$17.50
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
$17.50
Have questions about this item?
You can pay for your order using any of these types of cards: Visa, MasterCard; as well as through these payment systems: PayPal and Bank transfer. All orders need to be prepaid to start processing. The parts are not reserved until the payment is received.
We provide worldwide shipping, but some parts cannot be processed in an automatic way. In all those cases the manager will contact you and will offer special delivery.

Link/Coupling Rod, stabiliser bar

Art-Nr: A53-1176

ACKOJAP
Supplier: ACKOJAP

Product info

Rod/Strut:
Coupling Rod
Fitting Position:
Rear Axle
Additional Info:
In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
EAN:
4062375204083
Category:
Stabilizer-/Accessories
 
Stabiliser And Parts
Condition:
new
Item Number:
A531176
Brand
Code
A.B.S.
261141
ACKOJAP
A53-1176
CORTECO
49485809
DELPHI
TC6793
DYS
30-91802
FEBI BILSTEIN
181205
HERTH+BUSS JAKOPARTS
J4890536
HYUNDAI
55530-D3000
KAVO PARTS
SLS-3100
KIA
55530D3000
MEYLE
37-16 060 0060/HD
MOOG
KI-LS-16571
NIPPARTS
N4890533
QUINTON HAZELL
QLS3939S
SIDEM
87662
SPIDAN CHASSIS PARTS
59753
TALOSA
50-11265
TRISCAN
8500 43665
VEMA
250024
Brand Model Engine code Fuel Displacement HP KW Year
HYUNDAINEXOFM12HydrogenNone163hp120kw2018-now
HYUNDAITUCSON (TL)D4FDDiesel1.7116hp85kw2015-2020
HYUNDAITUCSON (TL)D4FDDiesel1.7141hp104kw2015-2020
HYUNDAITUCSON (TL)D4FEDiesel/Electro1.6116hp85kw2019-now
HYUNDAITUCSON (TL)D4FEDiesel/Electro1.6136hp100kw2019-now
HYUNDAITUCSON (TL)D4FEDiesel1.6116hp85kw2018-2020
HYUNDAITUCSON (TL)D4FEDiesel1.6136hp100kw2018-now
HYUNDAITUCSON (TL)D4HADiesel/Electro2.0185hp136kw2018-now
HYUNDAITUCSON (TL)D4HADiesel2.0136hp100kw2015-2020
HYUNDAITUCSON (TL)D4HADiesel2.0178hp131kw2015-2020
HYUNDAITUCSON (TL)D4HADiesel2.0185hp136kw2015-2020
HYUNDAITUCSON (TL)G4FDPetrol1.6130hp96kw2015-2020
HYUNDAITUCSON (TL)G4FDPetrol1.6132hp97kw2015-2020
HYUNDAITUCSON (TL)G4FJPetrol1.6177hp130kw2015-2020
HYUNDAITUCSON (TL)G4KJPetrol2.4184hp135kw2019-2020
HYUNDAITUCSON (TL)G4NAPetrol2.0150hp110kw2015-2020
HYUNDAITUCSON (TL)G4NAPetrol2.0155hp114kw2015-2020
HYUNDAITUCSON (TL)G4NAPetrol2.0156hp115kw2015-2020
HYUNDAITUCSON (TL)G4NCPetrol2.0165hp121kw2015-2020
HYUNDAITUCSON (TL, TLE)D4FDDiesel1.7116hp85kw2015-2020
HYUNDAITUCSON (TL, TLE)D4FDDiesel1.7141hp104kw2015-2020
HYUNDAITUCSON (TL, TLE)D4FEDiesel/Electro1.6116hp85kw2019-now
HYUNDAITUCSON (TL, TLE)D4FEDiesel/Electro1.6136hp100kw2019-now
HYUNDAITUCSON (TL, TLE)D4FEDiesel1.6116hp85kw2018-2020
HYUNDAITUCSON (TL, TLE)D4FEDiesel1.6136hp100kw2018-now
HYUNDAITUCSON (TL, TLE)D4HADiesel/Electro2.0185hp136kw2018-now
HYUNDAITUCSON (TL, TLE)D4HADiesel2.0136hp100kw2015-2020
HYUNDAITUCSON (TL, TLE)D4HADiesel2.0178hp131kw2015-2020
HYUNDAITUCSON (TL, TLE)D4HADiesel2.0185hp136kw2015-2020
HYUNDAITUCSON (TL, TLE)G4FDPetrol1.6130hp96kw2015-2020
HYUNDAITUCSON (TL, TLE)G4FDPetrol1.6132hp97kw2015-2020
HYUNDAITUCSON (TL, TLE)G4FJPetrol1.6177hp130kw2015-2020
HYUNDAITUCSON (TL, TLE)G4KJPetrol2.4184hp135kw2019-2020
HYUNDAITUCSON (TL, TLE)G4NAPetrol2.0150hp110kw2015-2020
HYUNDAITUCSON (TL, TLE)G4NAPetrol2.0155hp114kw2015-2020
HYUNDAITUCSON (TL, TLE)G4NAPetrol2.0156hp115kw2015-2020
HYUNDAITUCSON (TL, TLE)G4NCPetrol2.0165hp121kw2015-2020
HYUNDAITUCSON (TLE)D4FDDiesel1.7116hp85kw2015-2020
HYUNDAITUCSON (TLE)D4FDDiesel1.7141hp104kw2015-2020
HYUNDAITUCSON (TLE)D4FEDiesel/Electro1.6116hp85kw2019-now
HYUNDAITUCSON (TLE)D4FEDiesel/Electro1.6136hp100kw2019-now
HYUNDAITUCSON (TLE)D4FEDiesel1.6116hp85kw2018-2020
HYUNDAITUCSON (TLE)D4FEDiesel1.6136hp100kw2018-now
HYUNDAITUCSON (TLE)D4HADiesel/Electro2.0185hp136kw2018-now
HYUNDAITUCSON (TLE)D4HADiesel2.0136hp100kw2015-2020
HYUNDAITUCSON (TLE)D4HADiesel2.0178hp131kw2015-2020
HYUNDAITUCSON (TLE)D4HADiesel2.0185hp136kw2015-2020
HYUNDAITUCSON (TLE)G4FDPetrol1.6130hp96kw2015-2020
HYUNDAITUCSON (TLE)G4FDPetrol1.6132hp97kw2015-2020
HYUNDAITUCSON (TLE)G4FJPetrol1.6177hp130kw2015-2020
HYUNDAITUCSON (TLE)G4KJPetrol2.4184hp135kw2019-2020
HYUNDAITUCSON (TLE)G4NAPetrol2.0150hp110kw2015-2020
HYUNDAITUCSON (TLE)G4NAPetrol2.0155hp114kw2015-2020
HYUNDAITUCSON (TLE)G4NAPetrol2.0156hp115kw2015-2020
HYUNDAITUCSON (TLE)G4NCPetrol2.0165hp121kw2015-2020
KIASPORTAGE (QL, QLE)D4FDDiesel1.7116hp85kw2015-now
KIASPORTAGE (QL, QLE)D4FDDiesel1.7141hp104kw2016-now
KIASPORTAGE (QL, QLE)D4FEDiesel/Electro1.6116hp85kw2019-now
KIASPORTAGE (QL, QLE)D4FEDiesel/Electro1.6136hp100kw2019-now
KIASPORTAGE (QL, QLE)D4FEDiesel1.6116hp85kw2018-now
KIASPORTAGE (QL, QLE)D4FEDiesel1.6136hp100kw2018-now
KIASPORTAGE (QL, QLE)D4HADiesel/Electro2.0185hp136kw2018-now
KIASPORTAGE (QL, QLE)D4HADiesel2.0136hp100kw2015-now
KIASPORTAGE (QL, QLE)D4HADiesel2.0178hp131kw2015-now
KIASPORTAGE (QL, QLE)D4HADiesel2.0185hp136kw2015-now
KIASPORTAGE (QL, QLE)G4FDPetrol1.6132hp97kw2015-now
KIASPORTAGE (QL, QLE)G4FJPetrol1.6177hp130kw2015-now
KIASPORTAGE (QL, QLE)G4KJPetrol2.4184hp135kw2015-now
KIASPORTAGE (QL, QLE)G4NAPetrol2.0150hp110kw2015-now
KIASPORTAGE (QL, QLE)G4NAPetrol2.0155hp114kw2015-now
KIASPORTAGE (QL, QLE)G4NAPetrol2.0157hp115kw2015-now
KIASPORTAGE IV (QL, QLE)D4FDDiesel1.7116hp85kw2015-now
KIASPORTAGE IV (QL, QLE)D4FDDiesel1.7141hp104kw2016-now
KIASPORTAGE IV (QL, QLE)D4FEDiesel/Electro1.6116hp85kw2019-now
KIASPORTAGE IV (QL, QLE)D4FEDiesel/Electro1.6136hp100kw2019-now
KIASPORTAGE IV (QL, QLE)D4FEDiesel1.6116hp85kw2018-now
KIASPORTAGE IV (QL, QLE)D4FEDiesel1.6136hp100kw2018-now
KIASPORTAGE IV (QL, QLE)D4HADiesel/Electro2.0185hp136kw2018-now
KIASPORTAGE IV (QL, QLE)D4HADiesel2.0136hp100kw2015-now
KIASPORTAGE IV (QL, QLE)D4HADiesel2.0178hp131kw2015-now
KIASPORTAGE IV (QL, QLE)D4HADiesel2.0185hp136kw2015-now
KIASPORTAGE IV (QL, QLE)G4FDPetrol1.6132hp97kw2015-now
KIASPORTAGE IV (QL, QLE)G4FJPetrol1.6177hp130kw2015-now
KIASPORTAGE IV (QL, QLE)G4KJPetrol2.4184hp135kw2015-now
KIASPORTAGE IV (QL, QLE)G4NAPetrol2.0150hp110kw2015-now
KIASPORTAGE IV (QL, QLE)G4NAPetrol2.0155hp114kw2015-now
KIASPORTAGE IV (QL, QLE)G4NAPetrol2.0157hp115kw2015-now

SIMILAR PRODUCTS FOR YOUR VEHICLE

Rod/Strut, stabiliser TRISCAN 850043665 TRISCAN Rod/Strut, stabiliser TRISCAN Art-Nr: 850043665 Thread Size: M12x1,25/M12x1,25 Rod/Strut: Coupling Rod Required quantity: 2 Length [mm]: 111 mm
$15.48
no VAT req.
Special Order Handling time: About 30 business day(s) Handling Time: About 30 business day(s)
?
The item should be shipped within 30 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Link/Coupling Rod, stabiliser bar MEYLE 37-160600060/HD MEYLE Link/Coupling Rod, stabiliser bar MEYLE Art-Nr: 37-160600060/HD Thread Size 2: 12x1,25 Thread Size 1: 12x1,25 Rod/Strut: Coupling Rod Additional Info: Cold Climate - Check OE# DELPHI CVC165, HU6, for lowered chassis, 'Improved design for longer service life: MEYLE-HD parts, only for cars with plastic cover Ø 32 mm on top of the upper, Upgrade available! Antiallergenic version: FP 21 000-2, CHINA Engine, Use also 4 O-rings, Set HT019, Upgrade available! Antiallergenic version: FP 30 007, SMD 04 TDK CB - Side marker light, LED, ADR, amber, 24V,, combination solution comprising DCU 220, KTS 590, Trans.ZF HP 500/590, Mot.8220.02.834, Aerosus offers brand new air suspension compressors for the, 6 wires on sensor Click-in connector for flat cable, with 500mm cable, with, Land Rover Discovery 2, that replace the original, Type: Punto TD 70, attachment, deliver enhanced durability. Compared to OE, MEYLE-HD is compressor of your vehicle., reflector, with bent bracket, technically improved with reinforced inner parts, using, Type: Uno 60 Diesel, Type: Punto TD 70 higher quality materials or optimized design solution. Our powerful compressors are made by WABCO, the original equipment manufacturer of Land Rover compressors. Each one is covered by a 2-year warranty by Aerosus. Type: 318i (1987-1991) The new original WABCO compressor comes fully assembled and ready for installation. WABCO air suspension compressors are high-quality products for supplying air to the suspension system. As a key part of the air suspension, a good compressor is vital. WABCO compressors are known for their consistently powerful and reliable performance as well as their exceptional durability. All WABCO compressors are designed for use with 12V vehicle electrical systems and have maintenance-free, integrated air dryers. Our strong collaboration with WABCO means that we can offer the same compressor unit at a significantly lower price than Land Rover dealerships. After installation of the compressor, Aerosus recommends that you check the complete air suspension system for any leakage. The most common cause of compressor failure is a leak in the air suspension system, most likely in one of the air springs. Leaky air springs should be replaced immediately to maintain optimum compressor performance. Features Original WABCO compressor High performance Security and durability Powerful and reliable Maintenance-free Reduced noise and vibration Integrated air dryer Compact design Easy installation Thousands of satisfied customers worldwide Does not take vac pump FIAT (steering), excl. S-Line, Audi Electr. Damping Control, Allroad, HD susp, SMD 04 DK1 Super seal - Side marker light, LED, ADR, amber,, Aerosus shock absorbers replace the original shock absorber, 257mm solid disc, 4-year warranty on all MEYLE-HD parts., Relief 21.50mm, 130A,12X 35A Diode Avalanche, For testing of Common Rail high-pressure pumps of latest g, Webasto Aerosphere W, Ref.Webasto 1101892C, Qte 4,, Upgrade available! Antiallergenic version: FP 34 003, Upgrade available! Antiallergenic version: FP 2440, CUMMINS Engineered and quality approved in Germany., of your vehicle and offer you maximum ride comfort with, ension, S4, S4/RS4 Avant, eneration, 24V, with reflector, Superseal 2-pins connector, Transferbox/P.T.O. Type: Discovery 300 Tdi, high durability. Security, accuracy of fit and quality of the product match the original part. This brand new rear shock absorber fits both left and right side of Mercedes GL-Class (X164 chassis) vehicles Type: 325td (1991-1995), without ADS and Mercedes ML (W164 chassis) vehicles without ADS (Adaptive Damping System). Aerosus shock absorbers are made of high-quality materials and are covered by a 2-year limited warranty. Our shock absorbers provide high-performance and dynamics while ensuring perfect grip and maximum driving comfort in any situation. As well as improving vehicle stability, they optimise passenger comfort by reducing the magnitude of vibratory motions due to road imperfections, giving you a smooth ride. Our dampers are designed for superior ride quality by adjusting quickly to different road and vehicle conditions, while offering ultimate safety and functionality. Features High-quality shock absorber Security and durability Brand new part Maximum ride comfort Perfect road grip Improved vehicle stability Easy installation Protective dust cover Thousands of satisfied customers worldwide Length [mm]: 110 mm Fitting Position: Rear Axle Right Fitting Position: Rear Axle Left
$19.62
no VAT req.
Available: 10+ Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
no image DELPHI Link/Coupling Rod, stabiliser bar DELPHI Art-Nr: TC6793 Rod/Strut: Coupling Rod
$16.88
no VAT req.
Available: 5 Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
no image FEBI BILSTEIN Link/Coupling Rod, stabiliser bar FEBI BILSTEIN Art-Nr: 181205 Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Supplementary Article/Info 2: with nut Weight [kg]: 0,5 kg Fitting Position: Rear Axle Left Fitting Position: Rear Axle Right Diameter [mm]: 1 mm Rod/Strut: Coupling Rod Material: Steel Spanner Size: 18 Thread Length [mm]: 21 mm External Thread Size: M12 x 1,25 Length [mm]: 111 mm
$14.18
no VAT req.
Available: 4 Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro

ACKOJAP Stabiliser and parts

Mounting, stabiliser bar ACKOJAP A37-0139 ACKOJAP Mounting, stabiliser bar ACKOJAP Art-Nr: A37-0139 Required quantity: 2 Mounting Type: Rubber Bush Inner diameter [mm]: 23 mm Fitting Position: Front Axle both sides Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$3.51
no VAT req.
Available: 10 Available: 10 Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Link/Coupling Rod, stabiliser bar ACKOJAP A37-1150 ACKOJAP Link/Coupling Rod, stabiliser bar ACKOJAP Art-Nr: A37-1150 Rod/Strut: Coupling Rod Fitting Position: Front Axle Weight [kg]: 0.286 kg Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$9.88
no VAT req.
Available: 10+ Available: 10+ Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Mounting, stabiliser bar ACKOJAP A38-0238 ACKOJAP Mounting, stabiliser bar ACKOJAP Art-Nr: A38-0238 Inner diameter [mm]: 26 mm Required quantity: 2 Length [mm]: 50.8 mm Mounting Type: Rubber Bush Fitting Position: Front Axle both sides Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$4.76
no VAT req.
Available: 2 Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Mounting, stabiliser bar ACKOJAP A63-0023 ACKOJAP Mounting, stabiliser bar ACKOJAP Art-Nr: A63-0023 Inner diameter [mm]: 20 mm Required quantity: 2 Mounting Type: Rubber Bush Fitting Position: Front Axle both sides Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$4.27
no VAT req.
Available: 10+ Available: 10+ Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Mounting, stabiliser bar ACKOJAP A63-0024 ACKOJAP Mounting, stabiliser bar ACKOJAP Art-Nr: A63-0024 Required quantity: 2 Inner diameter [mm]: 15 mm Mounting Type: Rubber Bush Fitting Position: Rear Axle both sides Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$4.54
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Link/Coupling Rod, stabiliser bar ACKOJAP A63-0063 ACKOJAP Link/Coupling Rod, stabiliser bar ACKOJAP Art-Nr: A63-0063 Weight [kg]: 0.596 kg Length [mm]: 342 mm Rod/Strut: Suspension Rod Fitting Position: Rear Axle Right paired article number: A63-0064 Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$15.30
no VAT req.
Available: 10+ Available: 10+ Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Link/Coupling Rod, stabiliser bar ACKOJAP A70-0001 ACKOJAP Link/Coupling Rod, stabiliser bar ACKOJAP Art-Nr: A70-0001 Rod/Strut: Suspension Rod Fitting Position: Front Axle Right paired article number: A70-0002 Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$18.67
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Link/Coupling Rod, stabiliser bar ACKOJAP A70-0002 ACKOJAP Link/Coupling Rod, stabiliser bar ACKOJAP Art-Nr: A70-0002 Rod/Strut: Coupling Rod Fitting Position: Front Axle Left paired article number: A70-0001 Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$6.99
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Link/Coupling Rod, stabiliser bar ACKOJAP A70-0019 ACKOJAP Link/Coupling Rod, stabiliser bar ACKOJAP Art-Nr: A70-0019 Rod/Strut: Coupling Rod Outer diameter [mm]: 8.5 mm Spanner Size: 13 [mm] Spanner Size: 10 [mm] Length [mm]: 97.5 mm Thread Length [mm]: 13 mm Fitting Position: Front Axle External Thread [mm]: M 8 x 1,25 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$4.44
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Link/Coupling Rod, stabiliser bar ACKOJAP A70-0515 ACKOJAP Link/Coupling Rod, stabiliser bar ACKOJAP Art-Nr: A70-0515 Thread Size 2: M10x1,25 Thread Size 1: M10x1,25 Weight [kg]: 0.615 kg Length [mm]: 260 mm Rod/Strut: Suspension Rod Fitting Position: Rear Axle Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$26.59
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro