060 0013
MGA
SA5245
MONROE
L18621
MOOG
MD-LS-3942
MOTAQUIP
VSL881
NIPPARTS
J4960311
NK
5113504
OCAP
0502475
OPTIMAL
G7-1054
ORIGINAL IMPERIUM
72249
Omnicraft
2394996
PATRON
PS4228
QUINTON HAZELL
QLS3405S
RTS
97-08815
SASIC
2306282
SIDEM
81063
SKF
VKDS 845044
STELLOX
56-53019-SX
SWAG
91 93 1093
SWAG
91 93 1094
SWAG
91 94 1633
SpeedMate
SM-SLK015
TALOSA
50-01413
TEDGUM
00349493
TOPRAN
820 556
TRISCAN
8500 18621
TRW
JTS7601
VEMA
23378
WILMINK GROUP
WG2039221
YAMATO
J60323YMT
ZEKKERT
SS-1383
Brand Model Engine code Fuel Displacement HP KW Year
KIASORENTO I (JC)D4CBDiesel2.5140hp103kw2002-2011
Important notes:Fitting Position: Front Axle Left;Fitting Position: Front Axle Right;Specification: TYPE 1
KIASORENTO I (JC)D4CBDiesel2.5163hp120kw2006-2011
Important notes:Fitting Position: Front Axle Left;Fitting Position: Front Axle Right;Specification: TYPE 1
KIASORENTO I (JC)D4CBDiesel2.5170hp125kw2006-2011
Important notes:Fitting Position: Front Axle Left;Fitting Position: Front Axle Right;Specification: TYPE 1
KIASORENTO I (JC)G4JSPetrol2.4139hp102kw2002-2009
Important notes:Fitting Position: Front Axle Left;Fitting Position: Front Axle Right;Specification: TYPE 1
KIASORENTO I (JC)G6CUPetrol3.5194hp143kw2002-2011
Important notes:Fitting Position: Front Axle Left;Fitting Position: Front Axle Right;Specification: TYPE 1
KIASORENTO I (JC)G6DBPetrol3.3248hp182kw2007-2011
Important notes:Fitting Position: Front Axle Left;Fitting Position: Front Axle Right;Specification: TYPE 1

SIMILAR PRODUCTS FOR YOUR VEHICLE

Link/Coupling Rod, stabiliser bar SWAG 91931093 SWAG Link/Coupling Rod, stabiliser bar SWAG Art-Nr: 91931093 Surface: Painted Rod/Strut: Coupling Rod Material: Steel Colour: Black Spanner Size: 13 Spanner Size: 16 Length [mm]: 149 mm Weight [kg]: 0.27 kg Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Supplementary Article/Info 2: with washers Supplementary Article/Info 2: with bearing(s) Supplementary Article/Info 2: with nut Fitting Position: Front Axle Right Fitting Position: Front Axle Left External Thread Size: M10 x 1,25 External Thread Size: M12 x 1,25
$9.88
no VAT req.
Available: 4 Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Link/Coupling Rod, stabiliser bar SWAG 91941633 SWAG Link/Coupling Rod, stabiliser bar SWAG Art-Nr: 91941633 Rod/Strut: Coupling Rod Material: Steel Spanner Size: 17 Spanner Size: 19 Length [mm]: 154 mm Weight [kg]: 0.28 kg Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Supplementary Article/Info 2: with bearing(s) Supplementary Article/Info 2: with washers Supplementary Article/Info 2: with nut Fitting Position: Front Axle Right Fitting Position: Front Axle Left External Thread Size: M10 x 1,25 External Thread Size: M12 x 1,25
$9.40
no VAT req.
Available: 4 Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Link/Coupling Rod, stabiliser bar FEBI BILSTEIN 31093 FEBI BILSTEIN Link/Coupling Rod, stabiliser bar FEBI BILSTEIN Art-Nr: 31093 Length [mm]: 149 mm Spanner Size: 16 Spanner Size: 13 Colour: Black Material: Steel Rod/Strut: Coupling Rod Surface: Painted Weight [kg]: 0.27 kg Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. for OE number: 54810-3E000 S1 Supplementary Article/Info 2: with nut Supplementary Article/Info 2: with washers Supplementary Article/Info 2: with bearing(s) Fitting Position: Front Axle Right Fitting Position: Front Axle Left External Thread Size: M10 x 1,25 External Thread Size: M12 x 1,25
$10.50
no VAT req.
Available: 4 Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Link/Coupling Rod, stabiliser bar FEBI BILSTEIN 41633 FEBI BILSTEIN Link/Coupling Rod, stabiliser bar FEBI BILSTEIN Art-Nr: 41633 Length [mm]: 154 mm Spanner Size: 19 Spanner Size: 17 Material: Steel Rod/Strut: Coupling Rod Weight [kg]: 0.28 kg Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. for OE number: 54810-3E000 Supplementary Article/Info 2: with bearing(s) Supplementary Article/Info 2: with nut Supplementary Article/Info 2: with washers Fitting Position: Front Axle Right Fitting Position: Front Axle Left External Thread Size: M10 x 1,25 External Thread Size: M12 x 1,25
$9.99
no VAT req.
Available: 4 Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Link/Coupling Rod, stabiliser bar DELPHI TC2118 DELPHI Link/Coupling Rod, stabiliser bar DELPHI Art-Nr: TC2118 Rod/Strut: Coupling Rod Thread Size: M12x1.25 Height [mm]: 60 mm Width [mm]: 37 mm
$9.04
no VAT req.
Available: 5 Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Link/Coupling Rod, stabiliser bar BLUE PRINT ADG08513 BLUE PRINT Link/Coupling Rod, stabiliser bar BLUE PRINT Art-Nr: ADG08513 Weight [kg]: 0,290 kg Rod/Strut: Coupling Rod Material: Steel Spanner Size: 17 Spanner Size: 19 Length [mm]: 169 mm Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Supplementary Article/Info 2: with washers Supplementary Article/Info 2: with nut Supplementary Article/Info 2: with bearing(s) Fitting Position: Front Axle Right Fitting Position: Front Axle Left External Thread Size: M10 x 1,25 External Thread Size: M12 x 1,25
$9.39
no VAT req.
Available: 4 Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
no image MAGNETI MARELLI Repair Kit, stabiliser bush MAGNETI MARELLI Art-Nr: 301191622740 Fitting Position: Front Axle
$7.46
no VAT req.
Available: 4 Special Order Handling time: About 10 business day(s) Handling Time: About 10 business day(s)
?
The item should be shipped within 10 business day(s) of receiving cleared payment.
Handling time: About 30 business day(s) Handling Time: About 30 business day(s)
?
The item should be shipped within 30 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Rod/Strut, stabiliser TRW JTS7601 TRW Rod/Strut, stabiliser TRW Art-Nr: JTS7601 Thread Size: M12x1.25 Supplementary Article/Supplementary Info: with accessories Rod/Strut: Coupling Rod Pipe Ø [mm]: 10 mm Length [mm]: 154 mm
$9.79
no VAT req.
Available: 4 Handling time: About 2 business day(s) Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Sway Bar, suspension JAPKO 106K21 JAPKO Sway Bar, suspension JAPKO Art-Nr: 106K21 Outer thread [mm]: 12X1,25 mm Overall Height [mm]: 61.5 mm Overall Length [mm]: 170 mm Fitting Position: Front Axle
$7.23
no VAT req.
Available: 2 Handling time: About 2 business day(s) Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Rod/Strut, stabiliser FEBEST 0123130F FEBEST Rod/Strut, stabiliser FEBEST Art-Nr: 0123130F Weight [kg]: 0,275 kg Rod/Strut: Suspension Rod Quantity: 7 Packaging width [cm]: 6,0 cm Packaging length [cm]: 17,0 cm Packaging height [cm]: 4,0 cm Fitting Position: Front Axle left and right
$5.71
no VAT req.
Available: 1 Handling time: About 2 business day(s) Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro

ACKOJAP Stabiliser and parts

Mounting, stabiliser bar ACKOJAP A37-0139 ACKOJAP Mounting, stabiliser bar ACKOJAP Art-Nr: A37-0139 Required quantity: 2 Mounting Type: Rubber Bush Inner diameter [mm]: 23 mm Fitting Position: Front Axle both sides Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$3.50
no VAT req.
Available: 10 Available: 10 Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Link/Coupling Rod, stabiliser bar ACKOJAP A37-1150 ACKOJAP Link/Coupling Rod, stabiliser bar ACKOJAP Art-Nr: A37-1150 Rod/Strut: Coupling Rod Fitting Position: Front Axle Weight [kg]: 0.286 kg Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$9.84
no VAT req.
Available: 10+ Available: 10+ Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Mounting, stabiliser bar ACKOJAP A38-0238 ACKOJAP Mounting, stabiliser bar ACKOJAP Art-Nr: A38-0238 Inner diameter [mm]: 26 mm Required quantity: 2 Length [mm]: 50.8 mm Mounting Type: Rubber Bush Fitting Position: Front Axle both sides Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$4.74
no VAT req.
Available: 2 Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Mounting, stabiliser bar ACKOJAP A63-0023 ACKOJAP Mounting, stabiliser bar ACKOJAP Art-Nr: A63-0023 Inner diameter [mm]: 20 mm Required quantity: 2 Mounting Type: Rubber Bush Fitting Position: Front Axle both sides Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$4.26
no VAT req.
Available: 10+ Available: 10+ Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Mounting, stabiliser bar ACKOJAP A63-0024 ACKOJAP Mounting, stabiliser bar ACKOJAP Art-Nr: A63-0024 Required quantity: 2 Inner diameter [mm]: 15 mm Mounting Type: Rubber Bush Fitting Position: Rear Axle both sides Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$4.52
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Link/Coupling Rod, stabiliser bar ACKOJAP A63-0063 ACKOJAP Link/Coupling Rod, stabiliser bar ACKOJAP Art-Nr: A63-0063 Weight [kg]: 0.596 kg Length [mm]: 342 mm Rod/Strut: Suspension Rod Fitting Position: Rear Axle Right paired article number: A63-0064 Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$15.24
no VAT req.
Available: 10+ Available: 10+ Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Link/Coupling Rod, stabiliser bar ACKOJAP A70-0001 ACKOJAP Link/Coupling Rod, stabiliser bar ACKOJAP Art-Nr: A70-0001 Rod/Strut: Suspension Rod Fitting Position: Front Axle Right paired article number: A70-0002 Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$18.59
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Link/Coupling Rod, stabiliser bar ACKOJAP A70-0002 ACKOJAP Link/Coupling Rod, stabiliser bar ACKOJAP Art-Nr: A70-0002 Rod/Strut: Coupling Rod Fitting Position: Front Axle Left paired article number: A70-0001 Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$6.96
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Link/Coupling Rod, stabiliser bar ACKOJAP A70-0019 ACKOJAP Link/Coupling Rod, stabiliser bar ACKOJAP Art-Nr: A70-0019 Rod/Strut: Coupling Rod Outer diameter [mm]: 8.5 mm Spanner Size: 13 [mm] Spanner Size: 10 [mm] Length [mm]: 97.5 mm Thread Length [mm]: 13 mm Fitting Position: Front Axle External Thread [mm]: M 8 x 1,25 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$4.42
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Link/Coupling Rod, stabiliser bar ACKOJAP A70-0515 ACKOJAP Link/Coupling Rod, stabiliser bar ACKOJAP Art-Nr: A70-0515 Thread Size 2: M10x1,25 Thread Size 1: M10x1,25 Weight [kg]: 0.615 kg Length [mm]: 260 mm Rod/Strut: Suspension Rod Fitting Position: Rear Axle Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$26.48
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro