$9.29
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
$9.29
Have questions about this item?
You can pay for your order using any of these types of cards: Visa, MasterCard; as well as through these payment systems: PayPal and Bank transfer. All orders need to be prepaid to start processing. The parts are not reserved until the payment is received.
We provide worldwide shipping, but some parts cannot be processed in an automatic way. In all those cases the manager will contact you and will offer special delivery.
Ball Joint
Art-Nr: A53-9605
Supplier:
ACKOJAP
Product info
Fitting Position:
Lower
Front Axle
Additional Info:
In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
EAN:
4062375228041
Category:
Ball Joint
Condition:
new
Item Number:
A539605
Brand
Code
555
SBK-8522
A.B.S.
220537
ACKOJAP
A53-9605
AISIN
JBJKA-002
ASHIKA
73-0K-K06
ASVA
1220-AM
AYD
9210517
BGA
SJ2710
BIRTH
CX9247
BLUE PRINT
ADG086324
BORG & BECK
BBJ5646
BSG
BSG 40-310-061
CAUTEX
755074
COMLINE
CBJ7152
CORTECO
49395961
DELPHI
TC3404
FAG
825 0427 10
FAI AutoParts
SS8305
FEBEST
2220-SOULF
FEBI BILSTEIN
41853
FINWHALE
BJ512
FIRST LINE
FBJ5646
FLENNOR
FL10535-D
FORMPART
4903003
FRAP
F4490
GSP
S080507
HERTH+BUSS JAKOPARTS
J4860320
JAPANPARTS
BJ-K06
JAPKO
73K06
JP GROUP
3640300400
KAMOKA
9040194
KAVO PARTS
SBJ-4017
KAWE
8500 18537
KIA
54530-2K-000
KYB
KBJ1184
LYNXauto
C1349LR
MAGNETI MARELLI
600000148440
MAPCO
52373
MAXGEAR
72-2824
MDR
MBJ-8K06
METZGER
57029118
MEYLE
28-16 010 0011/HD
MEYLE
28-16 010 0010
MGA
SR5976
MONROE
L18537
MOOG
KI-BJ-12659
MOTAQUIP
LVSJ1240
Metalcaucho
53209
NIPPARTS
N4860315
NK
5043511
NPS
K420A44
OCAP
0408094
OPTIMAL
G3-2038
OSSCA
35709
PATRON
PS3189
PEMEBLA
JAPBJ-K06
QUINTON HAZELL
QSJ3672S
RTS
93-08810
SASIC
7576043
SIDEM
81184
SKF
VKDS 815005
STC
T453209
STELLOX
52-00236-SX
SWAG
91 94 1853
SpeedMate
SM-BJK018
TALOSA
47-03714
TOPRAN
820 877
TRISCAN
8500 18537
TRW
JBJ1099
VEMA
26993
WILMINK GROUP
WG2039341
YAMATO
J10315YMT
ZEKKERT
TG-5304
| Brand | Model | Engine code | Fuel | Displacement | HP | KW | Year |
| HYUNDAI | i10 II (BA, IA) | B3LA | Petrol/Liquified Petroleum Gas (LPG) | 1.0 | 67hp | 49kw | 2014-now |
| HYUNDAI | i10 II (BA, IA) | B3LA | Petrol/Liquified Petroleum Gas (LPG) | 1.0 | 69hp | 51kw | 2014-2016 |
| HYUNDAI | i10 II (BA, IA) | D3FA | Diesel | 1.1 | 71hp | 52kw | 2013-now |
| HYUNDAI | i10 II (BA, IA) | G3LA | Petrol | 1.0 | 67hp | 49kw | 2013-now |
| HYUNDAI | i10 II (BA, IA) | G4AG | Petrol | 1.2 | 82hp | 60kw | 2013-now |
| HYUNDAI | i10 II (BA, IA) | G4AG | Petrol | 1.2 | 83hp | 61kw | 2018-now |
| HYUNDAI | i10 II (BA, IA) | G4LA | Petrol | 1.2 | 87hp | 64kw | 2013-now |
| HYUNDAI | i10 II Saloon | D3FA | Diesel | 1.1 | 72hp | 53kw | 2014-2017 |
| HYUNDAI | i10 II Saloon | G4AG | Petrol | 1.2 | 83hp | 61kw | 2013-now |
| HYUNDAI | i10 II Saloon | G4LA | Petrol | 1.2 | 87hp | 64kw | 2015-now |
| KIA | PICANTO (TA) | B3LA | Petrol/Liquified Petroleum Gas (LPG) | 1.0 | 67hp | 49kw | 2013-2017 |
| KIA | PICANTO (TA) | B3LA | Petrol/Liquified Petroleum Gas (LPG) | 1.0 | 82hp | 60kw | 2011-2014 |
| KIA | PICANTO (TA) | G3LA | Petrol | 1.0 | 67hp | 49kw | 2011-2017 |
| KIA | PICANTO (TA) | G3LA | Petrol | 1.0 | 69hp | 51kw | 2011-2017 |
| KIA | PICANTO (TA) | G4LA | Petrol | 1.2 | 85hp | 63kw | 2011-2017 |
| KIA | PICANTO (TA) | G4LA | Petrol | 1.2 | 87hp | 64kw | 2011-2017 |
| KIA | PICANTO II (TA) | B3LA | Petrol/Liquified Petroleum Gas (LPG) | 1.0 | 67hp | 49kw | 2013-2017 |
| KIA | PICANTO II (TA) | B3LA | Petrol/Liquified Petroleum Gas (LPG) | 1.0 | 82hp | 60kw | 2011-2014 |
| KIA | PICANTO II (TA) | G3LA | Petrol | 1.0 | 67hp | 49kw | 2011-2017 |
| KIA | PICANTO II (TA) | G3LA | Petrol | 1.0 | 69hp | 51kw | 2011-2017 |
| KIA | PICANTO II (TA) | G4LA | Petrol | 1.2 | 85hp | 63kw | 2011-2017 |
| KIA | PICANTO II (TA) | G4LA | Petrol | 1.2 | 87hp | 64kw | 2011-2017 |
| KIA | RIO III (UB) | D3FA | Diesel | 1.1 | 75hp | 55kw | 2011-2017 |
| KIA | RIO III (UB) | D4FC | Diesel | 1.4 | 90hp | 66kw | 2011-2017 |
| KIA | RIO III (UB) | G4FA | Petrol | 1.4 | 107hp | 79kw | 2011-2017 |
| KIA | RIO III (UB) | G4FA | Petrol | 1.4 | 109hp | 80kw | 2011-2017 |
| KIA | RIO III (UB) | G4FC | Petrol | 1.6 | 123hp | 90kw | 2012-2017 |
| KIA | RIO III (UB) | G4LA | Petrol/Liquified Petroleum Gas (LPG) | 1.25 | 86hp | 63kw | 2011-2017 |
| KIA | RIO III (UB) | G4LA | Petrol | 1.25 | 86hp | 63kw | 2011-2017 |
| KIA | RIO III (UB) | G4LA | Petrol | 1.25 | 87hp | 64kw | 2014-2017 |
| KIA | RIO III (UB) | G4LA | Petrol | 1.25 | 88hp | 65kw | 2011-2017 |
| KIA | RIO III (UB) | G4LA | Petrol | 1.2 | 69hp | 51kw | 2011-2017 |
| KIA | RIO III (UB) | G4LA | Petrol | 1.2 | 84hp | 62kw | 2014-2017 |
| KIA | RIO III Hatchback Van (UB) | D3FA | Diesel | 1.1 | 75hp | 55kw | 2011-now |
| KIA | RIO III Hatchback Van (UB) | D4FC | Diesel | 1.4 | 90hp | 66kw | 2015-now |
| KIA | RIO III Hatchback Van (UB) | G4FA | Petrol | 1.4 | 109hp | 80kw | 2015-now |
| KIA | RIO III Hatchback Van (UB) | G4LA | Petrol | 1.2 | 86hp | 63kw | 2015-2017 |
| KIA | RIO III Saloon (UB) | G4FA | Petrol | 1.4 | 107hp | 79kw | 2011-2017 |
| KIA | RIO III Saloon (UB) | G4FA | Petrol | 1.4 | 109hp | 80kw | 2011-2017 |
| KIA | RIO III Saloon (UB) | G4FC | Petrol | 1.6 | 123hp | 90kw | 2012-2017 |
| KIA | RIO III Saloon (UB) | G4LA | Petrol | 1.25 | 83hp | 61kw | 2015-2017 |
| KIA | RIO III Saloon (UB) | G4LA | Petrol | 1.25 | 86hp | 63kw | 2011-2017 |
| KIA | RIO III Saloon (UB) | G4LA | Petrol | 1.2 | 87hp | 64kw | 2014-2017 |
| KIA | SOUL I (AM) | D4FB | Diesel | 1.6 | 115hp | 85kw | 2009-2014 |
| KIA | SOUL I (AM) | D4FB | Diesel | 1.6 | 126hp | 94kw | 2009-2014 |
| KIA | SOUL I (AM) | G4FC | Petrol/Liquified Petroleum Gas (LPG) | 1.6 | 118hp | 87kw | 2011-2014 |
| KIA | SOUL I (AM) | G4FC | Petrol/Liquified Petroleum Gas (LPG) | 1.6 | 125hp | 92kw | 2009-2011 |
| KIA | SOUL I (AM) | G4FC | Petrol | 1.6 | 105hp | 77kw | 2009-2011 |
| KIA | SOUL I (AM) | G4FC | Petrol | 1.6 | 124hp | 91kw | 2009-2014 |
| KIA | SOUL I (AM) | G4FC | Petrol | 1.6 | 126hp | 93kw | 2009-2011 |
| KIA | SOUL I (AM) | G4FC | Petrol | 1.6 | 129hp | 95kw | 2011-2014 |
| KIA | SOUL I (AM) | G4FD | Petrol | 1.6 | 140hp | 103kw | 2011-2014 |
| KIA | SOUL I (AM) | G4GC | Petrol | 2.0 | 144hp | 106kw | 2009-2011 |
SIMILAR PRODUCTS FOR YOUR VEHICLE
Ball Joint
Art-Nr: 91941853
Fitting Position: Lower
Weight [kg]: 0.33 kg
Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Supplementary Article/Info 2: with retaining ring
Fitting Position: Front Axle Right
Fitting Position: Front Axle Left
Control/Trailing Arm Type: Control Arm
Cone Size [mm]: 18 mm
$12.73
no VAT req.
Available: 6
Available: 6
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Ball Joint
Art-Nr: 3640300400
Fitting Position: Lower
Fitting Position: Front Axle Right
Fitting Position: Front Axle Left
$7.92
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Ball Joint
Art-Nr: 57029118
Fitting Position: Front Axle Right
Fitting Position: Front Axle Left
Warranty: 3 years warranty or until 75,000km
$9.27
no VAT req.
Available: 10+
Special Order
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
?
Handling time: About 30 business day(s)
Handling Time: About 30 business day(s)
The item should be shipped within 15 business day(s) of receiving cleared payment.
?
The item should be shipped within 30 business day(s) of receiving cleared payment.
Add to wishlist
Ball Joint
Art-Nr: 41853
Fitting Position: Lower
Weight [kg]: 0.33 kg
Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Supplementary Article/Info 2: with retaining ring
Fitting Position: Front Axle Right
Fitting Position: Front Axle Left
Control/Trailing Arm Type: Control Arm
Cone Size [mm]: 18 mm
$13.52
no VAT req.
Available: 4
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Ball Joint
Art-Nr: TC3404
Length [mm]: 46 mm
Height [mm]: 74 mm
Thread Size: Pinch Bolt 18mm
Width [mm]: 46 mm
$10.77
no VAT req.
Available: 5
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Ball Joint
Art-Nr: ADG086324
Fitting Position: Lower
Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
for OE number: 54530-2K000
Supplementary Article/Info 2: with retaining ring
Weight [kg]: 0,33 kg
Fitting Position: Front Axle Right
Fitting Position: Front Axle Left
Control/Trailing Arm Type: Control Arm
Cone Size [mm]: 18 mm
$9.08
no VAT req.
Available: 4
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Ball Joint
Art-Nr: 850018537
Cone Size [mm]: 18 mm
Required quantity: 2
$13.98
no VAT req.
Available: 10+
Special Order
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
?
Handling time: About 30 business day(s)
Handling Time: About 30 business day(s)
The item should be shipped within 15 business day(s) of receiving cleared payment.
?
The item should be shipped within 30 business day(s) of receiving cleared payment.
Add to wishlist
Fastening Bolt, control arm
Art-Nr: 301191618730
Control/Trailing Arm Type: Control Arm
Fitting Position: Front Axle
$8.67
no VAT req.
Available: 5
Special Order
Handling time: About 10 business day(s)
Handling Time: About 10 business day(s)
?
Handling time: About 30 business day(s)
Handling Time: About 30 business day(s)
The item should be shipped within 10 business day(s) of receiving cleared payment.
?
The item should be shipped within 30 business day(s) of receiving cleared payment.
Add to wishlist
Ball Joint
Art-Nr: VKDS815005
$8.82
no VAT req.
Available: 1
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
Ball Joint
Art-Nr: 73K06
Fitting Position: Lower Front Axle
Outer diameter [mm]: 40 mm
Fitted Diameter [mm]: 18 mm
Overall Height [mm]: 76 mm
$6.78
no VAT req.
Available: 4
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
ACKOJAP Ball Joint
Inner Tie Rod
Art-Nr: A26-1133
Fitting Position: Front Axle
External Thread 1 [mm]: M14 x 1,5 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$7.96
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Inner Tie Rod
Art-Nr: A32-1129
Length [mm]: 295 mm
Fitting Position: Front Axle both sides
External Thread [mm]: M14 x 1,5 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$14.03
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Inner Tie Rod
Art-Nr: A32-1131
Length [mm]: 160 mm
Fitting Position: Front Axle both sides
External Thread [mm]: M18x15,5 mm
External Thread 1 [mm]: M14x1,5 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$13.93
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Inner Tie Rod
Art-Nr: A37-1102
Colour: Grey
Length [mm]: 355 mm
Weight [kg]: 0.72 kg
Surface: Phosphatized
Material: Steel
Fitting Position: Front Axle both sides
External Thread [mm]: M14 x 1,5 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$12.44
no VAT req.
Available: 7
Available: 7
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Inner Tie Rod
Art-Nr: A37-1139
Weight [kg]: 0.523 kg
Length [mm]: 330 mm
Fitting Position: Front Axle
Thread Length [mm]: 19 mm
External Thread [mm]: M 12 x 1,25 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$11.01
no VAT req.
Available: 10
Available: 10
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Inner Tie Rod
Art-Nr: A37-1140
Thread Length [mm]: 56 mm
Weight [kg]: 0.68 kg
Length [mm]: 338 mm
Fitting Position: Front Axle
Fitting Position: Right
Fitting Position: Left
External Thread 1 [mm]: M14 x 1,5 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$11.80
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Ball Joint
Art-Nr: A38-1199
Cone Size [mm]: 16 mm
Fitting Position: Front Axle Right
Fitting Position: Front Axle Left
Fitting Position: Lower
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$12.71
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Inner Tie Rod
Art-Nr: A52-1178
Weight [kg]: 0.61 kg
Surface: Phosphatized
Material: Steel
Colour: Grey
Length [mm]: 243 mm
Fitting Position: Front Axle both sides
External Thread [mm]: M16 x 1,5 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$9.72
no VAT req.
Available: 10
Available: 10
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Tie Rod End
Art-Nr: A52-1219
Fitting Position: Front Axle
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$12.76
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Inner Tie Rod
Art-Nr: A53-0119
Fitting Position: Front Axle
Fitting Position: Left
External Thread 1 [mm]: M14 x 1,5 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$9.68
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
