$14.85
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
$14.85
Have questions about this item?
You can pay for your order using any of these types of cards: Visa, MasterCard; as well as through these payment systems: PayPal and Bank transfer. All orders need to be prepaid to start processing. The parts are not reserved until the payment is received.
We provide worldwide shipping, but some parts cannot be processed in an automatic way. In all those cases the manager will contact you and will offer special delivery.
Ball Joint
Art-Nr: A70-9663
Supplier:
ACKOJAP
Product info
Fitting Position:
Lower
Front Axle
Additional Info:
In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
EAN:
4062375228317
Category:
Ball Joint
Condition:
new
Item Number:
A709663
Brand
Code
555
SB-3842
A.B.S.
220610
ACKOJA
A70-9663
ACKOJAP
A70-9663
CAUTEX
755065
DENCKERMANN
D110290
FEBEST
0120-335
LEXUS
48068-60010
LEXUS
48068-60010 part
LEXUS
48069-60010
LYNXauto
C1322LR
MOOG
TO-BJ-13469
Metalcaucho
53193
OPTIMAL
G3-1048
RTS
93-02531
SIDEM
45387
SKF
VKDS 811034
STC
T453193
TRW
JBJ998
ZEKKERT
TG-5277
| Brand | Model | Engine code | Fuel | Displacement | HP | KW | Year |
| TOYOTA | LAND CRUISER (LJ12_, KDJ12_, KZJ12_, GRJ12_, TRJ12_) | 1GR-FE | Petrol | 4.0 | 243hp | 179kw | 2002-2010 |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| TOYOTA | LAND CRUISER (LJ12_, KDJ12_, KZJ12_, GRJ12_, TRJ12_) | 1KD-FTV | Diesel | 3.0 | 163hp | 120kw | 2002-2009 |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| TOYOTA | LAND CRUISER (LJ12_, KDJ12_, KZJ12_, GRJ12_, TRJ12_) | 1KD-FTV | Diesel | 3.0 | 166hp | 122kw | 2004-2009 |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| TOYOTA | LAND CRUISER (LJ12_, KDJ12_, KZJ12_, GRJ12_, TRJ12_) | 1KD-FTV | Diesel | 3.0 | 173hp | 127kw | 2002-2010 |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| TOYOTA | LAND CRUISER (LJ12_, KDJ12_, KZJ12_, GRJ12_, TRJ12_) | 2TR-FE | Petrol | 2.7 | 163hp | 120kw | 2003-2010 |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| TOYOTA | LAND CRUISER (LJ12_, KDJ12_, KZJ12_, GRJ12_, TRJ12_) | 5L-E | Diesel | 3.0 | 95hp | 70kw | 2002-2010 |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| TOYOTA | LAND CRUISER 200 (_J2_) | 1UR-FE | Petrol | 4.6 | 318hp | 234kw | 2012-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right;Vehicle type: Land Cruiser V8 | |||||||
| TOYOTA | LAND CRUISER 200 (_J2_) | 1VD-FTV | Diesel | 4.5 | 235hp | 173kw | 2007-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| TOYOTA | LAND CRUISER 200 (_J2_) | 1VD-FTV | Diesel | 4.5 | 265hp | 195kw | 2007-now |
| Important notes:Block Separation: ;Fitting Position: Left;Fitting Position: outer;Fitting Position: Right;Vehicle type: Land Cruiser 200;Vehicle type: Land Cruiser V8 | |||||||
| TOYOTA | LAND CRUISER 200 (_J2_) | 1VD-FTV | Diesel | 4.5 | 272hp | 200kw | 2012-now |
| Important notes:Block Separation: ;Fitting Position: Left;Fitting Position: outer;Fitting Position: Right;Vehicle type: Land Cruiser 200;Vehicle type: Land Cruiser V8 | |||||||
| TOYOTA | LAND CRUISER 200 (_J2_) | 1VD-FTV | Diesel | 4.5 | 286hp | 210kw | 2008-now |
| Important notes:Block Separation: ;Fitting Position: Left;Fitting Position: outer;Fitting Position: Right;Vehicle type: Land Cruiser 200;Vehicle type: Land Cruiser V8 | |||||||
| TOYOTA | LAND CRUISER 200 (_J2_) | 2UZ-FE | Petrol | 4.7 | 288hp | 212kw | 2008-now |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right;Vehicle type: Land Cruiser V8 | |||||||
| TOYOTA | LAND CRUISER PRADO (_J12_) | 1GR-FE | Petrol | 4.0 | 243hp | 179kw | 2002-2010 |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| TOYOTA | LAND CRUISER PRADO (_J12_) | 1KD-FTV | Diesel | 3.0 | 163hp | 120kw | 2002-2009 |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| TOYOTA | LAND CRUISER PRADO (_J12_) | 1KD-FTV | Diesel | 3.0 | 166hp | 122kw | 2004-2009 |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| TOYOTA | LAND CRUISER PRADO (_J12_) | 1KD-FTV | Diesel | 3.0 | 173hp | 127kw | 2002-2010 |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| TOYOTA | LAND CRUISER PRADO (_J12_) | 2TR-FE | Petrol | 2.7 | 163hp | 120kw | 2003-2010 |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
| TOYOTA | LAND CRUISER PRADO (_J12_) | 5L-E | Diesel | 3.0 | 95hp | 70kw | 2002-2010 |
| Important notes:Fitting Position: Left;Fitting Position: outer;Fitting Position: Right | |||||||
SIMILAR PRODUCTS FOR YOUR VEHICLE
Control Arm/Trailing Arm, wheel suspension
Art-Nr: 81943020
Fitting Position: Front Axle Left
Fitting Position: Lower
Weight [kg]: 7.3 kg
Cone Size [mm]: 20 mm
Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Supplementary Article/Info 2: with bearing(s)
Control/Trailing Arm Type: Control Arm
Material: Sheet Steel
External Thread Size: M16 x 1,5
paired article number: 33 10 7017
$62.75
no VAT req.
Available: 4
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Arm Sub-Assy, Front Suspension, Lower No.1 Rh
Art-Nr: 48068-60010
Category: FRONT AXLE ARM & STEERING KNUCKLE
Fitting Position: LOWER NO.1 RIGHT
$394.51
no VAT req.
Special Order
Handling time: About 30 business day(s)
Handling Time: About 30 business day(s)
?
The item should be shipped within 30 business day(s) of receiving cleared payment.
Add to wishlist
Arm Sub-Assy, Front Suspension, Lower No.1 Lh
Art-Nr: 48069-60010
Category: FRONT AXLE ARM & STEERING KNUCKLE
Fitting Position: LOWER NO.1 LEFT
$394.51
no VAT req.
Special Order
Handling time: About 30 business day(s)
Handling Time: About 30 business day(s)
?
The item should be shipped within 30 business day(s) of receiving cleared payment.
Add to wishlist
Control Arm/Trailing Arm, wheel suspension
Art-Nr: TC3297
Length [mm]: 445 mm
Height [mm]: 105 mm
Width [mm]: 430 mm
Control/Trailing Arm Type: Control Arm
Thread Size 1: M16x1.5
$121.86
no VAT req.
Available: 5
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Control Arm/Trailing Arm, wheel suspension
Art-Nr: TC3298
Length [mm]: 445 mm
Height [mm]: 105 mm
Width [mm]: 430 mm
Control/Trailing Arm Type: Control Arm
Thread Size 1: M16x1.5
$121.86
no VAT req.
Available: 5
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Control Arm/Trailing Arm, wheel suspension
Art-Nr: ADT386123
Weight [kg]: 7,350 kg
Fitting Position: Lower
Fitting Position: Front Axle Left
Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Supplementary Article/Info 2: with bearing(s)
Control/Trailing Arm Type: Control Arm
Material: Sheet Steel
Cone Size [mm]: 20 mm
External Thread Size: M16 x 1,5
paired article number: ADBP860024
$69.42
no VAT req.
Available: 4
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Track Control Arm
Art-Nr: 8500135027
Required quantity: 1
Cone Size [mm]: 17.4 mm
Supplementary Article/Info 2: with rubber mounting
Supplementary Article/Info 2: with ball joint
Steering arm type: Control Arm
$85.41
no VAT req.
Available: 10
Special Order
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
?
Handling time: About 30 business day(s)
Handling Time: About 30 business day(s)
The item should be shipped within 15 business day(s) of receiving cleared payment.
?
The item should be shipped within 30 business day(s) of receiving cleared payment.
Add to wishlist
Sleeve, control arm mounting
Art-Nr: 00673659
Quantity per Axle: 2
Fitting Position: Lower Front Axle
Fitting Position: Front
$5.93
no VAT req.
Available: 2
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
Sleeve, control arm mounting
Art-Nr: 00673664
Quantity per Axle: 2
Fitting Position: Rear
Fitting Position: Lower Front Axle
$7.61
no VAT req.
Available: 1
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
Ball Joint
Art-Nr: G3-1048
Required quantity: 2
Outer diameter [mm]: 47,3 mm
Fitting Position: Lower
Cone Size [mm]: 17,4 mm
External Thread [mm]: M16 x 1,50 RHT M mm
Supplementary Article/Info 2: with retaining ring
Control/Trailing Arm Type: for control arm
Fitting Position: Front Axle Right
Fitting Position: Front Axle Left
$25.40
no VAT req.
Available: 10+
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
ACKOJAP Ball Joint
Inner Tie Rod
Art-Nr: A26-1133
Fitting Position: Front Axle
External Thread 1 [mm]: M14 x 1,5 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$8.14
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Inner Tie Rod
Art-Nr: A32-1129
Length [mm]: 295 mm
Fitting Position: Front Axle both sides
External Thread [mm]: M14 x 1,5 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$14.34
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Inner Tie Rod
Art-Nr: A32-1131
Length [mm]: 160 mm
Fitting Position: Front Axle both sides
External Thread [mm]: M18x15,5 mm
External Thread 1 [mm]: M14x1,5 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$14.24
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Inner Tie Rod
Art-Nr: A37-1102
Colour: Grey
Length [mm]: 355 mm
Weight [kg]: 0.72 kg
Surface: Phosphatized
Material: Steel
Fitting Position: Front Axle both sides
External Thread [mm]: M14 x 1,5 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$12.71
no VAT req.
Available: 7
Available: 7
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Inner Tie Rod
Art-Nr: A37-1139
Weight [kg]: 0.523 kg
Length [mm]: 330 mm
Fitting Position: Front Axle
Thread Length [mm]: 19 mm
External Thread [mm]: M 12 x 1,25 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$11.26
no VAT req.
Available: 10
Available: 10
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Inner Tie Rod
Art-Nr: A37-1140
Thread Length [mm]: 56 mm
Weight [kg]: 0.68 kg
Length [mm]: 338 mm
Fitting Position: Front Axle
Fitting Position: Right
Fitting Position: Left
External Thread 1 [mm]: M14 x 1,5 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$12.06
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Ball Joint
Art-Nr: A38-1199
Cone Size [mm]: 16 mm
Fitting Position: Front Axle Right
Fitting Position: Front Axle Left
Fitting Position: Lower
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$12.99
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Inner Tie Rod
Art-Nr: A52-1178
Weight [kg]: 0.61 kg
Surface: Phosphatized
Material: Steel
Colour: Grey
Length [mm]: 243 mm
Fitting Position: Front Axle both sides
External Thread [mm]: M16 x 1,5 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$9.93
no VAT req.
Available: 10
Available: 10
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Tie Rod End
Art-Nr: A52-1219
Fitting Position: Front Axle
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$13.05
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Inner Tie Rod
Art-Nr: A53-0119
Fitting Position: Front Axle
Fitting Position: Left
External Thread 1 [mm]: M14 x 1,5 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$9.90
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
