$48.08
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
$48.08
Have questions about this item?
You can pay for your order using any of these types of cards: Visa, MasterCard; as well as through these payment systems: PayPal and Bank transfer. All orders need to be prepaid to start processing. The parts are not reserved until the payment is received.
We provide worldwide shipping, but some parts cannot be processed in an automatic way. In all those cases the manager will contact you and will offer special delivery.

Control Arm/Trailing Arm, wheel suspension

Art-Nr: A38-9584

ACKOJAP
Supplier: ACKOJAP
Control Arm/Trailing Arm, wheel suspension ACKOJAP A38-9584
Control Arm/Trailing Arm, wheel suspension ACKOJAP A38-9584 main

Product info

Supplementary Article/Info 2:
with rubber mounting
 
with ball joint
paired article number:
A38-9585
Material:
Sheet Steel
Fitting Position:
Lower
 
Front Axle Left
Control/Trailing Arm Type:
Control Arm
Additional Info:
In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
EAN:
4062375204090
Category:
Steering Links / Mounting
 
Steering Link
 
Control Arm/Swing Arm Joint
Condition:
new
Item Number:
A389584
Brand
Code
ACKOJAP
A38-9584
ASHIKA
72-01-179L
BGA
TRC6326
BIRTH
BR2367
BORG & BECK
BCA7439
COMLINE
CCA1332L
CORTECO
49100034
DELPHI
TC3910
DYS
20-25303
FAI AutoParts
SS8907
FEBI BILSTEIN
176533
FIRST LINE
FCA7439
FORMPART
4109078
FRAP
F4822
GSP
S062198
HERTH+BUSS JAKOPARTS
J4901075
IAP QUALITY PARTS
503-13111
JAPANPARTS
BS-179L
JAPKO
72179L
KAVO PARTS
SCA-6729
KAWE
8500 25584
LEMFÖRDER
42765 01
MAGNETI MARELLI
301181386800
MANDO
MSA015523
MAPCO
59156
METZGER
58100901
MEYLE
36-16 050 0099
MONROE
L25584
MOOG
NI-WP-15273
MOTAQUIP
LVSA1838
NIPPARTS
N4901049
NISSAN
54501-4EA0B
NISSAN
545014EA0C
NK
5013969
NPS
N421N172
NTY
ZWD-NS-145
OPTIMAL
G6-2106
Omnicraft
2399122
PEMEBLA
JAPBS-179L
QUINTON HAZELL
QSA2836S
RED-LINE
40NI191
RENAULT
545014EA0B
SASIC
7474061
SIDEM
41672
SKF
VKDS 822046 B
SPIDAN CHASSIS PARTS
59246
STELLOX
57-00031-SX
SWAG
33 10 3605
TALOSA
40-04899
TOPRAN
629 740
TRISCAN
8500 25584
VEMA
27145
Brand Model Engine code Fuel Displacement HP KW Year
NISSANQASHQAI II SUV (J11, J11_)HR13DDTPetrol1.3140hp103kw2018-now
NISSANQASHQAI II SUV (J11, J11_)HR13DDTPetrol1.3160hp118kw2018-now
NISSANQASHQAI II SUV (J11, J11_)HRA2DDTPetrol1.2115hp85kw2013-now
NISSANQASHQAI II SUV (J11, J11_)K9K 636Diesel1.5110hp81kw2013-now
NISSANQASHQAI II SUV (J11, J11_)K9K 646Diesel1.5110hp81kw2013-now
NISSANQASHQAI II SUV (J11, J11_)K9K 872Diesel1.5116hp85kw2018-now
NISSANQASHQAI II SUV (J11, J11_)MR16DDTPetrol1.6163hp120kw2014-now
NISSANQASHQAI II SUV (J11, J11_)MR20DDPetrol2.0140hp103kw2015-now
NISSANQASHQAI II SUV (J11, J11_)MR20DDPetrol2.0144hp106kw2014-now
NISSANQASHQAI II SUV (J11, J11_)MR20DDPetrol2.0144hp106kw2015-now
NISSANQASHQAI II SUV (J11, J11_)R9MDiesel1.6130hp96kw2013-now
NISSANQASHQAI II SUV (J11, J11_)R9N 401Diesel1.7150hp110kw2019-now
RENAULTKADJAR (HA_, HL_)H5F 408Petrol1.2130hp96kw2015-now
RENAULTKADJAR (HA_, HL_)H5H 470Petrol1.3140hp103kw2018-now
RENAULTKADJAR (HA_, HL_)H5H 470Petrol1.3160hp117kw2018-now
RENAULTKADJAR (HA_, HL_)K9K 646Diesel1.5110hp81kw2015-now
RENAULTKADJAR (HA_, HL_)K9K 647Diesel1.5110hp81kw2015-now
RENAULTKADJAR (HA_, HL_)K9K 648Diesel1.5110hp81kw2015-now
RENAULTKADJAR (HA_, HL_)K9K 649Diesel1.5110hp81kw2015-now
RENAULTKADJAR (HA_, HL_)K9K 872Diesel1.5116hp85kw2018-now
RENAULTKADJAR (HA_, HL_)K9K 873Diesel1.5116hp85kw2018-now
RENAULTKADJAR (HA_, HL_)M5M460Petrol1.6163hp120kw2016-now
RENAULTKADJAR (HA_, HL_)R9M 414Diesel1.6130hp96kw2015-now
RENAULTKADJAR (HA_, HL_)R9N 401Diesel1.7150hp110kw2018-now

SIMILAR PRODUCTS FOR YOUR VEHICLE

no image RENAULT Part - 545014Ea0b - Link Compl-Transv, RENAULT Art-Nr: 545014EA0B
$93.85
no VAT req.
Special Order Handling time: 20-30 business day(s) Handling Time: 20-30 business day(s)
?
The item should be shipped within 20-30 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Track Control Arm TRISCAN 850025584 TRISCAN Track Control Arm TRISCAN Art-Nr: 850025584 Required quantity: 1 Supplementary Article/Info 2: with rubber mounting Supplementary Article/Info 2: with ball joint Steering arm type: Control Arm
$57.73
no VAT req.
Available: 10+ Special Order Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Handling time: About 30 business day(s) Handling Time: About 30 business day(s)
?
The item should be shipped within 30 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Ball Joint DENCKERMANN D110148 DENCKERMANN Ball Joint DENCKERMANN Art-Nr: D110148 Outer diameter [mm]: 41,1 mm Fitting Position: Front Axle left and right Cone Size [mm]: 20 mm
$6.89
no VAT req.
Available: 3 Handling time: About 2 business day(s) Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
no image skf Ball Joint skf Art-Nr: VKDS812007
$13.38
no VAT req.
Available: 10+ Handling time: About 2 business day(s) Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Track Control Arm JAPKO 72179L JAPKO Track Control Arm JAPKO Art-Nr: 72179L Fitting Position: Lower Fitting Position: Front Axle Left
$43.15
no VAT req.
Available: 2 Handling time: About 2 business day(s) Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Ball Joint SASIC 7574018 SASIC Ball Joint SASIC Art-Nr: 7574018 Joint diameter (mm): 20 mm for OE number: Part/oe 545040445R Fitting Position: Lower Fitting Position: Front Axle left and right
$10.34
no VAT req.
Available: 3 Handling time: About 2 business day(s) Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Control Arm-/Trailing Arm Bush FEBEST NABJ11B FEBEST Control Arm-/Trailing Arm Bush FEBEST Art-Nr: NABJ11B Weight [kg]: 0,41 kg Quantity: 1 Packaging width [cm]: 5,8 cm Packaging length [cm]: 6,5 cm Packaging height [cm]: 5,8 cm Fitting Position: Lower Fitting Position: Left and right Fitting Position: Front Axle
$15.75
no VAT req.
Available: 1 Handling time: About 2 business day(s) Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Repair Kit, ball joint FEBEST NBJBJ31 FEBEST Repair Kit, ball joint FEBEST Art-Nr: NBJBJ31 Weight [kg]: 0,02 kg Packaging width [cm]: 4,0 cm Packaging length [cm]: 4,0 cm Packaging height [cm]: 2,5 cm Fitting Position: Lower Fitting Position: Front Axle left and right
$2.44
no VAT req.
Available: 2 Handling time: About 2 business day(s) Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
no image SASIC Track Control Arm SASIC Art-Nr: 7474061 Steering arm type: Wishbone (CV) Paired article numbers: 7474062 Joint diameter (mm): 20 mm for OE number: 545014EA0B Fitting Position: Lower Fitting Position: Front Axle Left
$50.33
no VAT req.
Available: 1 Handling time: About 2 business day(s) Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
no image SASIC Track Control Arm SASIC Art-Nr: 2254027 Steering arm type: Wishbone (CV) Paired article numbers: 2254026 Outer Length [mm]: 35,5 mm Outer diameter [mm]: 57,8 mm Inner Length [mm]: 65 mm Inner diameter [mm]: 12 mm for OE number: Part/oe 545014EA0B Fitting Position: Rear Fitting Position: Lower Fitting Position: Front Axle left and right
$12.44
no VAT req.
Available: 5 Handling time: About 2 business day(s) Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro

ACKOJAP Control Arm/Swing Arm Joint

Control Arm/Trailing Arm, wheel suspension ACKOJAP A32-1137 ACKOJAP Control Arm/Trailing Arm, wheel suspension ACKOJAP Art-Nr: A32-1137 Fitting Position: Front Axle Fitting Position: Left Control/Trailing Arm Type: Control Arm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$57.11
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Control Arm/Trailing Arm, wheel suspension ACKOJAP A32-1138 ACKOJAP Control Arm/Trailing Arm, wheel suspension ACKOJAP Art-Nr: A32-1138 Fitting Position: Front Axle Fitting Position: Right Control/Trailing Arm Type: Control Arm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$57.11
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Control Arm/Trailing Arm, wheel suspension ACKOJAP A32-1142 ACKOJAP Control Arm/Trailing Arm, wheel suspension ACKOJAP Art-Nr: A32-1142 Fitting Position: Rear Axle Control/Trailing Arm Type: Control Arm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$44.00
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Control Arm/Trailing Arm, wheel suspension ACKOJAP A37-1141 ACKOJAP Control Arm/Trailing Arm, wheel suspension ACKOJAP Art-Nr: A37-1141 Fitting Position: Lower Front Axle Fitting Position: Right Control/Trailing Arm Type: Control Arm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$32.65
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Mounting, control/trailing arm ACKOJAP A38-0208 ACKOJAP Mounting, control/trailing arm ACKOJAP Art-Nr: A38-0208 Required quantity: 2 Fitting Position: Front Axle Fitting Position: Front Mounting Type: Rubber-Metal Mount Control/Trailing Arm Type: for control arm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$2.80
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Control Arm/Trailing Arm, wheel suspension ACKOJAP A38-1160 ACKOJAP Control Arm/Trailing Arm, wheel suspension ACKOJAP Art-Nr: A38-1160 Fitting Position: Lower Cone Size [mm]: 16 mm Fitting Position: Front Axle Right Control/Trailing Arm Type: Control Arm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$44.78
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Control Arm/Trailing Arm, wheel suspension ACKOJAP A52-0246 ACKOJAP Control Arm/Trailing Arm, wheel suspension ACKOJAP Art-Nr: A52-0246 Fitting Position: Front Axle Right paired article number: A52-0247 Control/Trailing Arm Type: Control Arm Article number of the recommended special tool: V99-1020 Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$117.18
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Control Arm/Trailing Arm, wheel suspension ACKOJAP A64-1118 ACKOJAP Control Arm/Trailing Arm, wheel suspension ACKOJAP Art-Nr: A64-1118 Fitting Position: Front Axle Left Control/Trailing Arm Type: Control Arm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$41.61
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Control Arm/Trailing Arm, wheel suspension ACKOJAP A64-1119 ACKOJAP Control Arm/Trailing Arm, wheel suspension ACKOJAP Art-Nr: A64-1119 Fitting Position: Front Axle Right Control/Trailing Arm Type: Control Arm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$45.32
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Mounting, control/trailing arm ACKOJAP A70-0464 ACKOJAP Mounting, control/trailing arm ACKOJAP Art-Nr: A70-0464 Fitting Position: Rear Length [mm]: 89 mm Inner diameter [mm]: 14.5 mm Outer diameter [mm]: 56 mm Mounting Type: Rubber-Metal Mount Fitting Position: Front Axle Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$10.89
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro