$17.97
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
$17.97
Have questions about this item?
You can pay for your order using any of these types of cards: Visa, MasterCard; as well as through these payment systems: PayPal and Bank transfer. All orders need to be prepaid to start processing. The parts are not reserved until the payment is received.
We provide worldwide shipping, but some parts cannot be processed in an automatic way. In all those cases the manager will contact you and will offer special delivery.

Tie Rod End

Art-Nr: A38-9631

ACKOJAP
Supplier: ACKOJAP
Tie Rod End ACKOJAP A38-9631
Tie Rod End ACKOJAP A38-9631 main

Product info

Fitting Position:
Left
Additional Info:
In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
EAN:
4062375228508
Category:
Steering Joints
 
Track Rod/ Joints
 
Ball Joint
 
Tie Rod Assembly/ Parts
Condition:
new
Item Number:
A389631
Brand
Code
555
SE-N151L
A.B.S.
231022
ACKOJAP
A38-9631
ASHIKA
111-01-1011L
AYD
9113474
BIRTH
RS0121
BLUE PRINT
ADN187188
BLUE PRINT
ADN187236
BORG & BECK
BTR5720
CORTECO
49401893
DELPHI
TA3007
FAI AutoParts
SS7720
FEBEST
0221-J32LH
FEBI BILSTEIN
42738
FIRST LINE
FTR5720
FORMPART
4102077
G.U.D.
GSP201526
GSP
S071037
HERTH+BUSS JAKOPARTS
J4821125
JAPANPARTS
TI-1011L
JAPKO
1111011L
KAVO PARTS
STE-6627
LEMFÖRDER
44225 01
LYNXauto
C4356L
MAGNETI MARELLI
301191605770
MDR
MTR-81011L
MGA
DR8957
MOOG
NI-ES-15801
MOOG
AMGES800512
NIPPARTS
N4821116
NISSAN
D8640-1AA1A
NISSAN
D8640-JA00A
NISSAN
D8F40-1AA0A
NISSAN
D8640-1AA0A
NPS
N410N225
OCAP
0295739
OPTIMAL
G1-1368
PATRON
PS1294L
PEMEBLA
JAPTI-1011L
RTS
91-92316-2
SIDEM
41436
SKF
VKDY 812027
STELLOX
51-00368-SX
SWAG
82 94 2738
TALOSA
42-07959
TRW
JTE7791
VEMA
26677
Brand Model Engine code Fuel Displacement HP KW Year
INFINITIFXV9XDiesel3.0238hp175kw2010-now
Important notes:Construction year from: 201203;Fitting Position: outer
INFINITIFXVK50VEPetrol5.0390hp287kw2008-now
Important notes:Construction year from: 201207;Fitting Position: outer
INFINITIFXVK50VEPetrol5.0395hp291kw2008-now
Important notes:Construction year from: 201207;Fitting Position: outer
INFINITIFXVK50VEPetrol5.0420hp309kw2013-2013
Important notes:Fitting Position: outer
INFINITIFXVQ37VHRPetrol3.7320hp235kw2008-now
Important notes:Construction year from: 201207;Fitting Position: outer
INFINITIFXVQ37VHRPetrol3.7329hp242kw2012-now
Important notes:Fitting Position: outer
INFINITIFXVQ37VHRPetrol3.7333hp245kw2008-2013
Important notes:Construction year from: 201207;Fitting Position: outer
INFINITIQX70V9XDiesel3.0238hp175kw2013-now
Important notes:Fitting Position: outer
INFINITIQX70VK50VEPetrol5.0390hp287kw2013-now
Important notes:Fitting Position: outer
INFINITIQX70VK50VEPetrol5.0400hp294kw2013-now
Important notes:Fitting Position: outer
INFINITIQX70VQ37VHRPetrol3.7320hp235kw2013-now
Important notes:Fitting Position: outer
INFINITIQX70VQ37VHRPetrol3.7329hp242kw2013-now
Important notes:Fitting Position: outer
INFINITIQX70VQ37VHRPetrol3.7333hp245kw2014-now
Important notes:Fitting Position: outer
NISSANALTIMA (L32)QR25DEPetrol2.5174hp128kw2006-2013
Important notes:Fitting Position: outer
NISSANALTIMA (L32)QR25DEPetrol2.5188hp138kw2010-2012
Important notes:Fitting Position: outer
NISSANALTIMA (L32)VQ35DEPetrol3.5273hp201kw2006-2013
Important notes:Fitting Position: outer
NISSANALTIMA (L32)VQ35DEPetrol3.5286hp210kw2010-2012
Important notes:Fitting Position: outer
NISSANALTIMA Coupe (CL32)QR25DEPetrol/Electric2.5201hp148kw2007-2013
Important notes:Fitting Position: outer
NISSANALTIMA Coupe (CL32)QR25DEPetrol2.5178hp131kw2009-2013
Important notes:Fitting Position: outer
NISSANALTIMA Coupe (CL32)VQ35DEPetrol3.5273hp201kw2007-2013
Important notes:Fitting Position: outer
NISSANALTIMA Coupe (CL32)VQ35DEPetrol3.5286hp210kw2010-2013
Important notes:Fitting Position: outer
NISSANMAXIMA VII (A35)VQ35DEPetrol3.5291hp214kw2008-now
Important notes:Fitting Position: outer
NISSANMAXIMA VII (A35)VQ35DEPetrol3.5294hp216kw2008-now
Important notes:Fitting Position: outer
NISSANMURANO (Z51)VQ35Petrol3.5260hp191kw2009-2014
Important notes:Fitting Position: outer
NISSANMURANO (Z51)VQ35Petrol3.5260hp191kw2011-2014
Important notes:Fitting Position: outer
NISSANMURANO (Z51)VQ35DEPetrol3.5249hp183kw2010-2014
Important notes:Fitting Position: outer
NISSANMURANO (Z51)VQ35DEPetrol3.5256hp188kw2008-2014
Important notes:Fitting Position: outer
NISSANMURANO (Z51)VQ35DEPetrol3.5260hp191kw2009-2014
Important notes:Fitting Position: outer
NISSANMURANO (Z51)VQ35DEPetrol3.5260hp191kw2011-2014
Important notes:Fitting Position: outer
NISSANMURANO (Z51)VQ35DEPetrol3.5265hp195kw2007-2014
Important notes:Fitting Position: outer
NISSANMURANO (Z51)VQ35DEPetrol3.5269hp198kw2008-2010
Important notes:Fitting Position: outer
NISSANMURANO (Z51)YD25DDTiDiesel2.5190hp140kw2010-2014
Important notes:Fitting Position: outer
NISSANMURANO II (Z51)VQ35Petrol3.5260hp191kw2009-2014
Important notes:Fitting Position: outer
NISSANMURANO II (Z51)VQ35Petrol3.5260hp191kw2011-2014
Important notes:Fitting Position: outer
NISSANMURANO II (Z51)VQ35DEPetrol3.5249hp183kw2010-2014
Important notes:Fitting Position: outer
NISSANMURANO II (Z51)VQ35DEPetrol3.5256hp188kw2008-2014
Important notes:Fitting Position: outer
NISSANMURANO II (Z51)VQ35DEPetrol3.5260hp191kw2009-2014
Important notes:Fitting Position: outer
NISSANMURANO II (Z51)VQ35DEPetrol3.5260hp191kw2011-2014
Important notes:Fitting Position: outer
NISSANMURANO II (Z51)VQ35DEPetrol3.5265hp195kw2007-2014
Important notes:Fitting Position: outer
NISSANMURANO II (Z51)VQ35DEPetrol3.5269hp198kw2008-2010
Important notes:Fitting Position: outer
NISSANMURANO II (Z51)YD25DDTiDiesel2.5190hp140kw2010-2014
Important notes:Fitting Position: outer
NISSANTEANA II (J32)QR25DEPetrol2.5167hp123kw2010-2013
Important notes:Fitting Position: outer;not for vehicle production country: Russia;not for vehicle type: J32Z
NISSANTEANA II (J32)VQ25DEPetrol2.5179hp132kw2013-2013
Important notes:Fitting Position: outer;not for vehicle production country: Russia;not for vehicle type: J32Z
NISSANTEANA II (J32)VQ25DEPetrol2.5182hp134kw2008-2013
Important notes:Fitting Position: outer;not for vehicle production country: Russia;not for vehicle type: J32Z
NISSANTEANA II (J32)VQ35DEPetrol3.5249hp183kw2008-2013
Important notes:Fitting Position: outer;not for vehicle production country: Russia;not for vehicle type: J32Z

SIMILAR PRODUCTS FOR YOUR VEHICLE

Tie Rod End SWAG 82942738 SWAG Tie Rod End SWAG Art-Nr: 82942738 Fitting Position: Front Axle Left Spanner Size: 19 Length [mm]: 238 mm Weight [kg]: 0,950 kg Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Supplementary Article/Info 2: with crown nut External Thread Size: M12 x 1,25 Internal Thread Size: M14 x 1,5 Thickness [mm]: 93 mm paired article number: 82 94 2737
$23.44
no VAT req.
Available: 4 Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Tie Rod End JP Group 4044601570 JP Group Tie Rod End JP Group Art-Nr: 4044601570 Fitting Position: Front Axle Left
$8.48
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
no image INFINITI Socket Kit - Tie Rod, Outer INFINITI Art-Nr: D8640-1AA1A
$266.90
no VAT req.
Special Order Handling time: 15-25 business day(s) Handling Time: 15-25 business day(s)
?
The item should be shipped within 15-25 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Tie Rod End FEBI BILSTEIN 42738 FEBI BILSTEIN Tie Rod End FEBI BILSTEIN Art-Nr: 42738 Length [mm]: 238 mm Spanner Size: 19 Fitting Position: Front Axle Left Weight [kg]: 0.87 kg Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Supplementary Article/Info 2: with crown nut External Thread Size: M12 x 1,25 Internal Thread Size: M14 x 1,5 Thickness [mm]: 93 mm paired article number: 42737
$25.00
no VAT req.
Available: 1 Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Tie Rod End DELPHI TA3007 DELPHI Tie Rod End DELPHI Art-Nr: TA3007 Dimensions: 272x92x73mm Additional Info: Nissan Additional Info: Altima Height [mm]: 92 mm Width [mm]: 53 mm Length [mm]: 238 mm Cone Size [mm]: 14 mm Thread Type: with right-hand thread Thread Size: M14x1.5
$9.67
no VAT req.
Available: 5 Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Tie Rod End BLUE PRINT ADN187188 BLUE PRINT Tie Rod End BLUE PRINT Art-Nr: ADN187188 Weight [kg]: 0,950 kg Fitting Position: Front Axle Left Spanner Size: 19 Length [mm]: 238 mm Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Supplementary Article/Info 2: with crown nut External Thread Size: M12 x 1,25 Internal Thread Size: M14 x 1,5 Thickness [mm]: 93 mm paired article number: ADN187187
$23.74
no VAT req.
Available: 4 Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Tie Rod End BLUE PRINT ADN187236 BLUE PRINT Tie Rod End BLUE PRINT Art-Nr: ADN187236 Weight [kg]: 0.82 kg Fitting Position: Front Axle Left Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Supplementary Article/Info 2: with crown nut External Thread Size: M12 x 1,25 Internal Thread Size: M14 x 1,5 Length [mm]: 216 mm paired article number: ADN187235
$19.44
no VAT req.
Available: 4 Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Tie Rod End TRISCAN 850014156 TRISCAN Tie Rod End TRISCAN Art-Nr: 850014156 Length [mm]: 216 mm Required quantity: 1 Inner thread [mm]: 14x1,5 mm Thread Type: with right-hand thread
$16.98
no VAT req.
Available: 9 Special Order Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Handling time: About 30 business day(s) Handling Time: About 30 business day(s)
?
The item should be shipped within 30 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
no image MAGNETI MARELLI Tie Rod End MAGNETI MARELLI Art-Nr: 301191605770 Rod/Strut: Camber Link Fitting Position: Front Axle Left
$12.27
no VAT req.
Available: 1 Special Order Handling time: About 10 business day(s) Handling Time: About 10 business day(s)
?
The item should be shipped within 10 business day(s) of receiving cleared payment.
Handling time: About 30 business day(s) Handling Time: About 30 business day(s)
?
The item should be shipped within 30 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
no image FEBEST Tie Rod End FEBEST Art-Nr: 0221J32LH Weight [kg]: 0,937 kg Quantity: 3 Packaging width [cm]: 9,5 cm Packaging length [cm]: 24,5 cm Packaging height [cm]: 5,5 cm Fitting Position: Right Front
$11.64
no VAT req.
Available: 2 Handling time: About 2 business day(s) Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro

ACKOJAP Ball Joint

Inner Tie Rod ACKOJAP A26-1133 ACKOJAP Inner Tie Rod ACKOJAP Art-Nr: A26-1133 Fitting Position: Front Axle External Thread 1 [mm]: M14 x 1,5 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$8.18
no VAT req.
Available: 10+ Available: 10+ Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Inner Tie Rod ACKOJAP A32-1129 ACKOJAP Inner Tie Rod ACKOJAP Art-Nr: A32-1129 Length [mm]: 295 mm Fitting Position: Front Axle both sides External Thread [mm]: M14 x 1,5 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$14.41
no VAT req.
Available: 10+ Available: 10+ Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Inner Tie Rod ACKOJAP A32-1131 ACKOJAP Inner Tie Rod ACKOJAP Art-Nr: A32-1131 Length [mm]: 160 mm Fitting Position: Front Axle both sides External Thread [mm]: M18x15,5 mm External Thread 1 [mm]: M14x1,5 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$14.31
no VAT req.
Available: 10+ Available: 10+ Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Inner Tie Rod ACKOJAP A37-1102 ACKOJAP Inner Tie Rod ACKOJAP Art-Nr: A37-1102 Colour: Grey Length [mm]: 355 mm Weight [kg]: 0.72 kg Surface: Phosphatized Material: Steel Fitting Position: Front Axle both sides External Thread [mm]: M14 x 1,5 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$12.77
no VAT req.
Available: 7 Available: 7 Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Inner Tie Rod ACKOJAP A37-1139 ACKOJAP Inner Tie Rod ACKOJAP Art-Nr: A37-1139 Weight [kg]: 0.523 kg Length [mm]: 330 mm Fitting Position: Front Axle Thread Length [mm]: 19 mm External Thread [mm]: M 12 x 1,25 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$11.31
no VAT req.
Available: 10 Available: 10 Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Inner Tie Rod ACKOJAP A37-1140 ACKOJAP Inner Tie Rod ACKOJAP Art-Nr: A37-1140 Thread Length [mm]: 56 mm Weight [kg]: 0.68 kg Length [mm]: 338 mm Fitting Position: Front Axle Fitting Position: Right Fitting Position: Left External Thread 1 [mm]: M14 x 1,5 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$12.12
no VAT req.
Available: 10+ Available: 10+ Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Ball Joint ACKOJAP A38-1199 ACKOJAP Ball Joint ACKOJAP Art-Nr: A38-1199 Cone Size [mm]: 16 mm Fitting Position: Front Axle Right Fitting Position: Front Axle Left Fitting Position: Lower Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$13.05
no VAT req.
Available: 10+ Available: 10+ Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Inner Tie Rod ACKOJAP A52-1178 ACKOJAP Inner Tie Rod ACKOJAP Art-Nr: A52-1178 Weight [kg]: 0.61 kg Surface: Phosphatized Material: Steel Colour: Grey Length [mm]: 243 mm Fitting Position: Front Axle both sides External Thread [mm]: M16 x 1,5 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$9.98
no VAT req.
Available: 10 Available: 10 Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Tie Rod End ACKOJAP A52-1219 ACKOJAP Tie Rod End ACKOJAP Art-Nr: A52-1219 Fitting Position: Front Axle Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$13.11
no VAT req.
Available: 10+ Available: 10+ Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Inner Tie Rod ACKOJAP A53-0119 ACKOJAP Inner Tie Rod ACKOJAP Art-Nr: A53-0119 Fitting Position: Front Axle Fitting Position: Left External Thread 1 [mm]: M14 x 1,5 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$9.94
no VAT req.
Available: 10+ Available: 10+ Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro