Temporarily unavailable
Have questions about this item?
$0.00
Have questions about this item?
You can pay for your order using any of these types of cards: Visa, MasterCard; as well as through these payment systems: PayPal and Bank transfer. All orders need to be prepaid to start processing. The parts are not reserved until the payment is received.
We provide worldwide shipping, but some parts cannot be processed in an automatic way. In all those cases the manager will contact you and will offer special delivery.
Brake Disc
Art-Nr: A52-40021
Supplier:
ACKOJAP
Product info
Rim Hole Number:
4 -Hole
Outer diameter [mm]:
256 mm
Minimum thickness [mm]:
16 mm
Height [mm]:
46,9 mm
Centering Diameter [mm]:
62,2 mm
Brake Disc Type:
Vented
Brake Disc Thickness [mm]:
18 mm
Brake Disc Hub Height [mm]:
28,9 mm
Bolt Hole Circle Ø [mm]:
100 mm
EAN:
4062375261680
Category:
Brake Disc
Condition:
new
Item Number:
A5240021
Brand
Code
A.B.S.
09.B594.10
A.B.S.
18024
ABE
C30532ABE
ACKOJAP
A52-40021
AKRON-MALÒ
1110740
AP
25419
APEC
DSK2846
ASHIKA
60-0H-H26C
ASHIKA
60-0H-H26
ASHUKI by Palidium
Y089-52
ATE
24.0118-0151.1
BENDIX Braking
BDI1687
BLUE PRINT
ADG043152
BORG & BECK
BBD4822
BOSCH
0 986 479 577
BRAXIS
AE0308
BRECO
BS 9029
BREMBO
09.B594.10
BREMSI
CD7840V
BSF
11777V
BSG
BSG 40-210-020
Brake ENGINEERING
DI956886
CAR
142.1628
CHAMPION
562796CH
CIFAM
800-1265C
COMLINE
AND6571
COMLINE
ADC2402V
DELPHI
BG4535
DENCKERMANN
B130524
DJ PARTS
BD2143
DON
PCD14522
DYNAMATRIX
DBD1840
E.T.F.
19-1553
EUROBRAKE
5815313438
EUROBRAKE
5815203438
FEBI BILSTEIN
108426
FERODO
DDF1840C
FERODO
DDF1840
FREMAX
BD-5077
FTE
BS7529
GIRLING
6064311
HELLA
8DD 355 116-561
HELLA PAGID
8DD 355 116-561
HERTH+BUSS JAKOPARTS
J3300545
HYUNDAI
51712-1J500
JAPANPARTS
DI-H26C
JAPANPARTS
DI-H26
JAPKO
60H26
JAPKO
60H26C
JURATEK
HYU142
JURID
562796JC
KAISHIN
CBR532
KAMOKA
103209
KAVO PARTS
BR-3272-C
KAWE
61424 10
LPR
H2023V
LYNXauto
BN-1555
MAGNETI MARELLI
360406114000
MASTER-SPORT GERMANY
24011801511-PCS-MS
MAXGEAR
19-3191
MDR
MFD-2H26
METELLI
23-1265C
METZGER
6110544
MEYLE
37-15 521 0045/PD
MGA
D1925
MINTEX
MDC2126
MOTAQUIP
LVBD1638
NATIONAL
NBD1687
NIPPARTS
N3300542
NISSHINBO
ND6080K
NK
313438
NK
203438
NPS
H330I39
OPEN PARTS
BDA2601.20
OPTIMAL
BS-8294
OPTIMAL
BS-8294C
PAGID
55049
PEMEBLA
JAPDI-H26
PILENGA
V709
PROTECHNIC
PRD2848
QUARO
QD2800
QUINTON HAZELL
BDC6088
RAICAM
RD01212
REMSA
61424.10
ROADHOUSE
61424.10
ROTINGER
RT 21123-GL T3
ROTINGER
RT 21123-GL
ROTINGER
RT 21123-GL T6
ROTINGER
RT 21123
ROTINGER
RT 21123-GL T5
SASIC
6106227
TEXTAR
92204900
TRISCAN
8120 43147
TRISCAN
8120 43147C
TRUSTING
DF1355
TRW
DF6431
VALEO
197773
VILLAR
628.2759
WOKING
D61424.10
ZEKKERT
BS-6205
ZIMMERMANN
285.3509.20
fri.tech.
BD1355
sbs
1815203438
sbs
1815313438
| Brand | Model | Engine code | Fuel | Displacement | HP | KW | Year |
| HYUNDAI | i20 (GB) | G4LA | Petrol | 1.2 | 75hp | 55kw | 2014-now |
| Important notes:Braking / Drive Dynamics: for vehicles without ESP;Fitting Position: Front Axle | |||||||
| HYUNDAI | i20 I (PB, PBT) | D3FA | Diesel | 1.1 | 75hp | 55kw | 2012-2015 |
| Important notes:Braking / Drive Dynamics: for vehicles without ESP;Fitting Position: Front Axle | |||||||
| HYUNDAI | i20 I (PB, PBT) | D4FB | Diesel | 1.6 | 116hp | 85kw | 2008-2012 |
| Important notes:Braking / Drive Dynamics: for vehicles without ESP;Fitting Position: Front Axle | |||||||
| HYUNDAI | i20 I (PB, PBT) | D4FB | Diesel | 1.6 | 128hp | 94kw | 2009-2012 |
| Important notes:Braking / Drive Dynamics: for vehicles without ESP;Fitting Position: Front Axle | |||||||
| HYUNDAI | i20 I (PB, PBT) | D4FC | Diesel | 1.4 | 75hp | 55kw | 2008-2012 |
| Important notes:Braking / Drive Dynamics: for vehicles without ESP;Fitting Position: Front Axle | |||||||
| HYUNDAI | i20 I (PB, PBT) | D4FC | Diesel | 1.4 | 90hp | 66kw | 2008-2015 |
| Important notes:Braking / Drive Dynamics: for vehicles without ESP;Fitting Position: Front Axle | |||||||
| HYUNDAI | i20 I (PB, PBT) | G4AG | Petrol | 1.2 | 76hp | 56kw | 2008-2014 |
| Important notes:Braking / Drive Dynamics: for vehicles without ESP;Fitting Position: Front Axle | |||||||
| HYUNDAI | i20 I (PB, PBT) | G4FA | Petrol | 1.4 | 101hp | 74kw | 2008-2015 |
| Important notes:Braking / Drive Dynamics: for vehicles without ESP;Fitting Position: Front Axle | |||||||
| HYUNDAI | i20 I (PB, PBT) | G4FC | Petrol | 1.6 | 126hp | 93kw | 2008-2012 |
| Important notes:Braking / Drive Dynamics: for vehicles without ESP;Fitting Position: Front Axle | |||||||
| HYUNDAI | i20 I (PB, PBT) | G4LA | Petrol/Liquified Petroleum Gas (LPG) | 1.2 | 82hp | 60kw | 2009-2014 |
| Important notes:Braking / Drive Dynamics: for vehicles without ESP;Fitting Position: Front Axle | |||||||
| HYUNDAI | i20 I (PB, PBT) | G4LA | Petrol | 1.2 | 78hp | 57kw | 2008-2012 |
| Important notes:Braking / Drive Dynamics: for vehicles without ESP;Fitting Position: Front Axle | |||||||
| HYUNDAI | i20 I (PB, PBT) | G4LA | Petrol | 1.2 | 86hp | 63kw | 2012-2015 |
| Important notes:Braking / Drive Dynamics: for vehicles without ESP;Fitting Position: Front Axle | |||||||
| HYUNDAI | i20 II (GB, IB) | G4LA | Petrol | 1.2 | 75hp | 55kw | 2014-now |
| Important notes:Braking / Drive Dynamics: for vehicles without ESP;Fitting Position: Front Axle | |||||||
| HYUNDAI | i20 II Hatchback Van (GB, IB) | G4LA | Petrol | 1.2 | 75hp | 55kw | 2015-now |
| Important notes:Braking / Drive Dynamics: for vehicles without ESP;Fitting Position: Front Axle | |||||||
SIMILAR PRODUCTS FOR YOUR VEHICLE
Brake Disc
Art-Nr: 0986479577
Number of Holes: 4
Height [mm]: 46.8 mm
Minimum thickness [mm]: 16 mm
Brake Disc Thickness [mm]: 18 mm
Outer diameter [mm]: 256 mm
Centering Diameter [mm]: 62,2 mm
Bolt Hole Circle Ø [mm]: 100 mm
Brake Disc Type: Vented
Surface: Oiled
Fulfils ECE norm: ECE-R90
Drill Diameter, up to [mm]: 12.6 mm
$18.46
no VAT req.
Available: 2
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Add to wishlist
Brake Disc
Art-Nr: 360406114000
Tightening Torque [Nm]: 100 Nm
Bolt Hole Circle Ø [mm]: 62.2 mm
Number of Holes: 4
Minimum thickness [mm]: 16 mm
Brake Disc Thickness [mm]: 18 mm
Height [mm]: 47 mm
Diameter [mm]: 256 mm
Surface: Uncoated
Brake Disc Type: Internally Vented
Outer diameter [mm]: 256 mm
Supplementary Article/Info 2: with bolts/screws
$42.54
no VAT req.
Available: 2
Special Order
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
Handling time: About 30 business day(s)
Handling Time: About 30 business day(s)
The item should be shipped within 20 business day(s) of receiving cleared payment.
?
The item should be shipped within 30 business day(s) of receiving cleared payment.
Add to wishlist
Brake Disc
Art-Nr: 197773
Weight [kg]: 9.43 kg
Number of mounting bores: 2
Rim Hole Number: 4 -Hole
Minimum thickness [mm]: 16 mm
Height [mm]: 46.8 mm
Centering Diameter [mm]: 62.2 mm
Brake Disc Thickness [mm]: 18 mm
Outer diameter [mm]: 255.9 mm
Brake Disc Type: Vented
Fitting Position: Front Axle
Test Mark: ECE-R90
$42.77
no VAT req.
Available: 4
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Brake Disc
Art-Nr: BG4535
Brake Disc Type: Vented
Number of Holes: 4
Minimum thickness [mm]: 16 mm
Brake Disc Thickness [mm]: 18 mm
Height [mm]: 47 mm
Centering Diameter [mm]: 62 mm
Outer diameter [mm]: 256 mm
Machining: Untreated
Surface: Oiled
Supplementary Article/Info 2: without ABS sensor ring
Supplementary Article/Info 2: without wheel bearing
Test Mark: E1 90R-02C0277/1427
$25.21
no VAT req.
Available: 5
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Brake Disc
Art-Nr: ADG043152
Weight [kg]: 4,530 kg
Surface: Coated
Centering Diameter [mm]: 62.1 mm
Minimum thickness [mm]: 16 mm
Fitting Position: Front Axle
Brake Disc Type: Internally Vented
Bolt Hole Circle Ø [mm]: 100 mm
Number of mounting bores: 2
Brake Disc Thickness [mm]: 18 mm
Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Outer diameter [mm]: 256 mm
Thickness [mm]: 47 mm
Rim Hole Number: 4 -Hole
$20.84
no VAT req.
Available: 8
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Brake Disc
Art-Nr: 108426
Centering Diameter [mm]: 62.1 mm
Minimum thickness [mm]: 16 mm
Fitting Position: Front Axle
Brake Disc Type: Internally Vented
Surface: Coated
Bolt Hole Circle Ø [mm]: 100 mm
Thickness [mm]: 46.8 mm
Number of mounting bores: 2
Brake Disc Thickness [mm]: 18 mm
Weight [kg]: 4,530 kg
Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Outer diameter [mm]: 256 mm
Rim Hole Number: 4 -Hole
$23.38
no VAT req.
Available: 8
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Brake Disc
Art-Nr: 24.0118-0151.1
Surface: Coated
Outer diameter [mm]: 256,0 mm
Number of Holes: 4
Minimum thickness [mm]: 16,0 mm
Inner diameter [mm]: 126,0 mm
Height [mm]: 46,9 mm
Centering Diameter [mm]: 62,2 mm
Brake Disc Type: Vented
Brake Disc Thickness [mm]: 18,0 mm
Bore Ø [mm]: 12,5 mm
Bolt Hole Circle Ø [mm]: 100,0 mm
Fitting Position: Front Axle
Test Mark: E1 90R-02C0115/0154
$46.50
no VAT req.
Available: 6
Handling time: About 30 business day(s)
Handling Time: About 30 business day(s)
?
The item should be shipped within 30 business day(s) of receiving cleared payment.
Add to wishlist
Brake Disc
Art-Nr: BS-8294
Minimum thickness [mm]: 16 mm
Hole Arrangement / Number: 4/6
Height [mm]: 46,8 mm
Fitting Position: Front Axle
Centering Diameter [mm]: 62,2 mm
Brake Disc Type: Vented
Brake Disc Thickness [mm]: 18 mm
Outer diameter [mm]: 256 mm
$9.10
no VAT req.
Available: 8
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Brake Disc
Art-Nr: BS-8294C
Surface: Coated
Minimum thickness [mm]: 16 mm
Hole Arrangement / Number: 4/6
Height [mm]: 46,8 mm
Fitting Position: Front Axle
Centering Diameter [mm]: 62,2 mm
Brake Disc Type: Vented
Brake Disc Thickness [mm]: 18 mm
Outer diameter [mm]: 256 mm
$21.60
no VAT req.
Available: 10+
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Brake Disc
Art-Nr: DF6431
Surface: Painted
Outer diameter [mm]: 256 mm
Number of Holes: 4
Minimum thickness [mm]: 16 mm
Height [mm]: 46,8 mm
Colour: Black
Centering Diameter [mm]: 62,2 mm
Brake Disc Type: Vented
Brake Disc Thickness [mm]: 18 mm
Bolt Hole Circle Ø [mm]: 100 mm
$32.12
no VAT req.
Available: 2
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
ACKOJAP Brake Disc
Brake Disc
Art-Nr: A52-40006
Centering Diameter [mm]: 76 mm
Minimum thickness [mm]: 8.4 mm
Brake Disc Thickness [mm]: 10 mm
Brake Disc Type: Solid
Height [mm]: 61 mm
Bolt Hole Circle Ø [mm]: 114.3 mm
Rim Hole Number: 4 -Hole
Outer diameter [mm]: 262 mm
Brake Disc Hub Height [mm]: 51 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$19.60
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Brake Disc
Art-Nr: A37-80006
Centering Diameter [mm]: 87 mm
Minimum thickness [mm]: 22.4 mm
Brake Disc Thickness [mm]: 24 mm
Brake Disc Type: Vented
Height [mm]: 45.1 mm
Bolt Hole Circle Ø [mm]: 108 mm
Rim Hole Number: 6 -Hole
Outer diameter [mm]: 276 mm
Brake Disc Hub Height [mm]: 21,1 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$20.66
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Brake Disc
Art-Nr: A32-40005
Minimum thickness [mm]: 8 mm
Brake Disc Thickness [mm]: 10 mm
Brake Disc Type: Solid
Height [mm]: 40.2 mm
Bolt Hole Circle Ø [mm]: 114.3 mm
Centering Diameter [mm]: 72 mm
Fitting Position: Rear Axle
Rim Hole Number: 5 -Hole
Outer diameter [mm]: 280 mm
Brake Disc Hub Height [mm]: 30,2 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$17.83
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Brake Disc
Art-Nr: A52-40004
Centering Diameter [mm]: 76 mm
Minimum thickness [mm]: 8 mm
Brake Disc Thickness [mm]: 10 mm
Brake Disc Type: Solid
Height [mm]: 40.4 mm
Bolt Hole Circle Ø [mm]: 114.3 mm
Rim Hole Number: 4 -Hole
Outer diameter [mm]: 258 mm
Brake Disc Hub Height [mm]: 30,4 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$17.95
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Brake Disc
Art-Nr: A37-40001
Minimum thickness [mm]: 8.4 mm
Brake Disc Thickness [mm]: 10 mm
Brake Disc Type: Solid
Height [mm]: 41 mm
Bolt Hole Circle Ø [mm]: 114.3 mm
Centering Diameter [mm]: 90 mm
Rim Hole Number: 4 -Hole
Outer diameter [mm]: 260 mm
Fitting Position: Rear Axle
Brake Disc Hub Height [mm]: 31 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$48.54
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Brake Disc
Art-Nr: A26-80005
Minimum thickness [mm]: 21 mm
Brake Disc Thickness [mm]: 23 mm
Brake Disc Type: Vented
Height [mm]: 47.1 mm
Bolt Hole Circle Ø [mm]: 114.3 mm
Centering Diameter [mm]: 70.2 mm
Fitting Position: Front Axle
Rim Hole Number: 5 -Hole
Outer diameter [mm]: 282 mm
Brake Disc Hub Height [mm]: 24,1 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$29.70
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Brake Disc
Art-Nr: A32-80001
Minimum thickness [mm]: 22 mm
Brake Disc Thickness [mm]: 24 mm
Brake Disc Type: Vented
Height [mm]: 48.6 mm
Bolt Hole Circle Ø [mm]: 114.3 mm
Centering Diameter [mm]: 72 mm
Fitting Position: Front Axle
Rim Hole Number: 5 -Hole
Outer diameter [mm]: 258 mm
Brake Disc Hub Height [mm]: 24,6 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$26.10
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Brake Disc
Art-Nr: A26-80004
Minimum thickness [mm]: 15 mm
Brake Disc Thickness [mm]: 17 mm
Brake Disc Type: Vented
Height [mm]: 44 mm
Bolt Hole Circle Ø [mm]: 100 mm
Centering Diameter [mm]: 61 mm
Fitting Position: Front Axle
Rim Hole Number: 4 -Hole
Outer diameter [mm]: 231 mm
Brake Disc Hub Height [mm]: 27 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$18.18
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Brake Disc
Art-Nr: A32-40008
Centering Diameter [mm]: 55 mm
Minimum thickness [mm]: 8 mm
Brake Disc Thickness [mm]: 10 mm
Brake Disc Type: Solid
Height [mm]: 39.9 mm
Bolt Hole Circle Ø [mm]: 100 mm
Rim Hole Number: 4 -Hole
Outer diameter [mm]: 261 mm
Brake Disc Hub Height [mm]: 29,9 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$16.14
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Brake Disc
Art-Nr: A26-80021
Centering Diameter [mm]: 92 mm
Minimum thickness [mm]: 23 mm
Brake Disc Thickness [mm]: 25 mm
Brake Disc Type: Vented
Height [mm]: 34.5 mm
Bolt Hole Circle Ø [mm]: 114.3 mm
Rim Hole Number: 4 -Hole
Outer diameter [mm]: 282 mm
Fitting Position: Front Axle
Brake Disc Hub Height [mm]: 9,5 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$22.78
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
