$8.18
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
$8.18
Have questions about this item?
You can pay for your order using any of these types of cards: Visa, MasterCard; as well as through these payment systems: PayPal and Bank transfer. All orders need to be prepaid to start processing. The parts are not reserved until the payment is received.
We provide worldwide shipping, but some parts cannot be processed in an automatic way. In all those cases the manager will contact you and will offer special delivery.

Tie Rod End

Art-Nr: A64-0520

ACKOJAP
Supplier: ACKOJAP
Tie Rod End ACKOJAP A64-0520
Tie Rod End ACKOJAP A64-0520 main

Product info

Fitting Position:
Front Axle
Additional Info:
In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
EAN:
4062375228102
Category:
Steering Joints
 
Track Rod/ Joints
 
Ball Joint
 
Tie Rod Assembly/ Parts
Condition:
new
Item Number:
A640520
Brand
Code
555
SE-7641
A.B.S.
230734
ACKOJAP
A64-0520
AISIN
JTRSZ-008
ASHIKA
111-08-800
ASVA
0721-JB
AYD
9109123
BGA
SR8514
BIRTH
RD4633
BLUE PRINT
ADK88730
BORG & BECK
BTR5475
CAUTEX
754912
COMLINE
CTRE4023
CORTECO
49401139
DELPHI
TA2493
DITAS
A2-5966
DODA
1130030093
FAI AutoParts
SS7820
FAST
FT16026
FEBEST
0721-SX4
FEBI BILSTEIN
42309
FIRST LINE
FTR5475
FORMPART
4302006
FRAP
F3110
GSP
S070613
HERTH+BUSS JAKOPARTS
J4828017
JAPANPARTS
TI-800
JAPKO
111800
KAMOKA
9010304
KAVO PARTS
STE-8510
KAWE
8500 69106
LEMFÖRDER
38301 01
LYNXauto
C4321LR
MAGNETI MARELLI
600000144210
MAPCO
52384
MASTER-SPORT GERMANY
42309B-PCS-MS
MASTER-SPORT GERMANY
42309B-SET-MS
MAXGEAR
69-0799
MDR
MTR-8800
METZGER
54018608
MEYLE
33-16 020 0001
MGA
DR5834
MONROE
L69106
MOOG
SZ-ES-7347
MOTAQUIP
VTR1231
Metalcaucho
53218
NIPPARTS
N4828017
NK
5035205
OCAP
0282839
OCAP
0282631
Omnicraft
2395971
PATRON
PS1208
PEMEBLA
JAPTI-800
PROFIT
2302-0558
RTS
91-08516
SIDEM
77333
STC
T453218
STELLOX
51-00174-SX
SUZUKI
48810-65J00
SWAG
84 94 2309
TALOSA
42-01446
TRISCAN
8500 69106
TRW
JTE7680
VEMA
26276
Brand Model Engine code Fuel Displacement HP KW Year
SUZUKIGRAND VITARA II (JT)F9QBDiesel1.9129hp95kw2005-2015
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKIGRAND VITARA II (JT)F9QBDiesel1.9129hp95kw2006-2008
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKIGRAND VITARA II (JT)F9QCDiesel1.9129hp95kw2005-2015
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKIGRAND VITARA II (JT)J20APetrol2.0135hp99kw2010-now
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKIGRAND VITARA II (JT)J20APetrol2.0137hp101kw2013-now
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKIGRAND VITARA II (JT)J20APetrol2.0140hp103kw2005-2015
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKIGRAND VITARA II (JT)J24BPetrol2.4166hp122kw2008-now
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKIGRAND VITARA II (JT)J24BPetrol2.4166hp122kw2009-now
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKIGRAND VITARA II (JT)J24BPetrol2.4169hp124kw2009-now
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKIGRAND VITARA II (JT)M16APetrol1.6105hp77kw2013-now
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKIGRAND VITARA II (JT)M16APetrol1.6106hp78kw2005-2015
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKIGRAND VITARA II (JT)M16APetrol1.6106hp78kw2005-now
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKIGRAND VITARA II (JT)M16APetrol1.699hp73kw2005-2015
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKIGRAND VITARA II (JT)N32APetrol3.2224hp165kw2008-2015
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKIGRAND VITARA II (JT)N32APetrol3.2233hp171kw2009-2015
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKIGRAND VITARA II (JT, TE, TD)F9QBDiesel1.9129hp95kw2005-2015
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKIGRAND VITARA II (JT, TE, TD)F9QBDiesel1.9129hp95kw2006-2008
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKIGRAND VITARA II (JT, TE, TD)F9QCDiesel1.9129hp95kw2005-2015
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKIGRAND VITARA II (JT, TE, TD)J20APetrol2.0135hp99kw2010-now
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKIGRAND VITARA II (JT, TE, TD)J20APetrol2.0137hp101kw2013-now
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKIGRAND VITARA II (JT, TE, TD)J20APetrol2.0140hp103kw2005-2015
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKIGRAND VITARA II (JT, TE, TD)J24BPetrol2.4166hp122kw2008-now
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKIGRAND VITARA II (JT, TE, TD)J24BPetrol2.4166hp122kw2009-now
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKIGRAND VITARA II (JT, TE, TD)J24BPetrol2.4169hp124kw2009-now
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKIGRAND VITARA II (JT, TE, TD)M16APetrol1.6105hp77kw2013-now
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKIGRAND VITARA II (JT, TE, TD)M16APetrol1.6106hp78kw2005-2015
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKIGRAND VITARA II (JT, TE, TD)M16APetrol1.6106hp78kw2005-now
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKIGRAND VITARA II (JT, TE, TD)M16APetrol1.699hp73kw2005-2015
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKIGRAND VITARA II (JT, TE, TD)N32APetrol3.2224hp165kw2008-2015
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKIGRAND VITARA II (JT, TE, TD)N32APetrol3.2233hp171kw2009-2015
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKISWIFT V (AZ)K10CPetrol/Electric1.0112hp82kw2017-now
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKISWIFT V (AZ)K10CPetrol1.0112hp82kw2017-now
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKISWIFT V (AZ)K12CPetrol1.290hp66kw2017-now
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKISWIFT V (AZ)K12CSPetrol/Electric1.290hp66kw2017-now
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKISWIFT V (AZ)K14CPetrol1.4140hp103kw2017-now
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKISX4 (EY, GY)9HXDiesel1.690hp66kw2007-now
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKISX4 (EY, GY)D19AADiesel1.9120hp88kw2006-now
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKISX4 (EY, GY)D20AADiesel2.0135hp99kw2009-now
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKISX4 (EY, GY)M15APetrol1.5112hp82kw2010-now
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKISX4 (EY, GY)M15APetrol1.599hp73kw2006-2010
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKISX4 (EY, GY)M16APetrol1.6107hp79kw2006-now
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKISX4 (EY, GY)M16APetrol1.6112hp82kw2009-now
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKISX4 (EY, GY)M16APetrol1.6112hp82kw2010-2015
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKISX4 (EY, GY)M16APetrol1.6120hp88kw2009-now
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKISX4 S-CROSS (JY)D16AADiesel1.6120hp88kw2013-now
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKISX4 S-CROSS (JY)K10CPetrol1.0112hp82kw2016-now
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKISX4 S-CROSS (JY)K14CPetrol1.4140hp103kw2016-now
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKISX4 S-CROSS (JY)M16APetrol1.6116hp85kw2013-now
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKISX4 S-CROSS (JY)M16APetrol1.6117hp86kw2013-now
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKISX4 S-CROSS (JY)M16APetrol1.6118hp87kw2014-now
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKISX4 S-CROSS (JY)M16APetrol1.6120hp88kw2013-now
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKISX4 Saloon (GY)M16APetrol1.6107hp79kw2007-now
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKISX4 Saloon (GY)M16APetrol1.6120hp88kw2007-now
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKISX4 Saloon (GY, RW)M16APetrol1.6107hp79kw2007-now
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKISX4 Saloon (GY, RW)M16APetrol1.6120hp88kw2007-now
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKIVITARA (LY)D16AADiesel1.6120hp88kw2015-now
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKIVITARA (LY)K10CPetrol1.0111hp82kw2018-now
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKIVITARA (LY)K14CPetrol1.4140hp103kw2015-now
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKIVITARA (LY)M16APetrol1.6116hp85kw2015-now
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKIVITARA (LY)M16APetrol1.6117hp86kw2015-now
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKIVITARA (LY)M16APetrol1.6120hp88kw2015-now
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer
SUZUKIVITARA (LY)M16APetrol1.6126hp93kw2016-now
Important notes:Fitting Position: Front Axle both sides;Fitting Position: outer

SIMILAR PRODUCTS FOR YOUR VEHICLE

Tie Rod End SWAG 84942309 SWAG Tie Rod End SWAG Art-Nr: 84942309 Spanner Size: 19 Length [mm]: 102 mm Weight [kg]: 0.36 kg Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Supplementary Article/Info 2: with nut Fitting Position: Front Axle Right Fitting Position: Front Axle Left External Thread Size: M12 x 1,25 Internal Thread Size: M14 x 1,5 Thickness [mm]: 76 mm
$9.40
no VAT req.
Available: 4 Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Tie Rod End METZGER 54018608 METZGER Tie Rod End METZGER Art-Nr: 54018608 Fitting Position: Front Axle Right Fitting Position: Front Axle Left Warranty: 3 years warranty or until 75,000km
$9.32
no VAT req.
Available: 10+ Special Order Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Handling time: About 30 business day(s) Handling Time: About 30 business day(s)
?
The item should be shipped within 30 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Tie Rod End FEBI BILSTEIN 42309 FEBI BILSTEIN Tie Rod End FEBI BILSTEIN Art-Nr: 42309 Length [mm]: 102 mm Spanner Size: 19 Weight [kg]: 0.36 kg Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Supplementary Article/Info 2: with nut Fitting Position: Front Axle Right Fitting Position: Front Axle Left External Thread Size: M12 x 1,25 Internal Thread Size: M14 x 1,5 Thickness [mm]: 76 mm
$9.99
no VAT req.
Available: 4 Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Tie Rod End DELPHI TA2493 DELPHI Tie Rod End DELPHI Art-Nr: TA2493 Thread Type: with right-hand thread Height [mm]: 70 mm Width [mm]: 37 mm Length [mm]: 103 mm Cone Size [mm]: 13 mm Thread Size: M14x1.5
$7.48
no VAT req.
Available: 5 Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Tie Rod End BLUE PRINT ADK88730 BLUE PRINT Tie Rod End BLUE PRINT Art-Nr: ADK88730 Weight [kg]: 0,360 kg Spanner Size: 19 Length [mm]: 102 mm Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Supplementary Article/Info 2: with nut Fitting Position: Front Axle Right Fitting Position: Front Axle Left External Thread Size: M12 x 1,25 Internal Thread Size: M14 x 1,5 Thickness [mm]: 76 mm
$9.47
no VAT req.
Available: 4 Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Tie Rod End OPTIMAL G1-1308 OPTIMAL Tie Rod End OPTIMAL Art-Nr: G1-1308 Length [mm]: 84 mm Cone Size [mm]: 13 mm Registration Type: TÜV/GS tested External Thread [mm]: M12 x 1,25 RHT M mm Internal Thread [mm]: M14 x 1,5 RHT F mm Fitting Position: Front Axle Right Fitting Position: Front Axle Left
$7.66
no VAT req.
Available: 10+ Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Tie Rod End JAPKO 111800 JAPKO Tie Rod End JAPKO Art-Nr: 111800 Inner thread [mm]: 14x1,5 mm Fitting Position: Front Axle Overall Length [mm]: 99 mm Outer thread [mm]: 12x1,25 mm Fitted Diameter [mm]: 13 mm Overall Height [mm]: 71 mm Thread Length [mm]: 53 mm
$7.43
no VAT req.
Available: 4 Handling time: About 2 business day(s) Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Tie Rod End FEBEST 0721SX4 FEBEST Tie Rod End FEBEST Art-Nr: 0721SX4 Weight [kg]: 0,383 kg Quantity: 3 Packaging width [cm]: 6,5 cm Packaging length [cm]: 10,3 cm Packaging height [cm]: 3,9 cm Fitting Position: Front Axle left and right
$7.43
no VAT req.
Available: 1 Handling time: About 2 business day(s) Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Tie Rod End MEYLE 33-160200001 MEYLE Tie Rod End MEYLE Art-Nr: 33-160200001 Thread Size 2: M14x1,5 Thread Size 1: M12x1,25 Length [mm]: 84 mm Fitting Position: Front Axle Right Fitting Position: Front Axle Left
$11.70
no VAT req.
Available: 10+ Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
no image NK Tie Rod End NK Art-Nr: 5035205 Thread Size: M14x1,5
$8.30
no VAT req.
Available: 6 Handling time: About 2 business day(s) Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro

ACKOJAP Ball Joint

Inner Tie Rod ACKOJAP A26-1133 ACKOJAP Inner Tie Rod ACKOJAP Art-Nr: A26-1133 Fitting Position: Front Axle External Thread 1 [mm]: M14 x 1,5 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$8.11
no VAT req.
Available: 10+ Available: 10+ Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Inner Tie Rod ACKOJAP A32-1129 ACKOJAP Inner Tie Rod ACKOJAP Art-Nr: A32-1129 Length [mm]: 295 mm Fitting Position: Front Axle both sides External Thread [mm]: M14 x 1,5 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$14.28
no VAT req.
Available: 10+ Available: 10+ Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Inner Tie Rod ACKOJAP A32-1131 ACKOJAP Inner Tie Rod ACKOJAP Art-Nr: A32-1131 Length [mm]: 160 mm Fitting Position: Front Axle both sides External Thread [mm]: M18x15,5 mm External Thread 1 [mm]: M14x1,5 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$14.18
no VAT req.
Available: 10+ Available: 10+ Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Inner Tie Rod ACKOJAP A37-1102 ACKOJAP Inner Tie Rod ACKOJAP Art-Nr: A37-1102 Colour: Grey Length [mm]: 355 mm Weight [kg]: 0.72 kg Surface: Phosphatized Material: Steel Fitting Position: Front Axle both sides External Thread [mm]: M14 x 1,5 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$12.66
no VAT req.
Available: 7 Available: 7 Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Inner Tie Rod ACKOJAP A37-1139 ACKOJAP Inner Tie Rod ACKOJAP Art-Nr: A37-1139 Weight [kg]: 0.523 kg Length [mm]: 330 mm Fitting Position: Front Axle Thread Length [mm]: 19 mm External Thread [mm]: M 12 x 1,25 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$11.21
no VAT req.
Available: 10 Available: 10 Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Inner Tie Rod ACKOJAP A37-1140 ACKOJAP Inner Tie Rod ACKOJAP Art-Nr: A37-1140 Thread Length [mm]: 56 mm Weight [kg]: 0.68 kg Length [mm]: 338 mm Fitting Position: Front Axle Fitting Position: Right Fitting Position: Left External Thread 1 [mm]: M14 x 1,5 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$12.02
no VAT req.
Available: 10+ Available: 10+ Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Ball Joint ACKOJAP A38-1199 ACKOJAP Ball Joint ACKOJAP Art-Nr: A38-1199 Cone Size [mm]: 16 mm Fitting Position: Front Axle Right Fitting Position: Front Axle Left Fitting Position: Lower Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$12.94
no VAT req.
Available: 10+ Available: 10+ Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Inner Tie Rod ACKOJAP A52-1178 ACKOJAP Inner Tie Rod ACKOJAP Art-Nr: A52-1178 Weight [kg]: 0.61 kg Surface: Phosphatized Material: Steel Colour: Grey Length [mm]: 243 mm Fitting Position: Front Axle both sides External Thread [mm]: M16 x 1,5 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$9.89
no VAT req.
Available: 10 Available: 10 Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Tie Rod End ACKOJAP A52-1219 ACKOJAP Tie Rod End ACKOJAP Art-Nr: A52-1219 Fitting Position: Front Axle Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$12.99
no VAT req.
Available: 10+ Available: 10+ Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Inner Tie Rod ACKOJAP A53-0119 ACKOJAP Inner Tie Rod ACKOJAP Art-Nr: A53-0119 Fitting Position: Front Axle Fitting Position: Left External Thread 1 [mm]: M14 x 1,5 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$9.86
no VAT req.
Available: 10+ Available: 10+ Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro