$48.56
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
$48.56
Have questions about this item?
You can pay for your order using any of these types of cards: Visa, MasterCard; as well as through these payment systems: PayPal and Bank transfer. All orders need to be prepaid to start processing. The parts are not reserved until the payment is received.
We provide worldwide shipping, but some parts cannot be processed in an automatic way. In all those cases the manager will contact you and will offer special delivery.
Wheel Bearing Kit
Art-Nr: A32-9567
Supplier:
ACKOJAP
Product info
Additional Info:
In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
EAN:
4062375242061
Category:
Wheel / Wheel Fastening
Wheel Hub / Mounting
Wheel Bearing
Condition:
new
Item Number:
A329567
Brand
Code
A.B.S.
201642
ACKOJAP
A32-9567
AIC
73285
ASHUKI by Palidium
M660-72
AUTOKIT
01.98116
AUTOTEAM
RA1584
BLUE PRINT
ADM58349
BORG & BECK
BWK1366
BTA
H23055BTA
CALIBER
RC1584
DODA
1060200160
FAG
713 6158 40
FAI AutoParts
FHBK1093
FEBI BILSTEIN
101370
FIRST LINE
FBK1366
FREMAX
FWB-1539
GSP
9400281
HERTH+BUSS JAKOPARTS
J4713049
KAMOKA
5500298
KAVO PARTS
WBH-4527
KAWE
8530 50245
KM International
RK1584
LUCAS
LKBA82009
LYNXauto
WH-1496
MAXGEAR
33-1047
MAZDA
KD31-26-15XB
MAZDA
KD31-26-15X
MAZDA
KD312615XB
MAZDA
KD31-26-15XA
METZGER
WM 2309
MOOG
MD-WB-12834
MOTAQUIP
LVBK1728
NK
763236
OPTIMAL
942404
PATRON
PBK4033H
PEMEBLA
JAPKK-23041
QUINTON HAZELL
QWB1614
RUVILLE
7056
SAKURA
4103565
SKF
VKBA 7649
SNR
R170.64
STELLOX
43-29062-SX
SWAG
83 10 1370
TRISCAN
8530 50245A
TRISCAN
8530 50245
| Brand | Model | Engine code | Fuel | Displacement | HP | KW | Year |
| MAZDA | 3 (BM, BN) | P5Y1 | Petrol | 1.5 | 100hp | 74kw | 2013-2019 |
| Important notes:Construction year from: 201409;Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18 | |||||||
| MAZDA | 3 (BM, BN) | P5Y1 | Petrol | 1.5 | 120hp | 88kw | 2013-2019 |
| Important notes:Construction year from: 201409;Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18 | |||||||
| MAZDA | 3 (BM, BN) | P5Y4 | Petrol | 1.5 | 100hp | 74kw | 2013-2019 |
| Important notes:Construction year from: 201409;Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18 | |||||||
| MAZDA | 3 (BM, BN) | P5Y4 | Petrol | 1.5 | 120hp | 88kw | 2013-2019 |
| Important notes:Construction year from: 201409;Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18 | |||||||
| MAZDA | 3 (BM, BN) | P5Y5 | Petrol | 1.5 | 100hp | 74kw | 2013-2019 |
| Important notes:Construction year from: 201409;Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18 | |||||||
| MAZDA | 3 (BM, BN) | P5Y5 | Petrol | 1.5 | 120hp | 88kw | 2013-2019 |
| Important notes:Construction year from: 201409;Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18 | |||||||
| MAZDA | 3 (BM, BN) | P5Z3 | Petrol | 1.5 | 100hp | 74kw | 2013-2019 |
| Important notes:Construction year from: 201409;Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18 | |||||||
| MAZDA | 3 (BM, BN) | P5Z3 | Petrol | 1.5 | 120hp | 88kw | 2013-2019 |
| Important notes:Construction year from: 201409;Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18 | |||||||
| MAZDA | 3 (BM, BN) | PEX2 | Petrol/Ethanol | 2.0 | 165hp | 121kw | 2014-2016 |
| Important notes:Fitting Position: Rear Axle;Rim Size [in]: 18;Vehicle Equipment: for vehicles without start-stop function | |||||||
| MAZDA | 3 (BM, BN) | PEX2 | Petrol | 2.0 | 165hp | 121kw | 2013-2019 |
| Important notes:Construction year from: 201409;Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18;Vehicle Equipment: for vehicles without start-stop function | |||||||
| MAZDA | 3 (BM, BN) | PEXL | Petrol | 2.0 | 120hp | 88kw | 2013-2019 |
| Important notes:Construction year from: 201409;Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18;Vehicle Equipment: for vehicles without start-stop function | |||||||
| MAZDA | 3 (BM, BN) | PEXL | Petrol | 2.0 | 165hp | 121kw | 2013-2019 |
| Important notes:Construction year from: 201409;Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18;Vehicle Equipment: for vehicles without start-stop function | |||||||
| MAZDA | 3 (BM, BN) | PEY5 | Petrol | 2.0 | 120hp | 88kw | 2013-2019 |
| Important notes:Construction year from: 201409;Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18;Vehicle Equipment: for vehicles without start-stop function | |||||||
| MAZDA | 3 (BM, BN) | PEY5 | Petrol | 2.0 | 155hp | 114kw | 2013-2019 |
| Important notes:Construction year from: 201409;Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18;Vehicle Equipment: for vehicles without start-stop function | |||||||
| MAZDA | 3 (BM, BN) | PEY5 | Petrol | 2.0 | 165hp | 121kw | 2013-2019 |
| Important notes:Construction year from: 201409;Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18;Vehicle Equipment: for vehicles without start-stop function | |||||||
| MAZDA | 3 (BM, BN) | PEY7 | Petrol | 2.0 | 120hp | 88kw | 2013-2019 |
| Important notes:Construction year from: 201409;Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18;Vehicle Equipment: for vehicles without start-stop function | |||||||
| MAZDA | 3 (BM, BN) | PEY7 | Petrol | 2.0 | 150hp | 110kw | 2013-2016 |
| Important notes:Construction year from: 201409;Fitting Position: Rear Axle;Rim Size [in]: 18 | |||||||
| MAZDA | 3 (BM, BN) | PEY7 | Petrol | 2.0 | 155hp | 114kw | 2013-2019 |
| Important notes:Construction year from: 201409;Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18;Vehicle Equipment: for vehicles without start-stop function | |||||||
| MAZDA | 3 (BM, BN) | PEY7 | Petrol | 2.0 | 165hp | 121kw | 2013-2019 |
| Important notes:Construction year from: 201409;Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18;Vehicle Equipment: for vehicles without start-stop function | |||||||
| MAZDA | 3 (BM, BN) | S5Y7 | Diesel | 1.5 | 105hp | 77kw | 2016-2019 |
| Important notes:Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18 | |||||||
| MAZDA | 3 (BM, BN) | S5Y8 | Diesel | 1.5 | 105hp | 77kw | 2016-2019 |
| Important notes:Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18 | |||||||
| MAZDA | 3 (BM, BN) | SHY4 | Diesel | 2.2 | 150hp | 110kw | 2013-2019 |
| Important notes:Braking / Drive Dynamics: for vehicles with ABS;Construction year from: 201503;Fitting Position: Rear Axle;Rim Size [in]: 18 | |||||||
| MAZDA | 3 (BM, BN) | SHY6 | Diesel | 2.2 | 150hp | 110kw | 2013-2019 |
| Important notes:Braking / Drive Dynamics: for vehicles with ABS;Construction year from: 201503;Fitting Position: Rear Axle;Rim Size [in]: 18 | |||||||
| MAZDA | 3 Hatchback Van (BM) | P5Y1 | Petrol | 1.5 | 101hp | 74kw | 2015-2016 |
| Important notes:Fitting Position: Rear Axle;Rim Size [in]: 18 | |||||||
| MAZDA | 3 Hatchback Van (BM) | SHY4 | Diesel | 2.2 | 150hp | 110kw | 2015-2016 |
| Important notes:Fitting Position: Rear Axle;Rim Size [in]: 18 | |||||||
| MAZDA | 3 Saloon (BM, BN) | P5Y1 | Petrol | 1.5 | 100hp | 74kw | 2014-2019 |
| Important notes:Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18 | |||||||
| MAZDA | 3 Saloon (BM, BN) | P5Y1 | Petrol | 1.5 | 120hp | 88kw | 2013-2019 |
| Important notes:Construction year from: 201409;Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18 | |||||||
| MAZDA | 3 Saloon (BM, BN) | P5Y4 | Petrol | 1.5 | 100hp | 74kw | 2014-2019 |
| Important notes:Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18 | |||||||
| MAZDA | 3 Saloon (BM, BN) | P5Y4 | Petrol | 1.5 | 120hp | 88kw | 2013-2019 |
| Important notes:Construction year from: 201409;Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18 | |||||||
| MAZDA | 3 Saloon (BM, BN) | P5Y5 | Petrol | 1.5 | 100hp | 74kw | 2014-2019 |
| Important notes:Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18 | |||||||
| MAZDA | 3 Saloon (BM, BN) | P5Y5 | Petrol | 1.5 | 120hp | 88kw | 2013-2019 |
| Important notes:Construction year from: 201409;Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18 | |||||||
| MAZDA | 3 Saloon (BM, BN) | P5Z3 | Petrol | 1.5 | 100hp | 74kw | 2014-2019 |
| Important notes:Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18 | |||||||
| MAZDA | 3 Saloon (BM, BN) | P5Z3 | Petrol | 1.5 | 120hp | 88kw | 2013-2019 |
| Important notes:Construction year from: 201409;Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18 | |||||||
| MAZDA | 3 Saloon (BM, BN) | PEX2 | Petrol | 2.0 | 165hp | 121kw | 2014-2019 |
| Important notes:Fitting Position: Rear Axle;Rim Size [in]: 18;Vehicle Equipment: for vehicles with start-stop function | |||||||
| MAZDA | 3 Saloon (BM, BN) | PEXL | Petrol | 2.0 | 120hp | 88kw | 2013-2019 |
| Important notes:Construction year from: 201409;Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18;Vehicle Equipment: for vehicles without start-stop function | |||||||
| MAZDA | 3 Saloon (BM, BN) | PEY5 | Petrol | 2.0 | 120hp | 88kw | 2013-2019 |
| Important notes:Construction year from: 201409;Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18;Vehicle Equipment: for vehicles without start-stop function | |||||||
| MAZDA | 3 Saloon (BM, BN) | PEY5 | Petrol | 2.0 | 153hp | 112kw | 2015-2016 |
| Important notes:Fitting Position: Rear Axle;Rim Size [in]: 18;Vehicle Equipment: for vehicles with start-stop function | |||||||
| MAZDA | 3 Saloon (BM, BN) | PEY5 | Petrol | 2.0 | 155hp | 114kw | 2013-2019 |
| Important notes:Construction year from: 201409;Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18;Vehicle Equipment: for vehicles without start-stop function | |||||||
| MAZDA | 3 Saloon (BM, BN) | PEY5 | Petrol | 2.0 | 165hp | 121kw | 2014-2019 |
| Important notes:Fitting Position: Rear Axle;Rim Size [in]: 18;Vehicle Equipment: for vehicles with start-stop function | |||||||
| MAZDA | 3 Saloon (BM, BN) | PEY7 | Petrol | 2.0 | 120hp | 88kw | 2013-2019 |
| Important notes:Construction year from: 201409;Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18;Vehicle Equipment: for vehicles without start-stop function | |||||||
| MAZDA | 3 Saloon (BM, BN) | PEY7 | Petrol | 2.0 | 150hp | 110kw | 2013-2016 |
| Important notes:Construction year from: 201409;Fitting Position: Rear Axle;Rim Size [in]: 18 | |||||||
| MAZDA | 3 Saloon (BM, BN) | PEY7 | Petrol | 2.0 | 155hp | 114kw | 2013-2019 |
| Important notes:Construction year from: 201409;Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18;Vehicle Equipment: for vehicles without start-stop function | |||||||
| MAZDA | 3 Saloon (BM, BN) | PEY7 | Petrol | 2.0 | 165hp | 121kw | 2014-2019 |
| Important notes:Fitting Position: Rear Axle;Rim Size [in]: 18;Vehicle Equipment: for vehicles with start-stop function | |||||||
| MAZDA | 3 Saloon (BM, BN) | S5Y7 | Diesel | 1.5 | 105hp | 77kw | 2016-2019 |
| Important notes:Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18 | |||||||
| MAZDA | 3 Saloon (BM, BN) | S5Y8 | Diesel | 1.5 | 105hp | 77kw | 2016-2019 |
| Important notes:Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18 | |||||||
| MAZDA | 3 Saloon (BM, BN) | SHY4 | Diesel | 2.2 | 150hp | 110kw | 2013-2019 |
| Important notes:Braking / Drive Dynamics: for vehicles with ABS;Construction year from: 201503;Fitting Position: Rear Axle;Rim Size [in]: 18 | |||||||
| MAZDA | 3 Saloon (BM, BN) | SHY6 | Diesel | 2.2 | 150hp | 110kw | 2013-2019 |
| Important notes:Braking / Drive Dynamics: for vehicles with ABS;Construction year from: 201503;Fitting Position: Rear Axle;Rim Size [in]: 18 | |||||||
| MAZDA | 3 Saloon (BM_, BN_) | P5Y1 | Petrol | 1.5 | 100hp | 74kw | 2014-2019 |
| Important notes:Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18 | |||||||
| MAZDA | 3 Saloon (BM_, BN_) | P5Y1 | Petrol | 1.5 | 120hp | 88kw | 2013-2019 |
| Important notes:Construction year from: 201409;Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18 | |||||||
| MAZDA | 3 Saloon (BM_, BN_) | P5Y4 | Petrol | 1.5 | 100hp | 74kw | 2014-2019 |
| Important notes:Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18 | |||||||
| MAZDA | 3 Saloon (BM_, BN_) | P5Y4 | Petrol | 1.5 | 120hp | 88kw | 2013-2019 |
| Important notes:Construction year from: 201409;Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18 | |||||||
| MAZDA | 3 Saloon (BM_, BN_) | P5Y5 | Petrol | 1.5 | 100hp | 74kw | 2014-2019 |
| Important notes:Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18 | |||||||
| MAZDA | 3 Saloon (BM_, BN_) | P5Y5 | Petrol | 1.5 | 120hp | 88kw | 2013-2019 |
| Important notes:Construction year from: 201409;Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18 | |||||||
| MAZDA | 3 Saloon (BM_, BN_) | P5Z3 | Petrol | 1.5 | 100hp | 74kw | 2014-2019 |
| Important notes:Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18 | |||||||
| MAZDA | 3 Saloon (BM_, BN_) | P5Z3 | Petrol | 1.5 | 120hp | 88kw | 2013-2019 |
| Important notes:Construction year from: 201409;Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18 | |||||||
| MAZDA | 3 Saloon (BM_, BN_) | PEX2 | Petrol | 2.0 | 165hp | 121kw | 2014-2019 |
| Important notes:Fitting Position: Rear Axle;Rim Size [in]: 18;Vehicle Equipment: for vehicles with start-stop function | |||||||
| MAZDA | 3 Saloon (BM_, BN_) | PEXL | Petrol | 2.0 | 120hp | 88kw | 2013-2019 |
| Important notes:Construction year from: 201409;Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18;Vehicle Equipment: for vehicles without start-stop function | |||||||
| MAZDA | 3 Saloon (BM_, BN_) | PEY5 | Petrol | 2.0 | 120hp | 88kw | 2013-2019 |
| Important notes:Construction year from: 201409;Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18;Vehicle Equipment: for vehicles without start-stop function | |||||||
| MAZDA | 3 Saloon (BM_, BN_) | PEY5 | Petrol | 2.0 | 153hp | 112kw | 2015-2016 |
| Important notes:Fitting Position: Rear Axle;Rim Size [in]: 18;Vehicle Equipment: for vehicles with start-stop function | |||||||
| MAZDA | 3 Saloon (BM_, BN_) | PEY5 | Petrol | 2.0 | 155hp | 114kw | 2013-2019 |
| Important notes:Construction year from: 201409;Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18;Vehicle Equipment: for vehicles without start-stop function | |||||||
| MAZDA | 3 Saloon (BM_, BN_) | PEY5 | Petrol | 2.0 | 165hp | 121kw | 2014-2019 |
| Important notes:Fitting Position: Rear Axle;Rim Size [in]: 18;Vehicle Equipment: for vehicles with start-stop function | |||||||
| MAZDA | 3 Saloon (BM_, BN_) | PEY7 | Petrol | 2.0 | 120hp | 88kw | 2013-2019 |
| Important notes:Construction year from: 201409;Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18;Vehicle Equipment: for vehicles without start-stop function | |||||||
| MAZDA | 3 Saloon (BM_, BN_) | PEY7 | Petrol | 2.0 | 150hp | 110kw | 2013-2016 |
| Important notes:Construction year from: 201409;Fitting Position: Rear Axle;Rim Size [in]: 18 | |||||||
| MAZDA | 3 Saloon (BM_, BN_) | PEY7 | Petrol | 2.0 | 155hp | 114kw | 2013-2019 |
| Important notes:Construction year from: 201409;Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18;Vehicle Equipment: for vehicles without start-stop function | |||||||
| MAZDA | 3 Saloon (BM_, BN_) | PEY7 | Petrol | 2.0 | 165hp | 121kw | 2014-2019 |
| Important notes:Fitting Position: Rear Axle;Rim Size [in]: 18;Vehicle Equipment: for vehicles with start-stop function | |||||||
| MAZDA | 3 Saloon (BM_, BN_) | S5Y7 | Diesel | 1.5 | 105hp | 77kw | 2016-2019 |
| Important notes:Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18 | |||||||
| MAZDA | 3 Saloon (BM_, BN_) | S5Y8 | Diesel | 1.5 | 105hp | 77kw | 2016-2019 |
| Important notes:Construction year from: 201609;Fitting Position: Rear Axle;Rim Size [in]: 18 | |||||||
| MAZDA | 3 Saloon (BM_, BN_) | SHY4 | Diesel | 2.2 | 150hp | 110kw | 2013-2019 |
| Important notes:Braking / Drive Dynamics: for vehicles with ABS;Construction year from: 201503;Fitting Position: Rear Axle;Rim Size [in]: 18 | |||||||
| MAZDA | 3 Saloon (BM_, BN_) | SHY6 | Diesel | 2.2 | 150hp | 110kw | 2013-2019 |
| Important notes:Braking / Drive Dynamics: for vehicles with ABS;Construction year from: 201503;Fitting Position: Rear Axle;Rim Size [in]: 18 | |||||||
| MAZDA | 6 Estate (GJ, GL) | PE-VPR | Petrol | 2.0 | 155hp | 114kw | 2012-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | 6 Estate (GJ, GL) | PEXB | Petrol | 2.0 | 146hp | 107kw | 2013-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | 6 Estate (GJ, GL) | PEXB | Petrol | 2.0 | 165hp | 121kw | 2013-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | 6 Estate (GJ, GL) | PEXL | Petrol | 2.0 | 146hp | 107kw | 2013-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | 6 Estate (GJ, GL) | PEXL | Petrol | 2.0 | 165hp | 121kw | 2013-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | 6 Estate (GJ, GL) | PEY5 | Petrol | 2.0 | 146hp | 107kw | 2013-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | 6 Estate (GJ, GL) | PEY5 | Petrol | 2.0 | 165hp | 121kw | 2013-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | 6 Estate (GJ, GL) | PEY7 | Petrol | 2.0 | 146hp | 107kw | 2013-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | 6 Estate (GJ, GL) | PEY7 | Petrol | 2.0 | 155hp | 114kw | 2012-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | 6 Estate (GJ, GL) | PEY7 | Petrol | 2.0 | 165hp | 121kw | 2013-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | 6 Estate (GJ, GL) | PY-Y8 | Petrol | 2.5 | 192hp | 141kw | 2012-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | 6 Estate (GJ, GL) | PY-ZA | Petrol | 2.5 | 192hp | 141kw | 2012-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | 6 Estate (GJ, GL) | PYY1 | Petrol | 2.5 | 185hp | 136kw | 2012-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | 6 Estate (GJ, GL) | PYY1 | Petrol | 2.5 | 192hp | 141kw | 2012-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | 6 Estate (GJ, GL) | PYY3 | Petrol | 2.5 | 185hp | 136kw | 2012-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | 6 Estate (GJ, GL) | PYZ8 | Petrol | 2.5 | 194hp | 143kw | 2018-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | 6 Estate (GJ, GL) | PYZC | Petrol | 2.5 | 194hp | 143kw | 2018-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | 6 Estate (GJ, GL) | SH-VPTR | Diesel | 2.2 | 175hp | 129kw | 2014-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | 6 Estate (GJ, GL) | SHY1 | Diesel | 2.2 | 150hp | 110kw | 2012-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | 6 Estate (GJ, GL) | SHY4 | Diesel | 2.2 | 150hp | 110kw | 2012-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | 6 Estate (GJ, GL) | SHY4 | Diesel | 2.2 | 175hp | 129kw | 2012-2018 |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | 6 Estate (GJ, GL) | SHY6 | Diesel | 2.2 | 150hp | 110kw | 2012-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | 6 Estate (GJ, GL) | SHY6 | Diesel | 2.2 | 175hp | 129kw | 2012-2018 |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | 6 Estate (GJ, GL) | SHY8 | Diesel | 2.2 | 150hp | 110kw | 2012-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | 6 Saloon (GJ, GL) | PE-VPR | Petrol | 2.0 | 155hp | 114kw | 2012-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | 6 Saloon (GJ, GL) | PEXB | Petrol | 2.0 | 146hp | 107kw | 2013-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | 6 Saloon (GJ, GL) | PEXB | Petrol | 2.0 | 165hp | 121kw | 2013-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | 6 Saloon (GJ, GL) | PEXL | Petrol | 2.0 | 146hp | 107kw | 2013-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | 6 Saloon (GJ, GL) | PEXL | Petrol | 2.0 | 150hp | 110kw | 2012-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | 6 Saloon (GJ, GL) | PEXL | Petrol | 2.0 | 165hp | 121kw | 2013-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | 6 Saloon (GJ, GL) | PEY5 | Petrol | 2.0 | 146hp | 107kw | 2013-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | 6 Saloon (GJ, GL) | PEY5 | Petrol | 2.0 | 155hp | 114kw | 2012-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | 6 Saloon (GJ, GL) | PEY5 | Petrol | 2.0 | 165hp | 121kw | 2013-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | 6 Saloon (GJ, GL) | PEY7 | Petrol | 2.0 | 146hp | 107kw | 2013-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | 6 Saloon (GJ, GL) | PEY7 | Petrol | 2.0 | 150hp | 110kw | 2012-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | 6 Saloon (GJ, GL) | PEY7 | Petrol | 2.0 | 155hp | 114kw | 2012-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | 6 Saloon (GJ, GL) | PEY7 | Petrol | 2.0 | 165hp | 121kw | 2013-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | 6 Saloon (GJ, GL) | PY-VPR | Petrol | 2.5 | 188hp | 138kw | 2012-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | 6 Saloon (GJ, GL) | PY-Y8 | Petrol | 2.5 | 192hp | 141kw | 2013-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | 6 Saloon (GJ, GL) | PY-ZA | Petrol | 2.5 | 192hp | 141kw | 2013-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | 6 Saloon (GJ, GL) | PYY1 | Petrol | 2.5 | 188hp | 138kw | 2012-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | 6 Saloon (GJ, GL) | PYY1 | Petrol | 2.5 | 192hp | 141kw | 2013-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | 6 Saloon (GJ, GL) | SH-VPTR | Diesel | 2.2 | 175hp | 129kw | 2014-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | 6 Saloon (GJ, GL) | SHY1 | Diesel | 2.2 | 150hp | 110kw | 2012-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | 6 Saloon (GJ, GL) | SHY1 | Diesel | 2.2 | 175hp | 129kw | 2012-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | 6 Saloon (GJ, GL) | SHY4 | Diesel | 2.2 | 150hp | 110kw | 2012-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | 6 Saloon (GJ, GL) | SHY6 | Diesel | 2.2 | 150hp | 110kw | 2012-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | 6 Saloon (GJ, GL) | SHY8 | Diesel | 2.2 | 150hp | 110kw | 2012-now |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | CX-5 (KE, GH) | PEY4 | Petrol | 2.0 | 154hp | 113kw | 2015-2017 |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | CX-5 (KE, GH) | PEY4 | Petrol | 2.0 | 155hp | 114kw | 2012-2017 |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | CX-5 (KE, GH) | PEY5 | Petrol | 2.0 | 150hp | 110kw | 2012-2017 |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | CX-5 (KE, GH) | PEY5 | Petrol | 2.0 | 154hp | 113kw | 2015-2017 |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | CX-5 (KE, GH) | PEY5 | Petrol | 2.0 | 155hp | 114kw | 2012-2017 |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | CX-5 (KE, GH) | PEY5 | Petrol | 2.0 | 156hp | 115kw | 2012-2017 |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | CX-5 (KE, GH) | PEY6 | Petrol | 2.0 | 165hp | 121kw | 2011-2017 |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | CX-5 (KE, GH) | PEY7 | Petrol | 2.0 | 156hp | 115kw | 2012-2017 |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | CX-5 (KE, GH) | PEY7 | Petrol | 2.0 | 165hp | 121kw | 2011-2017 |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | CX-5 (KE, GH) | PY-VPS | Petrol | 2.5 | 188hp | 138kw | 2013-2017 |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | CX-5 (KE, GH) | SH-VPTS | Diesel | 2.2 | 175hp | 129kw | 2012-2017 |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | CX-5 (KE, GH) | SHY1 | Diesel | 2.2 | 150hp | 110kw | 2012-2017 |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | CX-5 (KE, GH) | SHY1 | Diesel | 2.2 | 175hp | 129kw | 2012-2017 |
| Important notes:Fitting Position: Rear Axle | |||||||
| MAZDA | CX-5 (KE, GH) | SHY4 | Diesel | 2.2 | 150hp | 110kw | 2012-2017 |
| Important notes:Fitting Position: Rear Axle | |||||||
SIMILAR PRODUCTS FOR YOUR VEHICLE
Wheel Bearing Kit
Art-Nr: 83101370
Weight [kg]: 2.945 kg
Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub
Bearing Type: Angular Ball Bearing
Sealing lip material: NBR (nitrile butadiene rubber)
Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Supplementary Article/Info 2: with wheel hub
Supplementary Article/Info 2: with ABS sensor ring
Fitting Position: Rear Axle Right
Fitting Position: Rear Axle Left
Supplementary Article/Info 2: for headlamp cleaning system
Outer diameter [mm]: 139 mm
Width [mm]: 139 mm
$56.62
no VAT req.
Available: 4
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Wheel Bearing Kit
Art-Nr: 101370
Bearing Type: Angular Ball Bearing
Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub
Weight [kg]: 2.945 kg
Sealing lip material: NBR (nitrile butadiene rubber)
Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Supplementary Article/Info 2: with ABS sensor ring
Supplementary Article/Info 2: with wheel hub
Fitting Position: Rear Axle Right
Fitting Position: Rear Axle Left
Supplementary Article/Info 2: for headlamp cleaning system
Outer diameter [mm]: 139 mm
Width [mm]: 139 mm
$58.58
no VAT req.
Available: 4
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Wheel Bearing Kit
Art-Nr: ADM58349
Weight [kg]: 3.09 kg
Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub
Bearing Type: Angular Ball Bearing
Sealing lip material: NBR (nitrile butadiene rubber)
Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Supplementary Article/Info 2: with ABS sensor ring
Supplementary Article/Info 2: with wheel hub
Fitting Position: Rear Axle Right
Fitting Position: Rear Axle Left
Supplementary Article/Info 2: for headlamp cleaning system
Outer diameter [mm]: 139 mm
Width [mm]: 139 mm
$56.62
no VAT req.
Available: 4
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Wheel Bearing Kit
Art-Nr: 853050245
Supplementary Article/Info 2: with integrated ABS sensor
Outer diameter [mm]: 139 mm
Rim Hole Number: 5 -Hole
$192.12
no VAT req.
Available: 10+
Special Order
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
?
Handling time: About 30 business day(s)
Handling Time: About 30 business day(s)
The item should be shipped within 15 business day(s) of receiving cleared payment.
?
The item should be shipped within 30 business day(s) of receiving cleared payment.
Add to wishlist
Wheel Hub
Art-Nr: 9400281
Thread Size: M12x1,5
Supplementary Article/Info 2: with integrated ABS sensor
Rim Hole Number: 5 -Hole
Outer diameter [mm]: 138,7 mm
Mounting bores distance [mm]: 114,3 mm
Fitting Position: Rear Axle
$58.23
no VAT req.
Available: 10
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
Wheel Bearing Kit
Art-Nr: R17064
Width 1 [mm]: 93,1 mm
Weight [g]: 3112 g
Outer diameter 1 [mm]: 139 mm
Inner diameter 1 [mm]: 0 mm
$84.94
no VAT req.
Available: 4
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
Wheel Bearing Kit
Art-Nr: 5500298
Supplementary Article/Info 2: with integrated ABS sensor
Rim Hole Number: 5 -Hole
Outer diameter [mm]: 82,88 mm
Flange Ø [mm]: 138,69 mm
$41.98
no VAT req.
Available: 1
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
Wheel Bearing Kit
Art-Nr: VKBA7649
Supplementary Article/Info 2: with integrated ABS sensor
Rim Hole Number: 5 -Hole
Outer diameter [mm]: 82.88 mm
Flange Ø [mm]: 138.69 mm
$112.34
no VAT req.
Available: 1
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
Wheel Hub
Art-Nr: 0582CX5R
Weight [kg]: 3,25 kg
Quantity: 1
Packaging width [cm]: 13,9 cm
Packaging length [cm]: 13,9 cm
Packaging height [cm]: 11,2 cm
Fitting Position: Rear Axle left and right
Drive Type: Front Wheel Drive
$70.24
no VAT req.
Available: 1
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
Wheel Bearing Kit
Art-Nr: KLT-MZ-056
Supplementary Article/Info 2: with wheel hub
Supplementary Article/Info 2: with wheel studs
Rim Size [in]: 18 Inch
Fitting Position: Rear Axle Right
Fitting Position: Rear Axle Left
Fitting Position: Rear Axle
$43.50
no VAT req.
Available: 5
Handling time: About 10 business day(s)
Handling Time: About 10 business day(s)
?
The item should be shipped within 10 business day(s) of receiving cleared payment.
Add to wishlist
ACKOJAP Wheel / Wheel Fastening
Wheel Nut
Art-Nr: A32-0180
Spanner Size: 21
Fitting Position: Front Axle
Fitting Position: Rear Axle
Internal Thread [mm]: M12 x 1,5 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$3.41
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Wheel Bearing Kit
Art-Nr: A32-0267
Mounting bores distance [mm]: 63 mm
Braking / Drive Dynamics: for vehicles with ABS
Outer diameter [mm]: 140 mm
Fitting Position: Rear Axle
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$71.68
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Wheel Bearing Kit
Art-Nr: A32-0272
Outer diameter [mm]: 138 mm
Supplementary Article/Info 2: with integrated magnetic sensor ring
Mounting bores distance [mm]: 61.5 mm
Fitting Position: Front Axle
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$42.55
no VAT req.
Available: 6
Available: 6
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Wheel Bearing Kit
Art-Nr: A38-0088
for OE number: 43202-72B00
Fitting Position: Rear Axle
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$34.73
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Wheel Bearing Kit
Art-Nr: A38-0089
for OE number: 40210-33P07
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$23.36
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Wheel Bearing Kit
Art-Nr: A52-0046
Fitting Position: Rear Axle
for OE number: 52710-22500
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$29.39
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Wheel Bearing Kit
Art-Nr: A52-0053
for OE number: 51713-21100_kit
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$16.07
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Wheel Bearing Kit
Art-Nr: A52-0337
Fitting Position: Front Axle
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$48.33
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Wheel Bearing Kit
Art-Nr: A53-0104
Outer diameter 1 [mm]: 73 mm
Width [mm]: 20 mm
Outer diameter 2 [mm]: 63 mm
Inner diameter 2 [mm]: 37 mm
Inner diameter 1 [mm]: 45 mm
Width [mm]: 17 mm
Fitting Position: Front Axle
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$19.93
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Wheel Bearing Kit
Art-Nr: A70-0127
Fitting Position: Rear Axle
Width [mm]: 81 mm
Outer diameter [mm]: 135 mm
Braking / Drive Dynamics: for vehicles with ABS
for OE number: 42450-52021
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$54.88
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
