$88.80
no VAT req.
Available: 2
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
$88.80
Have questions about this item?
You can pay for your order using any of these types of cards: Visa, MasterCard; as well as through these payment systems: PayPal and Bank transfer. All orders need to be prepaid to start processing. The parts are not reserved until the payment is received.
We provide worldwide shipping, but some parts cannot be processed in an automatic way. In all those cases the manager will contact you and will offer special delivery.
Clutch Kit
Art-Nr: 100264
Supplier:
STATIM
Product info
Diameter [mm]:
215 mm
Hub Profile:
20x23 - 20N
Category:
Clutch Kit
Condition:
new
Item Number:
100264
Brand
Code
STATIM
100264
| Brand | Model | Engine code | Fuel | Displacement | HP | KW | Year |
| FIAT | IDEA (350_) | 188 A9.000 | Diesel | 1.3 | 70hp | 51kw | 2004-now |
| LANCIA | MUSA (350_) | 188 A9.000 | Diesel | 1.3 | 70hp | 51kw | 2004-2012 |
SIMILAR PRODUCTS FOR YOUR VEHICLE
Engine oil sump with opening for oil level sensor
Art-Nr: 03C103603T
Important Notes: BLG, BMY, CAXA
$192.09
no VAT req.
Special Order
Handling time: 15-20 business day(s)
Handling Time: 15-20 business day(s)
?
The item should be shipped within 15-20 business day(s) of receiving cleared payment.
Add to wishlist
Oil Sump
Art-Nr: V10-2368
Supplementary Article/Supplementary Info: with oil drain plug
Supplementary Article/Info 2: with bore for oil-level sensor
Height [mm]: 160 mm
Length [mm]: 420 mm
Section: Lower Section
Weight [kg]: 2,514 kg
Supplementary Article/Info 2: without oil sump gasket
Supplementary Article/Info 2: with seal ring
Oil sump Material: Aluminium
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
Width [mm]: 238,0 mm
$60.76
no VAT req.
Available: 10+
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Oil Sump
Art-Nr: 7990018
Supplementary Article/Info 2: with bore for oil-level sensor
Supplementary Article/Supplementary Info: with oil drain plug
Supplementary Article/Info 2: without oil sump gasket
Oil sump Material: Die-Cast Aluminium
$50.80
no VAT req.
Available: 10+
Special Order
Handling time: About 10 business day(s)
Handling Time: About 10 business day(s)
?
Handling time: About 30 business day(s)
Handling Time: About 30 business day(s)
The item should be shipped within 10 business day(s) of receiving cleared payment.
?
The item should be shipped within 30 business day(s) of receiving cleared payment.
Add to wishlist
Oil Sump
Art-Nr: 100264
Length [mm]: 418 mm
Spanner Size: 19
Weight [kg]: 2.175 kg
Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Supplementary Article/Supplementary Info: with oil drain plug
Supplementary Article/Info 2: with seal ring
External Thread Size: M14 x 1,5
$46.88
no VAT req.
Available: 4
Handling time: About 10 business day(s)
Handling Time: About 10 business day(s)
?
The item should be shipped within 10 business day(s) of receiving cleared payment.
Add to wishlist
Seal
Art-Nr: 50-027129717D
Manufactured By: ElringKlinger
Height: 1
Width: 60
Length: 368
$21.59
no VAT req.
Available: 9
Special Order
Handling time: About 10 business day(s)
Handling Time: About 10 business day(s)
?
Handling time: About 60 business day(s)
Handling Time: About 60 business day(s)
The item should be shipped within 10 business day(s) of receiving cleared payment.
?
The item should be shipped within 60 business day(s) of receiving cleared payment.
Add to wishlist
Wet Sump
Art-Nr: 11030828001
Material: Aluminium
Required quantity: 1
Spanner Size: 19
Weight [kg]: 2.175 kg
Outer thread [mm]: M14 x 1,5 mm
Length [mm]: 418 mm
Supplementary Article/Info 2: with bore for oil-level sensor
$55.25
no VAT req.
Available: 2
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
Gasket, intake manifold
Art-Nr: 100264
Gasket Design: Fibre Composite
Fitting Position: Upper
Chemical Properties: Asbestos Free
Additional Info: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
Fitting Position: Suction Pipe
$4.77
no VAT req.
Available: 5
Handling time: About 10 business day(s)
Handling Time: About 10 business day(s)
?
The item should be shipped within 10 business day(s) of receiving cleared payment.
Add to wishlist
Oil Sump
Art-Nr: 113651
Supplementary Article/Info 2: without sensor
Supplementary Article/Info 2: with bore for oil-level sensor
Oil sump Material: Aluminium
Additional Info: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
$56.38
no VAT req.
Available: 5
Handling time: About 10 business day(s)
Handling Time: About 10 business day(s)
?
The item should be shipped within 10 business day(s) of receiving cleared payment.
Add to wishlist
Oil Sump
Art-Nr: BMO-VW-010
Supplementary Article/Info 2: without bore for oil level sensor
$45.51
no VAT req.
Available: 5
Handling time: About 10 business day(s)
Handling Time: About 10 business day(s)
?
The item should be shipped within 10 business day(s) of receiving cleared payment.
Add to wishlist
STATIM Clutch Kit
Clutch Kit
Art-Nr: 100313
Diameter [mm]: 190 mm
Hub Profile: 18,3x20,7 - 24N
$59.81
no VAT req.
Available: 3
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
Clutch Kit
Art-Nr: 100873
Diameter [mm]: 215 mm
Hub Profile: 18x20,6 - 18N
$90.12
no VAT req.
Available: 5
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
Clutch Kit
Art-Nr: 100499
Diameter [mm]: 205 mm
Hub Profile: 15,7x18,7-14N
Clutch Equipment: - bez wysprzeglika
$67.31
no VAT req.
Available: 3
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
Clutch Kit
Art-Nr: 100963
Diameter [mm]: 215 mm
Hub Profile: 20x22,5 - 20N
$60.99
no VAT req.
Available: 3
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
Clutch Kit
Art-Nr: 100720
Diameter [mm]: 180 mm
$55.03
no VAT req.
Available: 3
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
Clutch Kit
Art-Nr: 100760
Clutch Equipment: tuleja prowadzaca
Clutch Equipment: dzwignia wysprzeg.
Diameter [mm]: 200 mm
Hub Profile: 20,3x22,1 - 28N
Clutch Equipment: docisk, tarcza
Clutch Equipment: lozysko
$70.13
no VAT req.
Available: 3
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
Clutch Kit
Art-Nr: 100765
Hub Profile: 20,4 x 22,2 - 28N
Diameter [mm]: 215 mm
$131.38
no VAT req.
Available: 4
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
Clutch Kit
Art-Nr: 100839
Hub Profile: 21,3x24-21N
Diameter [mm]: 200 mm
$56.96
no VAT req.
Available: 3
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
Clutch Kit
Art-Nr: 100116
Hub Profile: 18,2x21 - 18N
Diameter [mm]: 180 mm
$48.20
no VAT req.
Available: 3
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
Clutch Kit
Art-Nr: 100119
Hub Profile: 18,2x20,8-18N
Diameter [mm]: 200 mm
$66.26
no VAT req.
Available: 6
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
