$9.70
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
$9.70
Have questions about this item?
You can pay for your order using any of these types of cards: Visa, MasterCard; as well as through these payment systems: PayPal and Bank transfer. All orders need to be prepaid to start processing. The parts are not reserved until the payment is received.
We provide worldwide shipping, but some parts cannot be processed in an automatic way. In all those cases the manager will contact you and will offer special delivery.
Inner Tie Rod
Art-Nr: A53-0119
Supplier:
ACKOJAP
Product info
Fitting Position:
Front Axle
Left
External Thread 1 [mm]:
M14 x 1,5 mm
Additional Info:
In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
EAN:
4062375093892
Category:
Ball Joint
Steering Joints
Tie Rod Assembly/ Parts
Track Rod/ Joints
Condition:
new
Item Number:
A530119
Brand
Code
4u
KI-E-20331
A.B.S.
240562
ACKOJAP
A53-0119
AISIN
JAJKI-004
ASHIKA
103-0K-K10L
AYD
9505752
AYD
9504966
BGA
SR3618
BIRTH
AX6982
BLUE PRINT
ADG087142
BORG & BECK
BTR5086
BSG
BSG 40-310-100
COMLINE
CTR2152
CORTECO
49397047
DAYCO
DSS2776
DELPHI
TA2052
DELPHI
TA2053
DJ PARTS
DR1155
FAG
840 0133 10
FAI AutoParts
SS2283
FEBI BILSTEIN
41914
FIRST LINE
FTR5086
FLENNOR
FL0973-C
FORMPART
4907009
FRAP
F3533
G.U.D.
GSP101287
HERTH+BUSS JAKOPARTS
J4840316
JAPANPARTS
RD-K10L
JAPKO
103K10L
JP GROUP
3644500170
KAMOKA
9981112
KAVO PARTS
STR-4008
KAWE
8500 18204
KIA
577313E010
KIA
57732-3E010
LEMFÖRDER
34334 01
LYNXauto
C2172L
MAGNETI MARELLI
600000145520
MAPCO
52550
MDR
MRE-8K10
MEYLE
28-16 031 0025/HD
MEYLE
28-16 031 0000
MONROE
L18204
MOOG
KI-AX-4409
MOTAQUIP
LVTR1470
NIPPARTS
J4840314
NK
5033507
NPS
K410A23
OCAP
0692471
OPTIMAL
G2-1084
PATRON
PS4429L
PEMEBLA
JAPRD-K10L
QUINTON HAZELL
QR3416S
RUVILLE
918934
SIDEM
81112
SKF
VKDY 825039
STELLOX
55-53010A-SX
STELLOX
55-53010-SX
SWAG
91 94 1914
TALOSA
44-01427
TOPRAN
821 342
TRISCAN
8500 18204
TRW
JAR7596
VAICO
V53-0119
VEMA
23369
sbs
19065033507
| Brand | Model | Engine code | Fuel | Displacement | HP | KW | Year |
| KIA | SORENTO I (JC) | D4CB | Diesel | 2.5 | 140hp | 103kw | 2002-2011 |
| KIA | SORENTO I (JC) | D4CB | Diesel | 2.5 | 163hp | 120kw | 2006-2011 |
| KIA | SORENTO I (JC) | D4CB | Diesel | 2.5 | 170hp | 125kw | 2006-2011 |
| KIA | SORENTO I (JC) | D4CB | Diesel | 2.5 | 178hp | 131kw | 2006-2011 |
| KIA | SORENTO I (JC) | G4JS | Petrol | 2.4 | 139hp | 102kw | 2002-2009 |
| KIA | SORENTO I (JC) | G6AU | Petrol | 3.5 | 194hp | 143kw | 2002-2006 |
| KIA | SORENTO I (JC) | G6CU | Petrol | 3.5 | 194hp | 143kw | 2002-2011 |
| KIA | SORENTO I (JC) | G6DA | Petrol | 3.8 | 266hp | 196kw | 2006-2011 |
| KIA | SORENTO I (JC) | G6DB | Petrol | 3.3 | 245hp | 180kw | 2008-2009 |
| KIA | SORENTO I (JC) | G6DB | Petrol | 3.3 | 248hp | 182kw | 2007-2011 |
| KIA | SORENTO I VAN (JC) | D4CB | Diesel | 2.5 | 140hp | 103kw | 2005-2006 |
SIMILAR PRODUCTS FOR YOUR VEHICLE
Inner Tie Rod
Art-Nr: 91941914
Fitting Position: Front Axle Left
Length [mm]: 165 mm
Weight [kg]: 0.554 kg
Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Supplementary Article/Supplementary Info: with lock nut
External Thread Size: M18 x 1,5
External Thread Size: M14 x 1,5
paired article number: 91 94 1915
$12.16
no VAT req.
Available: 4
Handling time: About 10 business day(s)
Handling Time: About 10 business day(s)
?
The item should be shipped within 10 business day(s) of receiving cleared payment.
Add to wishlist
Inner Tie Rod
Art-Nr: 91941915
Fitting Position: Front Axle Right
Length [mm]: 166 mm
Weight [kg]: 0.44 kg
Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Supplementary Article/Supplementary Info: with lock nut
External Thread Size: M18 x 1,5
External Thread Size: M14 x 1,5
paired article number: 91 94 1914
$12.16
no VAT req.
Available: 4
Handling time: About 10 business day(s)
Handling Time: About 10 business day(s)
?
The item should be shipped within 10 business day(s) of receiving cleared payment.
Add to wishlist
Inner Tie Rod
Art-Nr: 41914
Length [mm]: 165 mm
Fitting Position: Front Axle Left
Weight [kg]: 0.554 kg
Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Supplementary Article/Supplementary Info: with lock nut
External Thread Size: M18 x 1,5
External Thread Size: M14 x 1,5
paired article number: 41915
$12.91
no VAT req.
Available: 4
Handling time: About 10 business day(s)
Handling Time: About 10 business day(s)
?
The item should be shipped within 10 business day(s) of receiving cleared payment.
Add to wishlist
Inner Tie Rod
Art-Nr: 41915
Length [mm]: 166 mm
Fitting Position: Front Axle Right
Weight [kg]: 0.44 kg
Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Supplementary Article/Supplementary Info: with lock nut
External Thread Size: M18 x 1,5
External Thread Size: M14 x 1,5
paired article number: 41914
$12.91
no VAT req.
Available: 4
Handling time: About 10 business day(s)
Handling Time: About 10 business day(s)
?
The item should be shipped within 10 business day(s) of receiving cleared payment.
Add to wishlist
Inner Tie Rod
Art-Nr: TA2053
$11.80
no VAT req.
Available: 5
Handling time: About 10 business day(s)
Handling Time: About 10 business day(s)
?
The item should be shipped within 10 business day(s) of receiving cleared payment.
Add to wishlist
Inner Tie Rod
Art-Nr: TA2052
Dimensions: 211x98x62mm
Additional Info: Kia
Additional Info: Sorento JC
Height [mm]: 40 mm
Width [mm]: 40 mm
Length [mm]: 190 mm
Thread Size 2: M18x1.5
Thread Size 1: M14x1.5
$12.39
no VAT req.
Available: 5
Handling time: About 10 business day(s)
Handling Time: About 10 business day(s)
?
The item should be shipped within 10 business day(s) of receiving cleared payment.
Add to wishlist
Inner Tie Rod
Art-Nr: ADG087142
Weight [kg]: 0,440 kg
Fitting Position: Front Axle Left
Length [mm]: 165 mm
Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Supplementary Article/Supplementary Info: with lock nut
External Thread Size: M18 x 1,5
External Thread Size: M14 x 1,5
paired article number: ADG087143
$12.56
no VAT req.
Available: 4
Handling time: About 10 business day(s)
Handling Time: About 10 business day(s)
?
The item should be shipped within 10 business day(s) of receiving cleared payment.
Add to wishlist
Inner Tie Rod
Art-Nr: ADG087143
Weight [kg]: 0,450 kg
Fitting Position: Front Axle Right
Length [mm]: 166 mm
Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Supplementary Article/Supplementary Info: with lock nut
External Thread Size: M18 x 1,5
External Thread Size: M14 x 1,5
paired article number: ADG087142
$12.47
no VAT req.
Available: 4
Handling time: About 10 business day(s)
Handling Time: About 10 business day(s)
?
The item should be shipped within 10 business day(s) of receiving cleared payment.
Add to wishlist
Inner Tie Rod
Art-Nr: 850018203
Thread Size: M14x1,5/M18x1,5
$14.37
no VAT req.
Available: 10+
Special Order
Handling time: About 10 business day(s)
Handling Time: About 10 business day(s)
?
Handling time: About 30 business day(s)
Handling Time: About 30 business day(s)
The item should be shipped within 10 business day(s) of receiving cleared payment.
?
The item should be shipped within 30 business day(s) of receiving cleared payment.
Add to wishlist
Inner Tie Rod
Art-Nr: 850018204
Internal Thread [mm]: M14x1,5/m18x1,5 mm
$14.37
no VAT req.
Available: 3
Special Order
Handling time: About 10 business day(s)
Handling Time: About 10 business day(s)
?
Handling time: About 30 business day(s)
Handling Time: About 30 business day(s)
The item should be shipped within 10 business day(s) of receiving cleared payment.
?
The item should be shipped within 30 business day(s) of receiving cleared payment.
Add to wishlist
ACKOJAP Ball Joint
Inner Tie Rod
Art-Nr: A26-1133
Fitting Position: Front Axle
External Thread 1 [mm]: M14 x 1,5 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$7.98
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Inner Tie Rod
Art-Nr: A32-1129
Length [mm]: 295 mm
Fitting Position: Front Axle both sides
External Thread [mm]: M14 x 1,5 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$8.04
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Inner Tie Rod
Art-Nr: A32-1131
Length [mm]: 160 mm
Fitting Position: Front Axle both sides
External Thread [mm]: M18x15,5 mm
External Thread 1 [mm]: M14x1,5 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$13.95
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Inner Tie Rod
Art-Nr: A37-0131
Weight [kg]: 0.65 kg
Fitting Position: Front Axle both sides
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$11.27
no VAT req.
Available: 6
Available: 6
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Inner Tie Rod
Art-Nr: A37-1102
Colour: Grey
Length [mm]: 355 mm
Weight [kg]: 0.72 kg
Surface: Phosphatized
Material: Steel
Fitting Position: Front Axle both sides
External Thread [mm]: M14 x 1,5 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$13.02
no VAT req.
Available: 7
Available: 7
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Inner Tie Rod
Art-Nr: A37-1139
Weight [kg]: 0.523 kg
Length [mm]: 330 mm
Fitting Position: Front Axle
Thread Length [mm]: 19 mm
External Thread [mm]: M 12 x 1,25 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$10.77
no VAT req.
Available: 10
Available: 10
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Inner Tie Rod
Art-Nr: A37-1140
Thread Length [mm]: 56 mm
Weight [kg]: 0.68 kg
Length [mm]: 338 mm
Fitting Position: Front Axle
Fitting Position: Right
Fitting Position: Left
External Thread 1 [mm]: M14 x 1,5 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$11.82
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Ball Joint
Art-Nr: A38-1199
Cone Size [mm]: 16 mm
Fitting Position: Front Axle Right
Fitting Position: Front Axle Left
Fitting Position: Lower
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$12.83
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Inner Tie Rod
Art-Nr: A52-1178
Weight [kg]: 0.61 kg
Surface: Phosphatized
Material: Steel
Colour: Grey
Length [mm]: 243 mm
Fitting Position: Front Axle both sides
External Thread [mm]: M16 x 1,5 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$10.20
no VAT req.
Available: 10
Available: 10
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Tie Rod End
Art-Nr: A52-1219
Fitting Position: Front Axle
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$12.44
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
