$30.82
no VAT req.
Available: 10+ Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
$30.82
Have questions about this item?
You can pay for your order using any of these types of cards: Visa, MasterCard; as well as through these payment systems: PayPal and Bank transfer. All orders need to be prepaid to start processing. The parts are not reserved until the payment is received.
We provide worldwide shipping, but some parts cannot be processed in an automatic way. In all those cases the manager will contact you and will offer special delivery.

Control Arm/Trailing Arm, wheel suspension

Art-Nr: A37-1141

ACKOJAP
Supplier: ACKOJAP
Control Arm/Trailing Arm, wheel suspension ACKOJAP A37-1141
Control Arm/Trailing Arm, wheel suspension ACKOJAP A37-1141 main

Product info

Fitting Position:
Lower Front Axle
 
Right
Control/Trailing Arm Type:
Control Arm
Additional Info:
In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
EAN:
4046001950681
Category:
Steering Link
 
Control Arm/Swing Arm Joint
 
Steering Links / Mounting
Condition:
new
Item Number:
A371141
Brand
Code
A.B.S.
211211
ACKOJAP
A37-1141
ASHIKA
72-05-528R
BGA
TRC1418
BGA
TRC6103
BLUE PRINT
ADC486116
CORTECO
49398837
DAYCO
DSS3497
DELPHI
TC2345
FAG
821 0887 10
FAI AutoParts
SS7490
FEBEST
0424-CWRH
FEBI BILSTEIN
38171
FIRST LINE
FCA6764
HERTH+BUSS JAKOPARTS
J4915036
JAPANPARTS
BS-528R
JAPKO
72528R
JP GROUP
3940105380
KAVO PARTS
SCA-5542
KLOKKERHOLM
3750362
LEMFÖRDER
38538 01
MAGNETI MARELLI
301181382100
MAPCO
49411
METZGER
58069802
MEYLE
32-16 050 0004/HD
MEYLE
32-16 050 0092/HD
MITSUBISHI
4013A282
MITSUBISHI
4013A010
MITSUBISHI
4013A428
MONROE
L10589
MOOG
PE-WP-7428
NIPPARTS
N4915023
NK
5013024
OPTIMAL
G6-1364
PEUGEOT
3521.V0
PEUGEOT
3521.R1
PEUGEOT
1612448480
SIDEM
71473
SKF
VKDS 323107 B
SWAG
62 93 8171
TRISCAN
8500 10589
TRW
JTC2227
Brand Model Engine code Fuel Displacement HP KW Year
CITROËNC-CROSSER (VU_, VV_)4B11Petrol2.0147hp108kw2010-2012
CITROËNC-CROSSER (VU_, VV_)4HK (DW12ME5)Diesel2.2156hp115kw2007-2012
CITROËNC-CROSSER (VU_, VV_)4HN (DW12MTED4)Diesel2.2156hp115kw2007-2012
CITROËNC-CROSSER (VU_, VV_)SFZ (4B12 MMC)Petrol2.4170hp125kw2008-2012
CITROËNC-CROSSER ENTERPRISE (VU_, VV_)4B12Petrol2.4170hp125kw2009-now
CITROËNC-CROSSER ENTERPRISE (VU_, VV_)4HN (DW12MTED4)Diesel2.2156hp115kw2009-now
CITROËNC4 AIRCROSS4A92Petrol1.6117hp86kw2012-now
Important notes:for RPO number (vehicle manufacturing date) up to: 13691
CITROËNC4 AIRCROSS4B11Petrol2.0150hp110kw2012-now
Important notes:for RPO number (vehicle manufacturing date) up to: 13691
CITROËNC4 AIRCROSS4N13Diesel1.8150hp110kw2012-now
Important notes:for RPO number (vehicle manufacturing date) up to: 13691
CITROËNC4 AIRCROSS9HD (DV6C)Diesel1.6114hp84kw2012-now
Important notes:for RPO number (vehicle manufacturing date) up to: 13691
CITROËNC4 AIRCROSS9HL (DV6C)Diesel1.6114hp84kw2012-now
Important notes:for RPO number (vehicle manufacturing date) up to: 13691
CITROËNC4 AIRCROSSNKZ (4A92)Petrol1.6117hp86kw2012-now
Important notes:for RPO number (vehicle manufacturing date) up to: 13691
MITSUBISHIASX (GA_W_)4A92Petrol/Liquified Petroleum Gas (LPG)1.6117hp86kw2010-now
Important notes:Construction year to: 201403
MITSUBISHIASX (GA_W_)4A92Petrol1.6116hp85kw2010-now
Important notes:Construction year to: 201403
MITSUBISHIASX (GA_W_)4A92Petrol1.6117hp86kw2010-now
Important notes:Construction year to: 201403
MITSUBISHIASX (GA_W_)4B10Petrol1.8139hp102kw2010-now
Important notes:Construction year to: 201403
MITSUBISHIASX (GA_W_)4B11Petrol2.0150hp110kw2010-now
Important notes:Construction year to: 201403
MITSUBISHIASX (GA_W_)4J10Petrol1.8139hp102kw2010-now
Important notes:Construction year to: 201403
MITSUBISHIASX (GA_W_)4J11Petrol2.0150hp110kw2010-now
Important notes:Construction year to: 201403
MITSUBISHIASX (GA_W_)4N13Diesel1.8116hp85kw2010-now
Important notes:Construction year to: 201403
MITSUBISHIASX (GA_W_)4N13Diesel1.8150hp110kw2010-now
Important notes:Construction year to: 201403
MITSUBISHIASX (GA_W_)4N14Diesel2.2150hp110kw2013-now
Important notes:Construction year to: 201403
MITSUBISHIASX Van (GA_W_)4N13Diesel1.8150hp110kw2010-now
Important notes:Construction year to: 201403
MITSUBISHILANCER Saloon (CY/Z_A)4A91Petrol/Liquified Petroleum Gas (LPG)1.5109hp80kw2010-now
Important notes:Construction year to: 201312
MITSUBISHILANCER Saloon (CY/Z_A)4A91Petrol1.5109hp80kw2008-now
Important notes:Construction year to: 201312
MITSUBISHILANCER Saloon (CY/Z_A)4A92Petrol1.6117hp86kw2010-now
Important notes:Construction year to: 201312
MITSUBISHILANCER Saloon (CY/Z_A)4B10Petrol/Ethanol1.8140hp103kw2009-now
Important notes:Construction year to: 201312
MITSUBISHILANCER Saloon (CY/Z_A)4B10Petrol/Ethanol1.8143hp105kw2010-now
Important notes:Construction year to: 201312
MITSUBISHILANCER Saloon (CY/Z_A)4B10Petrol/Liquified Petroleum Gas (LPG)1.8143hp105kw2010-now
Important notes:Construction year to: 201312
MITSUBISHILANCER Saloon (CY/Z_A)4B10Petrol1.8139hp102kw2009-now
Important notes:Construction year to: 201312
MITSUBISHILANCER Saloon (CY/Z_A)4B10Petrol1.8140hp103kw2010-now
Important notes:Construction year to: 201312
MITSUBISHILANCER Saloon (CY/Z_A)4B10Petrol1.8143hp105kw2008-now
Important notes:Construction year to: 201312
MITSUBISHILANCER Saloon (CY/Z_A)4B11 T/CPetrol2.0241hp177kw2008-now
Important notes:Construction year to: 201312
MITSUBISHILANCER Saloon (CY/Z_A)4B11-T/CPetrol2.0241hp177kw2008-now
Important notes:Construction year to: 201312
MITSUBISHILANCER Saloon (CY/Z_A)4B11Petrol2.0147hp108kw2009-now
Important notes:Construction year to: 201312
MITSUBISHILANCER Saloon (CY/Z_A)4B11Petrol2.0150hp110kw2013-now
Important notes:Construction year to: 201312
MITSUBISHILANCER Saloon (CY/Z_A)4B11Petrol2.0154hp113kw2007-now
Important notes:Construction year to: 201312
MITSUBISHILANCER Saloon (CY/Z_A)4B11Petrol2.0155hp115kw2007-now
Important notes:Construction year to: 201312
MITSUBISHILANCER Saloon (CY/Z_A)4J10Petrol1.8139hp102kw2009-now
Important notes:Construction year to: 201312
MITSUBISHILANCER Saloon (CY/Z_A)4N13Diesel1.8116hp85kw2010-now
Important notes:Construction year to: 201312
MITSUBISHILANCER Saloon (CY/Z_A)4N13Diesel1.8150hp110kw2010-now
Important notes:Construction year to: 201312
MITSUBISHILANCER Saloon (CY/Z_A)BKDDiesel2.0140hp103kw2008-now
Important notes:Construction year to: 201312
MITSUBISHILANCER Saloon (CY/Z_A)BWCDiesel2.0140hp103kw2008-now
Important notes:Construction year to: 201312
MITSUBISHILANCER VII (CS_A, CT_A)4B11Petrol2.0154hp113kw2007-2013
MITSUBISHILANCER VIII (CY_A, CZ_A)4A91Petrol/Liquified Petroleum Gas (LPG)1.5109hp80kw2010-now
Important notes:Construction year to: 201312
MITSUBISHILANCER VIII (CY_A, CZ_A)4A91Petrol1.5109hp80kw2008-now
Important notes:Construction year to: 201312
MITSUBISHILANCER VIII (CY_A, CZ_A)4A92Petrol1.6117hp86kw2010-now
Important notes:Construction year to: 201312
MITSUBISHILANCER VIII (CY_A, CZ_A)4B10Petrol/Ethanol1.8140hp103kw2009-now
Important notes:Construction year to: 201312
MITSUBISHILANCER VIII (CY_A, CZ_A)4B10Petrol/Ethanol1.8143hp105kw2010-now
Important notes:Construction year to: 201312
MITSUBISHILANCER VIII (CY_A, CZ_A)4B10Petrol/Liquified Petroleum Gas (LPG)1.8143hp105kw2010-now
Important notes:Construction year to: 201312
MITSUBISHILANCER VIII (CY_A, CZ_A)4B10Petrol1.8139hp102kw2009-now
Important notes:Construction year to: 201312
MITSUBISHILANCER VIII (CY_A, CZ_A)4B10Petrol1.8140hp103kw2010-now
Important notes:Construction year to: 201312
MITSUBISHILANCER VIII (CY_A, CZ_A)4B10Petrol1.8143hp105kw2008-now
Important notes:Construction year to: 201312
MITSUBISHILANCER VIII (CY_A, CZ_A)4B11 T/CPetrol2.0241hp177kw2008-now
Important notes:Construction year to: 201312
MITSUBISHILANCER VIII (CY_A, CZ_A)4B11-T/CPetrol2.0241hp177kw2008-now
Important notes:Construction year to: 201312
MITSUBISHILANCER VIII (CY_A, CZ_A)4B11Petrol2.0147hp108kw2009-now
Important notes:Construction year to: 201312
MITSUBISHILANCER VIII (CY_A, CZ_A)4B11Petrol2.0150hp110kw2013-now
Important notes:Construction year to: 201312
MITSUBISHILANCER VIII (CY_A, CZ_A)4B11Petrol2.0154hp113kw2007-now
Important notes:Construction year to: 201312
MITSUBISHILANCER VIII (CY_A, CZ_A)4B11Petrol2.0155hp115kw2007-now
Important notes:Construction year to: 201312
MITSUBISHILANCER VIII (CY_A, CZ_A)4J10Petrol1.8139hp102kw2009-now
Important notes:Construction year to: 201312
MITSUBISHILANCER VIII (CY_A, CZ_A)4N13Diesel1.8116hp85kw2010-now
Important notes:Construction year to: 201312
MITSUBISHILANCER VIII (CY_A, CZ_A)4N13Diesel1.8150hp110kw2010-now
Important notes:Construction year to: 201312
MITSUBISHILANCER VIII (CY_A, CZ_A)BKDDiesel2.0140hp103kw2008-now
Important notes:Construction year to: 201312
MITSUBISHILANCER VIII (CY_A, CZ_A)BWCDiesel2.0140hp103kw2008-now
Important notes:Construction year to: 201312
MITSUBISHILANCER VIII Sportback (CX_A)4A91Petrol/Liquified Petroleum Gas (LPG)1.5109hp80kw2010-now
Important notes:Construction year to: 201312
MITSUBISHILANCER VIII Sportback (CX_A)4A91Petrol1.5109hp80kw2008-now
Important notes:Construction year to: 201312
MITSUBISHILANCER VIII Sportback (CX_A)4A92Petrol1.6117hp86kw2010-now
Important notes:Construction year to: 201312
MITSUBISHILANCER VIII Sportback (CX_A)4B10Petrol/Ethanol1.8140hp103kw2009-now
Important notes:Construction year to: 201312
MITSUBISHILANCER VIII Sportback (CX_A)4B10Petrol/Liquified Petroleum Gas (LPG)1.8143hp105kw2010-now
Important notes:Construction year to: 201312
MITSUBISHILANCER VIII Sportback (CX_A)4B10Petrol1.8140hp103kw2009-now
Important notes:Construction year to: 201312
MITSUBISHILANCER VIII Sportback (CX_A)4B10Petrol1.8143hp105kw2008-now
Important notes:Construction year to: 201312
MITSUBISHILANCER VIII Sportback (CX_A)4B11 T/CPetrol2.0241hp177kw2008-now
Important notes:Construction year to: 201312
MITSUBISHILANCER VIII Sportback (CX_A)4B11-T/CPetrol2.0241hp177kw2008-now
Important notes:Construction year to: 201312
MITSUBISHILANCER VIII Sportback (CX_A)4N13Diesel1.8116hp85kw2010-now
Important notes:Construction year to: 201312
MITSUBISHILANCER VIII Sportback (CX_A)4N13Diesel1.8150hp110kw2010-now
Important notes:Construction year to: 201312
MITSUBISHILANCER VIII Sportback (CX_A)BKDDiesel2.0140hp103kw2008-now
Important notes:Construction year to: 201312
MITSUBISHILANCER VIII Sportback (CX_A)BWCDiesel2.0140hp103kw2008-now
Important notes:Construction year to: 201312
MITSUBISHIOUTLANDER II (CW_W)4B11Petrol2.0147hp108kw2006-2012
MITSUBISHIOUTLANDER II (CW_W)4B12Petrol/Ethanol2.4170hp125kw2007-2012
MITSUBISHIOUTLANDER II (CW_W)4B12Petrol2.4170hp125kw2006-2012
MITSUBISHIOUTLANDER II (CW_W)4B12Petrol2.4170hp125kw2007-2012
MITSUBISHIOUTLANDER II (CW_W)4HKDiesel2.2156hp115kw2007-2012
MITSUBISHIOUTLANDER II (CW_W)4HNDiesel2.2156hp115kw2007-2012
MITSUBISHIOUTLANDER II (CW_W)4N14Diesel2.2140hp103kw2010-2012
MITSUBISHIOUTLANDER II (CW_W)4N14Diesel2.2177hp130kw2006-2012
MITSUBISHIOUTLANDER II (CW_W)6B31Petrol3.0220hp162kw2006-2012
MITSUBISHIOUTLANDER II (CW_W)BSYDiesel2.0140hp103kw2007-2012
MITSUBISHIOUTLANDER III (GG_W, GF_W, ZJ, ZL)4B11Petrol2.0143hp105kw2012-now
Important notes:Construction year to: 201506
MITSUBISHIOUTLANDER III (GG_W, GF_W, ZJ, ZL)4B11Petrol2.0146hp107kw2012-now
Important notes:Construction year to: 201506
MITSUBISHIOUTLANDER III (GG_W, GF_W, ZJ, ZL)4B12Petrol2.4167hp123kw2012-now
Important notes:Construction year to: 201506
MITSUBISHIOUTLANDER III (GG_W, GF_W, ZJ, ZL)4B12Petrol2.4169hp124kw2012-now
Important notes:Construction year to: 201506
MITSUBISHIOUTLANDER III (GG_W, GF_W, ZJ, ZL)4J11Petrol/Liquified Petroleum Gas (LPG)2.0146hp107kw2012-now
Important notes:Construction year to: 201506
MITSUBISHIOUTLANDER III (GG_W, GF_W, ZJ, ZL)4J11Petrol2.0150hp110kw2012-now
Important notes:Construction year to: 201506
MITSUBISHIOUTLANDER III (GG_W, GF_W, ZJ, ZL)4J11Petrol2.0152hp112kw2013-now
Important notes:Construction year to: 201506
MITSUBISHIOUTLANDER III (GG_W, GF_W, ZJ, ZL)4J12Petrol2.4169hp124kw2012-now
Important notes:Construction year to: 201506
MITSUBISHIOUTLANDER III (GG_W, GF_W, ZJ, ZL)4N14Diesel2.2150hp110kw2012-now
Important notes:Construction year to: 201506
MITSUBISHIOUTLANDER III (GG_W, GF_W, ZJ, ZL)4N14Diesel2.2179hp132kw2015-now
Important notes:Construction year to: 201506
MITSUBISHIOUTLANDER III (GG_W, GF_W, ZJ, ZL)6B31Petrol3.0224hp165kw2014-now
Important notes:Construction year to: 201506
MITSUBISHIOUTLANDER III (GG_W, GF_W, ZJ, ZL)6B31Petrol3.0227hp167kw2012-now
Important notes:Construction year to: 201506
MITSUBISHIOUTLANDER III (GG_W, GF_W, ZJ, ZL)6B31Petrol3.0230hp169kw2014-now
Important notes:Construction year to: 201506
MITSUBISHIOUTLANDER III (GG_W, GF_W, ZJ, ZL, ZK)4B11Petrol2.0143hp105kw2012-now
Important notes:Construction year to: 201506
MITSUBISHIOUTLANDER III (GG_W, GF_W, ZJ, ZL, ZK)4B11Petrol2.0146hp107kw2012-now
Important notes:Construction year to: 201506
MITSUBISHIOUTLANDER III (GG_W, GF_W, ZJ, ZL, ZK)4B12Petrol2.4167hp123kw2012-now
Important notes:Construction year to: 201506
MITSUBISHIOUTLANDER III (GG_W, GF_W, ZJ, ZL, ZK)4B12Petrol2.4169hp124kw2012-now
Important notes:Construction year to: 201506
MITSUBISHIOUTLANDER III (GG_W, GF_W, ZJ, ZL, ZK)4J11Petrol/Liquified Petroleum Gas (LPG)2.0146hp107kw2012-now
Important notes:Construction year to: 201506
MITSUBISHIOUTLANDER III (GG_W, GF_W, ZJ, ZL, ZK)4J11Petrol2.0150hp110kw2012-now
Important notes:Construction year to: 201506
MITSUBISHIOUTLANDER III (GG_W, GF_W, ZJ, ZL, ZK)4J11Petrol2.0152hp112kw2013-now
Important notes:Construction year to: 201506
MITSUBISHIOUTLANDER III (GG_W, GF_W, ZJ, ZL, ZK)4J12Petrol2.4169hp124kw2012-now
Important notes:Construction year to: 201506
MITSUBISHIOUTLANDER III (GG_W, GF_W, ZJ, ZL, ZK)4N14Diesel2.2150hp110kw2012-now
Important notes:Construction year to: 201506
MITSUBISHIOUTLANDER III (GG_W, GF_W, ZJ, ZL, ZK)4N14Diesel2.2179hp132kw2015-now
Important notes:Construction year to: 201506
MITSUBISHIOUTLANDER III (GG_W, GF_W, ZJ, ZL, ZK)6B31Petrol3.0224hp165kw2014-now
Important notes:Construction year to: 201506
MITSUBISHIOUTLANDER III (GG_W, GF_W, ZJ, ZL, ZK)6B31Petrol3.0227hp167kw2012-now
Important notes:Construction year to: 201506
MITSUBISHIOUTLANDER III (GG_W, GF_W, ZJ, ZL, ZK)6B31Petrol3.0230hp169kw2014-now
Important notes:Construction year to: 201506
PEUGEOT4007 (VU_, VV_)4B11Petrol2.0147hp108kw2010-2013
PEUGEOT4007 (VU_, VV_)4HK (DW12ME5)Diesel2.2156hp115kw2007-2013
PEUGEOT4007 (VU_, VV_)4HN (DW12MTED4)Diesel2.2156hp115kw2007-2013
PEUGEOT4007 (VU_, VV_)SFY (4B12-MMC)Petrol2.4170hp125kw2007-2013
PEUGEOT4007 (VU_, VV_)SFZ (4B12-MMC)Petrol2.4170hp125kw2007-2013
PEUGEOT40084A92Petrol1.6117hp86kw2012-now
Important notes:Construction year to: 201405;for RPO number (vehicle manufacturing date) up to: 13691
PEUGEOT40084B11Petrol2.0150hp110kw2012-now
Important notes:Construction year to: 201405;for RPO number (vehicle manufacturing date) up to: 13691
PEUGEOT40084B11Petrol2.0150hp110kw2013-now
Important notes:Construction year to: 201405;for RPO number (vehicle manufacturing date) up to: 13691
PEUGEOT40086HZ (4N13)Diesel1.8150hp110kw2012-now
Important notes:Construction year to: 201405;for RPO number (vehicle manufacturing date) up to: 13691
PEUGEOT40089HD (DV6C)Diesel1.6114hp84kw2012-now
Important notes:Construction year to: 201405;for RPO number (vehicle manufacturing date) up to: 13691

SIMILAR PRODUCTS FOR YOUR VEHICLE

Control Arm/Trailing Arm, wheel suspension FEBI BILSTEIN 38171 FEBI BILSTEIN Control Arm/Trailing Arm, wheel suspension FEBI BILSTEIN Art-Nr: 38171 Material: Sheet Steel Fitting Position: Front Axle Right Fitting Position: Lower Weight [kg]: 3.5 kg Cone Size [mm]: 20 mm Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Supplementary Article/Info 2: with bearing(s) Control/Trailing Arm Type: Control Arm paired article number: 38170
$47.15
no VAT req.
Available: 4 Handling time: About 10 business day(s) Handling Time: About 10 business day(s)
?
The item should be shipped within 10 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Control Arm/Trailing Arm, wheel suspension DELPHI TC2345 DELPHI Control Arm/Trailing Arm, wheel suspension DELPHI Art-Nr: TC2345 Length [mm]: 400 mm Height [mm]: 80 mm Width [mm]: 390 mm Control/Trailing Arm Type: Control Arm Thread Size 1: Pinch Bolt 20mm
$59.65
no VAT req.
Available: 5 Handling time: About 10 business day(s) Handling Time: About 10 business day(s)
?
The item should be shipped within 10 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Ball Joint FEBI BILSTEIN 171568 FEBI BILSTEIN Ball Joint FEBI BILSTEIN Art-Nr: 171568 Weight [kg]: 0,343 kg Fitting Position: Lower Cone Size [mm]: 20 mm Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Supplementary Article/Info 2: with retaining ring for OE number: 3520.X9 SK Fitting Position: Front Axle Right Fitting Position: Front Axle Left Control/Trailing Arm Type: Control Arm
$14.83
no VAT req.
Available: 4 Handling time: About 10 business day(s) Handling Time: About 10 business day(s)
?
The item should be shipped within 10 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Ball Joint SWAG 33100944 SWAG Ball Joint SWAG Art-Nr: 33100944 Weight [kg]: 0,343 kg Fitting Position: Lower Cone Size [mm]: 20 mm Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Supplementary Article/Info 2: with retaining ring Fitting Position: Front Axle Right Fitting Position: Front Axle Left Control/Trailing Arm Type: Control Arm
$13.96
no VAT req.
Available: 4 Handling time: About 10 business day(s) Handling Time: About 10 business day(s)
?
The item should be shipped within 10 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Control Arm-/Trailing Arm Bush FEBEST MAB105 FEBEST Control Arm-/Trailing Arm Bush FEBEST Art-Nr: MAB105 Weight [kg]: 0,185 kg Packaging width [cm]: 3,8 cm Packaging length [cm]: 6,0 cm Packaging height [cm]: 3,8 cm Fitting Position: Lower Front Axle Fitting Position: Front
$4.19
no VAT req.
Available: 3 Handling time: About 2 business day(s) Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Ball Joint FEBEST 0420CU FEBEST Ball Joint FEBEST Art-Nr: 0420CU Weight [kg]: 0,36 kg Quantity: 2 Packaging width [cm]: 4,4 cm Packaging length [cm]: 7,3 cm Packaging height [cm]: 4,4 cm Fitting Position: Lower Front Axle
$9.89
no VAT req.
Available: 4 Handling time: About 2 business day(s) Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Track Control Arm JAPKO 72528R JAPKO Track Control Arm JAPKO Art-Nr: 72528R Fitted Diameter [mm]: 20 mm Fitting Position: Right Front Inner diameter [mm]: 14 mm Overall Height [mm]: 72 mm
$36.37
no VAT req.
Available: 6 Handling time: About 2 business day(s) Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Track Control Arm FEBEST 0424CWRH FEBEST Track Control Arm FEBEST Art-Nr: 0424CWRH Weight [kg]: 3,59 kg Steering arm type: Control Arm Quantity: 5 Packaging width [cm]: 35,0 cm Packaging length [cm]: 38,0 cm Packaging height [cm]: 7,5 cm Fitting Position: Right Front
$44.74
no VAT req.
Available: 3 Handling time: About 2 business day(s) Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Ball Joint SASIC 7570011 SASIC Ball Joint SASIC Art-Nr: 7570011 Joint diameter (mm): 20 mm for OE number: Part/oe 1612448380 Fitting Position: Lower Fitting Position: Front Axle left and right
$7.77
no VAT req.
Available: 3 Handling time: About 2 business day(s) Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Track Control Arm LEMFORDER 3853801 LEMFORDER Track Control Arm LEMFORDER Art-Nr: 3853801 Steering arm type: Control Arm Paired article numbers: 38539 01 Material: Sheet Steel Length [mm]: 352,9 mm Fitting Position: Right Fitting Position: Front Axle Cone Size [mm]: 20 mm
$75.42
no VAT req.
Available: 1 Handling time: About 2 business day(s) Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro

ACKOJAP Control Arm/Swing Arm Joint

Control Arm/Trailing Arm, wheel suspension ACKOJAP A32-1137 ACKOJAP Control Arm/Trailing Arm, wheel suspension ACKOJAP Art-Nr: A32-1137 Fitting Position: Front Axle Fitting Position: Left Control/Trailing Arm Type: Control Arm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$58.44
no VAT req.
Available: 10+ Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Control Arm/Trailing Arm, wheel suspension ACKOJAP A32-1138 ACKOJAP Control Arm/Trailing Arm, wheel suspension ACKOJAP Art-Nr: A32-1138 Fitting Position: Front Axle Fitting Position: Right Control/Trailing Arm Type: Control Arm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$57.04
no VAT req.
Available: 10+ Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Control Arm/Trailing Arm, wheel suspension ACKOJAP A32-1142 ACKOJAP Control Arm/Trailing Arm, wheel suspension ACKOJAP Art-Nr: A32-1142 Fitting Position: Rear Axle Control/Trailing Arm Type: Control Arm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$42.92
no VAT req.
Available: 10+ Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Mounting, control/trailing arm ACKOJAP A38-0208 ACKOJAP Mounting, control/trailing arm ACKOJAP Art-Nr: A38-0208 Required quantity: 2 Fitting Position: Front Axle Fitting Position: Front Mounting Type: Rubber-Metal Mount Control/Trailing Arm Type: for control arm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$2.68
no VAT req.
Available: 10+ Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Control Arm/Trailing Arm, wheel suspension ACKOJAP A38-1160 ACKOJAP Control Arm/Trailing Arm, wheel suspension ACKOJAP Art-Nr: A38-1160 Fitting Position: Lower Cone Size [mm]: 16 mm Fitting Position: Front Axle Right Control/Trailing Arm Type: Control Arm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$37.27
no VAT req.
Available: 10+ Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Control Arm/Trailing Arm, wheel suspension ACKOJAP A52-0246 ACKOJAP Control Arm/Trailing Arm, wheel suspension ACKOJAP Art-Nr: A52-0246 Fitting Position: Front Axle Right paired article number: A52-0247 Control/Trailing Arm Type: Control Arm Article number of the recommended special tool: V99-1020 Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$119.89
no VAT req.
Available: 10+ Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Control Arm/Trailing Arm, wheel suspension ACKOJAP A64-1115 ACKOJAP Control Arm/Trailing Arm, wheel suspension ACKOJAP Art-Nr: A64-1115 Fitting Position: Front Axle Right Control/Trailing Arm Type: Control Arm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$34.88
no VAT req.
Available: 10+ Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Control Arm/Trailing Arm, wheel suspension ACKOJAP A64-1118 ACKOJAP Control Arm/Trailing Arm, wheel suspension ACKOJAP Art-Nr: A64-1118 Fitting Position: Front Axle Left Control/Trailing Arm Type: Control Arm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$40.58
no VAT req.
Available: 10+ Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Control Arm/Trailing Arm, wheel suspension ACKOJAP A64-1119 ACKOJAP Control Arm/Trailing Arm, wheel suspension ACKOJAP Art-Nr: A64-1119 Fitting Position: Front Axle Right Control/Trailing Arm Type: Control Arm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$44.21
no VAT req.
Available: 10+ Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Mounting, control/trailing arm ACKOJAP A70-0464 ACKOJAP Mounting, control/trailing arm ACKOJAP Art-Nr: A70-0464 Fitting Position: Rear Length [mm]: 89 mm Inner diameter [mm]: 14.5 mm Outer diameter [mm]: 56 mm Mounting Type: Rubber-Metal Mount Fitting Position: Front Axle Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$10.62
no VAT req.
Available: 10+ Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro