$11.57
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
$11.57
Have questions about this item?
You can pay for your order using any of these types of cards: Visa, MasterCard; as well as through these payment systems: PayPal and Bank transfer. All orders need to be prepaid to start processing. The parts are not reserved until the payment is received.
We provide worldwide shipping, but some parts cannot be processed in an automatic way. In all those cases the manager will contact you and will offer special delivery.

Link/Coupling Rod, stabiliser bar

Art-Nr: A70-9660

ACKOJAP
Supplier: ACKOJAP
Link/Coupling Rod, stabiliser bar ACKOJAP A70-9660
Link/Coupling Rod, stabiliser bar ACKOJAP A70-9660 main

Product info

Fitting Position:
Front Axle
Additional Info:
In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
EAN:
4062375228287
Category:
Stabilizer-/Accessories
 
Stabiliser And Parts
Condition:
new
Item Number:
A709660
Brand
Code
ACKOJAP
A70-9660
BUCYRUS ERIE
50-03630
KING LONG
24386AP
TALOSA
50-03630
TOYOTA
48820-06090

ACKOJAP Stabiliser and parts

Mounting, stabiliser bar ACKOJAP A37-0139 ACKOJAP Mounting, stabiliser bar ACKOJAP Art-Nr: A37-0139 Required quantity: 2 Mounting Type: Rubber Bush Inner diameter [mm]: 23 mm Fitting Position: Front Axle both sides Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$3.44
no VAT req.
Available: 10 Available: 10 Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Link/Coupling Rod, stabiliser bar ACKOJAP A37-1150 ACKOJAP Link/Coupling Rod, stabiliser bar ACKOJAP Art-Nr: A37-1150 Rod/Strut: Coupling Rod Fitting Position: Front Axle Weight [kg]: 0.286 kg Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$9.66
no VAT req.
Available: 10+ Available: 10+ Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Mounting, stabiliser bar ACKOJAP A38-0238 ACKOJAP Mounting, stabiliser bar ACKOJAP Art-Nr: A38-0238 Inner diameter [mm]: 26 mm Required quantity: 2 Length [mm]: 50.8 mm Mounting Type: Rubber Bush Fitting Position: Front Axle both sides Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$4.66
no VAT req.
Available: 2 Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Mounting, stabiliser bar ACKOJAP A63-0023 ACKOJAP Mounting, stabiliser bar ACKOJAP Art-Nr: A63-0023 Inner diameter [mm]: 20 mm Required quantity: 2 Mounting Type: Rubber Bush Fitting Position: Front Axle both sides Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$4.18
no VAT req.
Available: 10+ Available: 10+ Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Mounting, stabiliser bar ACKOJAP A63-0024 ACKOJAP Mounting, stabiliser bar ACKOJAP Art-Nr: A63-0024 Required quantity: 2 Inner diameter [mm]: 15 mm Mounting Type: Rubber Bush Fitting Position: Rear Axle both sides Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$4.44
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Link/Coupling Rod, stabiliser bar ACKOJAP A63-0063 ACKOJAP Link/Coupling Rod, stabiliser bar ACKOJAP Art-Nr: A63-0063 Weight [kg]: 0.596 kg Length [mm]: 342 mm Rod/Strut: Suspension Rod Fitting Position: Rear Axle Right paired article number: A63-0064 Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$14.97
no VAT req.
Available: 10+ Available: 10+ Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Link/Coupling Rod, stabiliser bar ACKOJAP A70-0001 ACKOJAP Link/Coupling Rod, stabiliser bar ACKOJAP Art-Nr: A70-0001 Rod/Strut: Suspension Rod Fitting Position: Front Axle Right paired article number: A70-0002 Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$18.26
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Link/Coupling Rod, stabiliser bar ACKOJAP A70-0002 ACKOJAP Link/Coupling Rod, stabiliser bar ACKOJAP Art-Nr: A70-0002 Rod/Strut: Coupling Rod Fitting Position: Front Axle Left paired article number: A70-0001 Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$6.84
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Link/Coupling Rod, stabiliser bar ACKOJAP A70-0019 ACKOJAP Link/Coupling Rod, stabiliser bar ACKOJAP Art-Nr: A70-0019 Rod/Strut: Coupling Rod Outer diameter [mm]: 8.5 mm Spanner Size: 13 [mm] Spanner Size: 10 [mm] Length [mm]: 97.5 mm Thread Length [mm]: 13 mm Fitting Position: Front Axle External Thread [mm]: M 8 x 1,25 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$4.34
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Link/Coupling Rod, stabiliser bar ACKOJAP A70-0515 ACKOJAP Link/Coupling Rod, stabiliser bar ACKOJAP Art-Nr: A70-0515 Thread Size 2: M10x1,25 Thread Size 1: M10x1,25 Weight [kg]: 0.615 kg Length [mm]: 260 mm Rod/Strut: Suspension Rod Fitting Position: Rear Axle Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$26.01
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro