$11.77
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
$11.77
Have questions about this item?
You can pay for your order using any of these types of cards: Visa, MasterCard; as well as through these payment systems: PayPal and Bank transfer. All orders need to be prepaid to start processing. The parts are not reserved until the payment is received.
We provide worldwide shipping, but some parts cannot be processed in an automatic way. In all those cases the manager will contact you and will offer special delivery.

Tie Rod End

Art-Nr: A38-9641

ACKOJAP
Supplier: ACKOJAP
Tie Rod End ACKOJAP A38-9641
Tie Rod End ACKOJAP A38-9641 main

Product info

paired article number:
A38-9642
Fitting Position:
Right
Additional Info:
In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
EAN:
4062375228607
Category:
Steering Joints
 
Track Rod/ Joints
 
Ball Joint
 
Tie Rod Assembly/ Parts
Condition:
new
Item Number:
A389641
Brand
Code
555
SE-N581R
A.B.S.
231084
ACKOJAP
A38-9641
ASHIKA
111-01-1019R
ASHUKI by Palidium
N862-18
AYD
9114236
BGA
SR0357
BLUE PRINT
ADBP870017
BORG & BECK
BTR5919
COMLINE
CTR2111
FAI AutoParts
SS9505
FEBI BILSTEIN
109584
FIRST LINE
FTR5919
FORMPART
4102101
HERTH+BUSS JAKOPARTS
J4831122
JAPANPARTS
TI-1019R
JAPKO
1111019R
KAVO PARTS
STE-6656
KAWE
8500 14161
KYB
KTR1355
LYNXauto
C4413R
MEYLE
36-16 020 0104/HD
MONROE
L14161
MOOG
NI-ES-15202
MOTAQUIP
LVTR1873
NISSAN
D85204BA0B
NISSAN
D8520-4BA0A
NK
50322121
OPTIMAL
G1-2021
PATRON
PS1417R
QUINTON HAZELL
QR4071S
SASIC
7676114
SIDEM
41141
STELLOX
51-98145-SX
SWAG
33 10 7025
TALOSA
42-10073
TRISCAN
8500 14161
VEMA
27428
Brand Model Engine code Fuel Displacement HP KW Year
NISSANX-TRAIL III (T32_, T32R, T32RR)HR13DDTPetrol1.3160hp118kw2019-now
NISSANX-TRAIL III (T32_, T32R, T32RR)M9RDiesel2.0177hp130kw2016-now
NISSANX-TRAIL III (T32_, T32R, T32RR)MR16DDTPetrol1.6163hp120kw2015-now
NISSANX-TRAIL III (T32_, T32R, T32RR)MR20DDPetrol2.0144hp106kw2014-now
NISSANX-TRAIL III (T32_, T32R, T32RR)QR25DEPetrol2.5169hp124kw2014-now
NISSANX-TRAIL III (T32_, T32R, T32RR)QR25DEPetrol2.5169hp124kw2015-now
NISSANX-TRAIL III (T32_, T32R, T32RR)QR25DEPetrol2.5171hp126kw2013-now
NISSANX-TRAIL III (T32_, T32R, T32RR)R9MDiesel1.6130hp96kw2014-now
NISSANX-TRAIL III (T32_, T32R, T32RR)R9NDiesel1.7131hp96kw2019-now
NISSANX-TRAIL III (T32_, T32R, T32RR)R9NDiesel1.7150hp110kw2019-now
NISSANX-TRAIL III (T32_, T32R, T32RR)R9NDiesel1.7163hp120kw2019-now

SIMILAR PRODUCTS FOR YOUR VEHICLE

Tie Rod End TRISCAN 850014161 TRISCAN Tie Rod End TRISCAN Art-Nr: 850014161 Cone Size [mm]: 11.85 mm Length [mm]: 207 mm Required quantity: 1 Outer thread [mm]: 10x1,25 mm Inner thread [mm]: 14x1,5 mm Thread Type: with right-hand thread
$11.85
no VAT req.
Available: 6 Special Order Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Handling time: About 30 business day(s) Handling Time: About 30 business day(s)
?
The item should be shipped within 30 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Tie Rod End FEBI BILSTEIN 109584 FEBI BILSTEIN Tie Rod End FEBI BILSTEIN Art-Nr: 109584 Weight [kg]: 0.663 kg Fitting Position: Front Axle Right Length [mm]: 207 mm Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Supplementary Article/Info 2: with nut External Thread Size: M10 x 1,25 Internal Thread Size: M14 x 1,5 paired article number: 109583
$16.38
no VAT req.
Available: 4 Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
no image OPTIMAL Tie Rod OPTIMAL Art-Nr: G0-2017 Required quantity: 1 Length [mm]: 418 mm Cone Size 2 [mm]: 14,6 mm Cone Size 1 [mm]: 11,8 mm External Thread 2 [mm]: M16 x 1,5 RHT M mm External Thread 1 [mm]: M10 x 1,25 RHT M mm paired article number: G0-2016 Fitting Position: Front Axle Right
$18.10
no VAT req.
Available: 10+ Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
no image OPTIMAL Tie Rod End OPTIMAL Art-Nr: G1-2021 Required quantity: 1 Length [mm]: 207 mm Fitting Position: Outer Cone Size 2 [mm]: 14,6 mm Cone Size 1 [mm]: 11,8 mm paired article number: G1-2020 External Thread [mm]: M10 x 1,25 RHT M mm Internal Thread [mm]: M14 x 1,5 RHT F mm Fitting Position: Front Axle Right
$10.01
no VAT req.
Available: 10+ Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
no image SASIC Tie Rod End SASIC Art-Nr: 7676114 Thread Size: M10x1,25 Paired article numbers: 7676115 for OE number: 485202260R Fitting Position: Front Axle Right
$13.43
no VAT req.
Available: 4 Handling time: About 2 business day(s) Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Tie Rod End MEYLE 36-160200104/HD MEYLE Tie Rod End MEYLE Art-Nr: 36-160200104/HD Thread Size 2: M14x1,5 Thread Size 1: M10x1,25 Length [mm]: 207 mm Fitting Position: Outer Fitting Position: Front Axle Right Additional Info: Cold Climate - Check OE# 'Improved design for longer service life: MEYLE-HD parts, Use also 4 O-rings, Set HT019, Upgrade available! Antiallergenic version: FP 30 007, Upgrade available! Antiallergenic version: FP 21 000-2, DELPHI CVC165, HU6, only for cars with plastic cover Ø 32 mm on top of the upper, combination solution comprising DCU 220, KTS 590, 6 wires on sensor, Trans.ZF HP 500/590, Mot.8220.02.834, CHINA Engine, Aerosus offers brand new air suspension compressors for the, for lowered chassis, SMD 04 TDK CB - Side marker light, LED, ADR, amber, 24V, Type: Punto TD 70, attachment, Click-in connector for flat cable, with 500mm cable, with, deliver enhanced durability. Compared to OE, MEYLE-HD is, Land Rover Discovery 2, that replace the original compressor of your vehicle., reflector, with bent bracket, technically improved with reinforced inner parts, using, Type: Uno 60 Diesel, Type: Punto TD 70 higher quality materials or optimized design solution. Our powerful compressors are made by WABCO, the original equipment manufacturer of Land Rover compressors. Each one is covered by a 2-year warranty by Aerosus. Type: 318i (1987-1991) The new original WABCO compressor comes fully assembled and ready for installation. WABCO air suspension compressors are high-quality products for supplying air to the suspension system. As a key part of the air suspension, a good compressor is vital. WABCO compressors are known for their consistently powerful and reliable performance as well as their exceptional durability. All WABCO compressors are designed for use with 12V vehicle electrical systems and have maintenance-free, integrated air dryers. Our strong collaboration with WABCO means that we can offer the same compressor unit at a significantly lower price than Land Rover dealerships. After installation of the compressor, Aerosus recommends that you check the complete air suspension system for any leakage. The most common cause of compressor failure is a leak in the air suspension system, most likely in one of the air springs. Leaky air springs should be replaced immediately to maintain optimum compressor performance. Features Original WABCO compressor High performance Security and durability Powerful and reliable Maintenance-free Reduced noise and vibration Integrated air dryer Compact design Easy installation Thousands of satisfied customers worldwide COM plug. Bosch type. FE04 D1 - Front position light, LED, ADR, amber, 24V, with, 130A, Diodes 8x50A, With triodiode, Electric & Pump motors, Upgrade available! Antiallergenic version: FP 3139, excl. active height control, Use also HT022, Upgrade available! Antiallergenic version: FP 23 014-2, CLASS, 286mm Vented Disc, For advanced distance measurement, Pad Length 134mm, 'Improved performance and service life: larger ball pin, Aerosus air springs replace the original Mercedes air, VT/VTO-Serie life:, springs of your vehicle and offer you maximum ride comfort, Type: Discovery 300 Tdi, 300mm cable, DT 2-pins connector Hydraulic system, power steering/levelling, with high durability. Security, accuracy and quality of the, larger ball pin diameter of MEYLE-HD ball joint distributes forces over a larger surface area and minimizes, product match the original part. part wear. This brand new rear air spring fits both left and right side of Mercedes-Benz E-Class (W211 / S211) 4matic vehicles. Please kindly notice that those air springs must, Type: 324d (1988-1991) be replaced in pairs. The air spring has an integrated solenoid valve. It also features high-strength crimping rings and a custom-designed tapered piston for a comfortable ride. The air tank, which is attached to the original part, has been eliminated in the design of this product, which simplifies the installation process. Aerosus suspension air bags are made of high-quality elastomer materials and covered by a 2-year limited warranty. The rings on the air springs are crimped using a special technology for dependable operation and leak-free performance. They are known for their superior dynamic properties as well as their long life and reliable durability. Our air springs keep your vehicle level, even when carrying an uneven load. This means more effective handling and braking even in tough road and heavily loaded conditions. Features OE-quality air spring Maximum ride comfort High-quality OE-specified raw materials Airline Fitting Integrated Air Tank Security and durability Safe load carrying capacity and stability Easy installation Thousands of satisfied customers worldwide Does not take vac pump 4-year warranty on all MEYLE-HD parts., Webasto Aerosphere W, Ref.Webasto 1101892C, Qte 4,, 130A,12X 35A Diode Avalanche, For testing of Common Rail high-pressure pumps of latest g, Relief 21.50mm, CUMMINS, Aerosus shock absorbers replace the original shock absorber, Upgrade available! Antiallergenic version: FP 34 003, excl. S-Line, Audi Electr. Damping Control, Allroad, HD susp, Upgrade available! Antiallergenic version: FP 2440, 257mm solid disc, FIAT (steering), SMD 04 DK1 Super seal - Side marker light, LED, ADR, amber, 24V, with reflector, Superseal 2-pins connector, of your vehicle and offer you maximum ride comfort with, eneration, Transferbox/P.T.O., Engineered and quality approved in Germany., ension, S4, S4/RS4 Avant high durability. Security, accuracy of fit and quality of, Type: Discovery 300 Tdi the product match the original part. This brand new rear shock absorber fits both left and right side of Mercedes GL-Class (X164 chassis) vehicles without ADS and Mercedes ML (W164 chassis) vehicles without, Type: 325td (1991-1995) ADS (Adaptive Damping System). Aerosus shock absorbers are made of high-quality materials and are covered by a 2-year limited warranty. Our shock absorbers provide high-performance and dynamics while ensuring perfect grip and maximum driving comfort in any situation. As well as improving vehicle stability, they optimise passenger comfort by reducing the magnitude of vibratory motions due to road imperfections, giving you a smooth ride. Our dampers are designed for superior ride quality by adjusting quickly to different road and vehicle conditions, while offering ultimate safety and functionality. Features High-quality shock absorber Security and durability Brand new part Maximum ride comfort Perfect road grip Improved vehicle stability Easy installation Protective dust cover Thousands of satisfied customers worldwide paired article number: 36-16 020 0105/HD
$18.04
no VAT req.
Available: 10+ Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro

ACKOJAP Ball Joint

Inner Tie Rod ACKOJAP A26-1133 ACKOJAP Inner Tie Rod ACKOJAP Art-Nr: A26-1133 Fitting Position: Front Axle External Thread 1 [mm]: M14 x 1,5 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$8.11
no VAT req.
Available: 10+ Available: 10+ Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Inner Tie Rod ACKOJAP A32-1129 ACKOJAP Inner Tie Rod ACKOJAP Art-Nr: A32-1129 Length [mm]: 295 mm Fitting Position: Front Axle both sides External Thread [mm]: M14 x 1,5 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$14.28
no VAT req.
Available: 10+ Available: 10+ Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Inner Tie Rod ACKOJAP A32-1131 ACKOJAP Inner Tie Rod ACKOJAP Art-Nr: A32-1131 Length [mm]: 160 mm Fitting Position: Front Axle both sides External Thread [mm]: M18x15,5 mm External Thread 1 [mm]: M14x1,5 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$14.18
no VAT req.
Available: 10+ Available: 10+ Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Inner Tie Rod ACKOJAP A37-1102 ACKOJAP Inner Tie Rod ACKOJAP Art-Nr: A37-1102 Colour: Grey Length [mm]: 355 mm Weight [kg]: 0.72 kg Surface: Phosphatized Material: Steel Fitting Position: Front Axle both sides External Thread [mm]: M14 x 1,5 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$12.66
no VAT req.
Available: 7 Available: 7 Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Inner Tie Rod ACKOJAP A37-1139 ACKOJAP Inner Tie Rod ACKOJAP Art-Nr: A37-1139 Weight [kg]: 0.523 kg Length [mm]: 330 mm Fitting Position: Front Axle Thread Length [mm]: 19 mm External Thread [mm]: M 12 x 1,25 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$11.21
no VAT req.
Available: 10 Available: 10 Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Inner Tie Rod ACKOJAP A37-1140 ACKOJAP Inner Tie Rod ACKOJAP Art-Nr: A37-1140 Thread Length [mm]: 56 mm Weight [kg]: 0.68 kg Length [mm]: 338 mm Fitting Position: Front Axle Fitting Position: Right Fitting Position: Left External Thread 1 [mm]: M14 x 1,5 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$12.02
no VAT req.
Available: 10+ Available: 10+ Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Ball Joint ACKOJAP A38-1199 ACKOJAP Ball Joint ACKOJAP Art-Nr: A38-1199 Cone Size [mm]: 16 mm Fitting Position: Front Axle Right Fitting Position: Front Axle Left Fitting Position: Lower Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$12.94
no VAT req.
Available: 10+ Available: 10+ Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Inner Tie Rod ACKOJAP A52-1178 ACKOJAP Inner Tie Rod ACKOJAP Art-Nr: A52-1178 Weight [kg]: 0.61 kg Surface: Phosphatized Material: Steel Colour: Grey Length [mm]: 243 mm Fitting Position: Front Axle both sides External Thread [mm]: M16 x 1,5 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$9.89
no VAT req.
Available: 10 Available: 10 Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Tie Rod End ACKOJAP A52-1219 ACKOJAP Tie Rod End ACKOJAP Art-Nr: A52-1219 Fitting Position: Front Axle Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$12.99
no VAT req.
Available: 10+ Available: 10+ Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Inner Tie Rod ACKOJAP A53-0119 ACKOJAP Inner Tie Rod ACKOJAP Art-Nr: A53-0119 Fitting Position: Front Axle Fitting Position: Left External Thread 1 [mm]: M14 x 1,5 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$9.86
no VAT req.
Available: 10+ Available: 10+ Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro