Temporarily unavailable
$0.00
Have questions about this item?
You can pay for your order using any of these types of cards: Visa, MasterCard; as well as through these payment systems: PayPal and Bank transfer. All orders need to be prepaid to start processing. The parts are not reserved until the payment is received.
We provide worldwide shipping, but some parts cannot be processed in an automatic way. In all those cases the manager will contact you and will offer special delivery.

Brake Disc

Art-Nr: A38-40009

ACKOJAP
Supplier: ACKOJAP

Product info

Rim Hole Number:
4 -Hole
Outer diameter [mm]:
231 mm
Minimum thickness [mm]:
18 mm
Height [mm]:
51,4 mm
Centering Diameter [mm]:
60 mm
Brake Disc Type:
Vented
Brake Disc Thickness [mm]:
20 mm
Brake Disc Hub Height [mm]:
31,4 mm
Bolt Hole Circle Ø [mm]:
100 mm
Additional Info:
In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
EAN:
4062375263417
Category:
Brake Disc
Condition:
new
Item Number:
A3840009
Brand
Code
A.B.S.
09.B492.10
A.B.S.
18021
ABE
C31109ABE
ACKOJAP
A38-40009
AKRON-MALÒ
1110627
AP
25334
APEC
DSK2781
APEC
SDK6635
ASHIKA
60-08-822C
ASHIKA
60-08-822
ASHUKI by Palidium
0990-7901
ATE
24.0120-0225.1
BLUE PRINT
ADK84332
BORG & BECK
BBD4787
BOSCH
0 986 479 778
BRAXIS
AE0185
BRECO
BS 8944
BREMBO
09.B492.10
BREMSI
CD7960V
BSF
11839V
Brake ENGINEERING
DI956871
CAR
142.1534
CHAMPION
562674CH
CIFAM
800-1267
COMLINE
ADC0276V
COMLINE
AND6347
DELPHI
BG4271C
DELPHI
BG4271
DYNAMATRIX
DBD1960C
Dr!ve+
DP1010.11.1529
E.T.F.
19-6032
EUROBRAKE
5815315220
EUROBRAKE
5815205220
FEBI BILSTEIN
108443
FERODO
DDF1960C
FI.BA
FBD432
FREMAX
BD-6064
FTE
BS7743
FTE
BS7743B
GIRLING
6062141
HELLA
8DD 355 116-501
HELLA PAGID
8DD 355 116-501
HERTH+BUSS JAKOPARTS
J3308013
JAPANPARTS
DI-822
JAPANPARTS
DI-822C
JAPKO
60822C
JAPKO
60822
JURATEK
SUZ124
JURID
562674JC
KAISHIN
CBR428
KAMOKA
103554
KAVO PARTS
BR-8720-C
KAWE
61371 10
KEY PARTS
KBD4787
LPR
N2026V
MAGNETI MARELLI
600000086770
MAGNETI MARELLI
360406113100
MASTER-SPORT GERMANY
24012002251-PCS-MS
MAXGEAR
19-3346
MAXGEAR
19-3346SPORT
MDR
MFD-2822
METELLI
23-1267
METZGER
6110169
MEYLE
33-15 521 0008
MGA
D1961
MINTEX
MDC2167
MOTAQUIP
LVBD1565
NATIONAL
NBD1712
NIPPARTS
N3301097
NISSAN
40206-4A00G
NK
315220
NK
205220
NPS
N330N101
OPEN PARTS
BDA2586.20
OPTIMAL
BS-8322C
OPTIMAL
BS-8322
PAGID
55041
PEMEBLA
JAPDI-822
PILENGA
V563
PROTECHNIC
PRD2802
QUINTON HAZELL
BDC5968
RAICAM
RD01250
REMSA
61371.10
ROADHOUSE
61371.10
SASIC
6106318
ST-TEMPLIN
53.110.23790
ST-TEMPLIN
53.111.23790
SUZUKI
55311-M68K10
SWAG
33 10 6923
TEXTAR
92204100
TRISCAN
8120 101024C
TRUSTING
DF1382
TRW
DF6227
TRW
DF6214
VALEO
197538
VILLAR
628.2735
WOKING
D61371.10
ZIMMERMANN
540.2498.20
fri.tech.
BD1382
sbs
1815205220
sbs
1815315220
Brand Model Engine code Fuel Displacement HP KW Year
NISSANPIXO (UA0)K10 BPetrol/Liquified Petroleum Gas (LPG)1.068hp50kw2009-now
Important notes:Fitting Position: Front Axle
NISSANPIXO (UA0)K10 BPetrol1.068hp50kw2009-now
Important notes:Fitting Position: Front Axle
SUZUKIALTO VII (GF)K10BPetrol/Liquified Petroleum Gas (LPG)1.068hp50kw2009-now
Important notes:Fitting Position: Front Axle
SUZUKIALTO VII (GF)K10BPetrol1.067hp49kw2012-now
Important notes:Fitting Position: Front Axle
SUZUKIALTO VII (GF)K10BPetrol1.068hp50kw2009-now
Important notes:Fitting Position: Front Axle
SUZUKIALTOF8DPetrol0.848hp35kw2008-2012
Important notes:Fitting Position: Front Axle

SIMILAR PRODUCTS FOR YOUR VEHICLE

no image MAGNETI MARELLI Brake Disc MAGNETI MARELLI Art-Nr: 360406113100 Bolt Hole Circle Ø [mm]: 60 mm Number of Holes: 4 Minimum thickness [mm]: 18 mm Brake Disc Thickness [mm]: 20 mm Height [mm]: 51.2 mm Diameter [mm]: 231 mm Surface: Uncoated Brake Disc Type: Internally Vented Outer diameter [mm]: 231 mm
$43.96
no VAT req.
Available: 2 Special Order Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Handling time: About 30 business day(s) Handling Time: About 30 business day(s)
?
The item should be shipped within 30 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Brake Disc DELPHI BG4271C DELPHI Brake Disc DELPHI Art-Nr: BG4271C Brake Disc Type: Vented Number of Holes: 4 Minimum thickness [mm]: 18 mm Brake Disc Thickness [mm]: 20 mm Centering Diameter [mm]: 60 mm Height [mm]: 51 mm Outer diameter [mm]: 231 mm Machining: Untreated Surface: Coated Supplementary Article/Info 2: without ABS sensor ring Supplementary Article/Info 2: without wheel bearing Test Mark: E1 90R-02C0277/1762
$22.10
no VAT req.
Available: 5 Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Brake Disc BLUE PRINT ADK84332 BLUE PRINT Brake Disc BLUE PRINT Art-Nr: ADK84332 Weight [kg]: 4,290 kg Surface: Coated Centering Diameter [mm]: 60 mm Minimum thickness [mm]: 18 mm Fitting Position: Front Axle Brake Disc Type: Internally Vented Bolt Hole Circle Ø [mm]: 100 mm Number of mounting bores: 2 Brake Disc Thickness [mm]: 20 mm Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Outer diameter [mm]: 231 mm Thickness [mm]: 51 mm Rim Hole Number: 4 -Hole
$21.46
no VAT req.
Available: 8 Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Brake Disc FEBI BILSTEIN 108443 FEBI BILSTEIN Brake Disc FEBI BILSTEIN Art-Nr: 108443 Centering Diameter [mm]: 60 mm Minimum thickness [mm]: 18 mm Fitting Position: Front Axle Brake Disc Type: Internally Vented Surface: Coated Bolt Hole Circle Ø [mm]: 100 mm Thickness [mm]: 51.4 mm Number of mounting bores: 2 Brake Disc Thickness [mm]: 20 mm Weight [kg]: 4,290 kg Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Outer diameter [mm]: 231 mm Rim Hole Number: 4 -Hole
$22.80
no VAT req.
Available: 8 Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Brake Disc ATE 24.0120-0225.1 ATE Brake Disc ATE Art-Nr: 24.0120-0225.1 Surface: Coated Outer diameter [mm]: 231,0 mm Number of Holes: 4 Minimum thickness [mm]: 18,0 mm Inner diameter [mm]: 125,0 mm Height [mm]: 51,4 mm Centering Diameter [mm]: 60,0 mm Brake Disc Type: Vented Brake Disc Thickness [mm]: 20,0 mm Bore Ø [mm]: 12,7 mm Bolt Hole Circle Ø [mm]: 100,0 mm Fitting Position: Front Axle Test Mark: E1 90R-02C0115/0750
$33.34
no VAT req.
Available: 6 Handling time: About 30 business day(s) Handling Time: About 30 business day(s)
?
The item should be shipped within 30 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
no image OPTIMAL Brake Disc OPTIMAL Art-Nr: BS-8322C Surface: Coated Minimum thickness [mm]: 18 mm Hole Arrangement / Number: 4/6 Height [mm]: 51,4 mm Fitting Position: Front Axle Centering Diameter [mm]: 60 mm Brake Disc Type: Vented Brake Disc Thickness [mm]: 20 mm Outer diameter [mm]: 231 mm
$19.91
no VAT req.
Available: 10+ Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Brake Disc TRW DF6214 TRW Brake Disc TRW Art-Nr: DF6214 Surface: Painted Outer diameter [mm]: 231 mm Number of Holes: 4 Minimum thickness [mm]: 18 mm Height [mm]: 51,4 mm Colour: Black Centering Diameter [mm]: 60 mm Brake Disc Type: Vented Brake Disc Thickness [mm]: 20 mm Bolt Hole Circle Ø [mm]: 100 mm
$25.05
no VAT req.
Available: 6 Handling time: About 2 business day(s) Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Brake Disc MEYLE 33-155210008 MEYLE Brake Disc MEYLE Art-Nr: 33-155210008 Wheel Bolt Bore Ø [mm]: 12,75 mm Required quantity: 2 Outer diameter [mm]: 231 mm Number of Holes: 4 Minimum thickness [mm]: 18 mm Height [mm]: 51,5 mm Fitting Position: Front Axle Centering Diameter [mm]: 60 mm Brake Disc Type: Vented Brake Disc Thickness [mm]: 20 mm Bolt Hole Circle Ø [mm]: 100 mm
$24.48
no VAT req.
Available: 10+ Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
no image KAMOKA Brake Disc KAMOKA Art-Nr: 103554 Surface: Coated Number of Holes: 4 Minimum thickness [mm]: 18,0 mm Inspection Tag: E1 90R-02C0115/0750 Inner diameter [mm]: 125,0 mm Height [mm]: 51,4 mm Diameter [mm]: 231,0 mm Centering Diameter [mm]: 60,0 mm Brake Disc Type: Vented Brake Disc Thickness [mm]: 20,0 mm Bore Ø [mm]: 12,7 mm Bolt Hole Circle Ø [mm]: 100,0 mm
$15.69
no VAT req.
Available: 6 Handling time: About 2 business day(s) Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Brake Disc MAXGEAR 193346 MAXGEAR Brake Disc MAXGEAR Art-Nr: 193346 Brake Disc Type: Internally Vented Minimum thickness [mm]: 18 mm Centering Diameter [mm]: 60 mm Fitting Position: Front Axle Bolt Hole Circle Ø [mm]: 100 mm Outer diameter [mm]: 231,0 mm Brake Disc Thickness [mm]: 20 mm
$16.44
no VAT req.
Available: 10+ Available: 10+ Handling time: About 2 business day(s) Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Handling time: About 5 business day(s) Handling Time: About 5 business day(s)
?
The item should be shipped within 5 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro

ACKOJAP Brake Disc

Brake Disc ACKOJAP A52-40006 ACKOJAP Brake Disc ACKOJAP Art-Nr: A52-40006 Centering Diameter [mm]: 76 mm Minimum thickness [mm]: 8.4 mm Brake Disc Thickness [mm]: 10 mm Brake Disc Type: Solid Height [mm]: 61 mm Bolt Hole Circle Ø [mm]: 114.3 mm Rim Hole Number: 4 -Hole Outer diameter [mm]: 262 mm Brake Disc Hub Height [mm]: 51 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$19.51
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Brake Disc ACKOJAP A37-80006 ACKOJAP Brake Disc ACKOJAP Art-Nr: A37-80006 Centering Diameter [mm]: 87 mm Minimum thickness [mm]: 22.4 mm Brake Disc Thickness [mm]: 24 mm Brake Disc Type: Vented Height [mm]: 45.1 mm Bolt Hole Circle Ø [mm]: 108 mm Rim Hole Number: 6 -Hole Outer diameter [mm]: 276 mm Brake Disc Hub Height [mm]: 21,1 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$20.57
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Brake Disc ACKOJAP A32-40005 ACKOJAP Brake Disc ACKOJAP Art-Nr: A32-40005 Minimum thickness [mm]: 8 mm Brake Disc Thickness [mm]: 10 mm Brake Disc Type: Solid Height [mm]: 40.2 mm Bolt Hole Circle Ø [mm]: 114.3 mm Centering Diameter [mm]: 72 mm Fitting Position: Rear Axle Rim Hole Number: 5 -Hole Outer diameter [mm]: 280 mm Brake Disc Hub Height [mm]: 30,2 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$17.75
no VAT req.
Available: 10+ Available: 10+ Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Brake Disc ACKOJAP A52-40004 ACKOJAP Brake Disc ACKOJAP Art-Nr: A52-40004 Centering Diameter [mm]: 76 mm Minimum thickness [mm]: 8 mm Brake Disc Thickness [mm]: 10 mm Brake Disc Type: Solid Height [mm]: 40.4 mm Bolt Hole Circle Ø [mm]: 114.3 mm Rim Hole Number: 4 -Hole Outer diameter [mm]: 258 mm Brake Disc Hub Height [mm]: 30,4 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$17.86
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Brake Disc ACKOJAP A37-40001 ACKOJAP Brake Disc ACKOJAP Art-Nr: A37-40001 Minimum thickness [mm]: 8.4 mm Brake Disc Thickness [mm]: 10 mm Brake Disc Type: Solid Height [mm]: 41 mm Bolt Hole Circle Ø [mm]: 114.3 mm Centering Diameter [mm]: 90 mm Rim Hole Number: 4 -Hole Outer diameter [mm]: 260 mm Fitting Position: Rear Axle Brake Disc Hub Height [mm]: 31 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$48.32
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Brake Disc ACKOJAP A26-80005 ACKOJAP Brake Disc ACKOJAP Art-Nr: A26-80005 Minimum thickness [mm]: 21 mm Brake Disc Thickness [mm]: 23 mm Brake Disc Type: Vented Height [mm]: 47.1 mm Bolt Hole Circle Ø [mm]: 114.3 mm Centering Diameter [mm]: 70.2 mm Fitting Position: Front Axle Rim Hole Number: 5 -Hole Outer diameter [mm]: 282 mm Brake Disc Hub Height [mm]: 24,1 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$29.56
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Brake Disc ACKOJAP A32-80001 ACKOJAP Brake Disc ACKOJAP Art-Nr: A32-80001 Minimum thickness [mm]: 22 mm Brake Disc Thickness [mm]: 24 mm Brake Disc Type: Vented Height [mm]: 48.6 mm Bolt Hole Circle Ø [mm]: 114.3 mm Centering Diameter [mm]: 72 mm Fitting Position: Front Axle Rim Hole Number: 5 -Hole Outer diameter [mm]: 258 mm Brake Disc Hub Height [mm]: 24,6 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$25.98
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Brake Disc ACKOJAP A26-80004 ACKOJAP Brake Disc ACKOJAP Art-Nr: A26-80004 Minimum thickness [mm]: 15 mm Brake Disc Thickness [mm]: 17 mm Brake Disc Type: Vented Height [mm]: 44 mm Bolt Hole Circle Ø [mm]: 100 mm Centering Diameter [mm]: 61 mm Fitting Position: Front Axle Rim Hole Number: 4 -Hole Outer diameter [mm]: 231 mm Brake Disc Hub Height [mm]: 27 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$18.09
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Brake Disc ACKOJAP A32-40008 ACKOJAP Brake Disc ACKOJAP Art-Nr: A32-40008 Centering Diameter [mm]: 55 mm Minimum thickness [mm]: 8 mm Brake Disc Thickness [mm]: 10 mm Brake Disc Type: Solid Height [mm]: 39.9 mm Bolt Hole Circle Ø [mm]: 100 mm Rim Hole Number: 4 -Hole Outer diameter [mm]: 261 mm Brake Disc Hub Height [mm]: 29,9 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$16.06
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Brake Disc ACKOJAP A26-80021 ACKOJAP Brake Disc ACKOJAP Art-Nr: A26-80021 Centering Diameter [mm]: 92 mm Minimum thickness [mm]: 23 mm Brake Disc Thickness [mm]: 25 mm Brake Disc Type: Vented Height [mm]: 34.5 mm Bolt Hole Circle Ø [mm]: 114.3 mm Rim Hole Number: 4 -Hole Outer diameter [mm]: 282 mm Fitting Position: Front Axle Brake Disc Hub Height [mm]: 9,5 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$22.68
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro