Temporarily unavailable
$0.00
Have questions about this item?
You can pay for your order using any of these types of cards: Visa, MasterCard; as well as through these payment systems: PayPal and Bank transfer. All orders need to be prepaid to start processing. The parts are not reserved until the payment is received.
We provide worldwide shipping, but some parts cannot be processed in an automatic way. In all those cases the manager will contact you and will offer special delivery.

Brake Disc

Art-Nr: A32-40012

ACKOJAP
Supplier: ACKOJAP

Product info

Rim Hole Number:
5 -Hole
Outer diameter [mm]:
265 mm
Minimum thickness [mm]:
7 mm
Height [mm]:
39 mm
Fitting Position:
Rear Axle
Centering Diameter [mm]:
68 mm
Brake Disc Type:
Solid
Brake Disc Thickness [mm]:
9 mm
Brake Disc Hub Height [mm]:
30 mm
Bolt Hole Circle Ø [mm]:
114,3 mm
Additional Info:
In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
EAN:
4062375262458
Category:
Brake Disc
Condition:
new
Item Number:
A3240012
Brand
Code
A.B.S.
08.C653.11
A.B.S.
18383
ACKOJAP
A32-40012
AP
15098 V
ASHIKA
61-03-334C
ATE
24.0109-0181.1
BLUE PRINT
ADM543131
BORG & BECK
BBD5382
BOSCH
0 986 479 C26
BRECO
BV 6090
BREMBO
08.C653.11
BSF
11902
CAR
142.1872
COMLINE
ADC0477
DELPHI
BG4707C
EUROBRAKE
5815313283
EUROBRAKE
5815203283
FEBI BILSTEIN
108513
FIT
FR0669
FREMAX
BD-3564
HELLA
8DD 355 120-461
HELLA PAGID
8DD 355 120-461
HERTH+BUSS JAKOPARTS
J3313041
JAPANPARTS
DP-334C
JAPKO
61334C
JURATEK
MAZ137
KAMOKA
103505
KAVO PARTS
BR-4792-C
LPR
M5042P
MAZDA
B45G-26-251A
MAZDA
BJS7-26-251A
MAZDA
BJS7-26-251B
METZGER
6110799
MEYLE
35-15 523 0019/PD
MINTEX
MDC2605
NATIONAL
NBD1909
NIPPARTS
N3313043
NISSHINBO
ND5034
NK
313283
NK
203283
NPS
M331A37
NiBK
RN1565
OPEN PARTS
BDA2728.10
OPTIMAL
BS-9440C
PAGID
55677
QUARO
QD8641
RAICAM
RD01229
ST-TEMPLIN
53.111.33250
ST-TEMPLIN
53.110.33250
SWAG
33 10 7069
TEXTAR
92267703
VALEO
197562
VILLAR
628.2398
sbs
1815313283
sbs
1815203283
Brand Model Engine code Fuel Displacement HP KW Year
MAZDA3 (BM, BN)P5Y1Petrol1.5100hp74kw2013-2019
Important notes: Engine Number: 31232
MAZDA3 (BM, BN)P5Y1Petrol1.5120hp88kw2013-2019
Important notes: Engine Number: 31224; Engine Number: 31227; Engine Number: 31232
MAZDA3 (BM, BN)P5Y4Petrol1.5100hp74kw2013-2019
Important notes: Engine Number: 31232
MAZDA3 (BM, BN)P5Y4Petrol1.5120hp88kw2013-2019
Important notes: Engine Number: 31224; Engine Number: 31227; Engine Number: 31232
MAZDA3 (BM, BN)P5Y5Petrol1.5100hp74kw2013-2019
Important notes: Engine Number: 31232
MAZDA3 (BM, BN)P5Y5Petrol1.5120hp88kw2013-2019
Important notes: Engine Number: 31224; Engine Number: 31227; Engine Number: 31232
MAZDA3 (BM, BN)P5Z3Petrol1.5100hp74kw2013-2019
Important notes: Engine Number: 31232
MAZDA3 (BM, BN)P5Z3Petrol1.5120hp88kw2013-2019
Important notes: Engine Number: 31224; Engine Number: 31227; Engine Number: 31232
MAZDA3 (BM, BN)PEX2Petrol2.0165hp121kw2013-2019
Important notes: Engine Number: 28015; Engine Number: 28017; Engine Number: 31233
MAZDA3 (BM, BN)PEXLPetrol2.0120hp88kw2013-2019
Important notes: Engine Number: 28015; Engine Number: 28017
MAZDA3 (BM, BN)PEXLPetrol2.0165hp121kw2013-2019
Important notes: Engine Number: 28015; Engine Number: 28017; Engine Number: 31233
MAZDA3 (BM, BN)PEY5Petrol2.0120hp88kw2013-2019
Important notes: Engine Number: 28015; Engine Number: 28017
MAZDA3 (BM, BN)PEY5Petrol2.0155hp114kw2013-2019
MAZDA3 (BM, BN)PEY5Petrol2.0165hp121kw2013-2019
Important notes: Engine Number: 28015; Engine Number: 28017; Engine Number: 31233
MAZDA3 (BM, BN)PEY7Petrol2.0120hp88kw2013-2019
Important notes: Engine Number: 28015; Engine Number: 28017
MAZDA3 (BM, BN)PEY7Petrol2.0150hp110kw2013-2016
MAZDA3 (BM, BN)PEY7Petrol2.0155hp114kw2013-2019
MAZDA3 (BM, BN)PEY7Petrol2.0165hp121kw2013-2019
Important notes: Engine Number: 28015; Engine Number: 28017; Engine Number: 31233
MAZDA3 (BM, BN)S5Y7Diesel1.5105hp77kw2016-2019
MAZDA3 (BM, BN)S5Y8Diesel1.5105hp77kw2016-2019
MAZDA3 (BM, BN)SHY4Diesel2.2150hp110kw2013-2019
MAZDA3 (BM, BN)SHY6Diesel2.2150hp110kw2013-2019
MAZDA3 (BM, BN)Z6Y1Petrol1.6105hp77kw2013-2019
MAZDA3 (BM, BN)Z6Y3Petrol1.6105hp77kw2013-2019
MAZDA3 Hatchback (BP)HFY1Petrol/Electric2.0179hp132kw2019-now
MAZDA3 Hatchback (BP)P5X4Petrol1.5120hp88kw2018-now
MAZDA3 Hatchback (BP)PEXNPetrol/Electric2.0122hp90kw2018-now
Important notes: Engine Number: 36987
MAZDA3 Hatchback (BP)PEXNPetrol2.0155hp114kw2018-now
MAZDA3 Hatchback (BP)PEXPPetrol2.0155hp114kw2018-now
MAZDA3 Hatchback (BP)S8Y1Diesel1.8116hp85kw2019-now
MAZDA3 Hatchback (BP)S8Y2Diesel1.8116hp85kw2019-now
MAZDA3 Hatchback Van (BM)P5Y1Petrol1.5101hp74kw2015-2016
MAZDA3 Hatchback Van (BM)PEX2Petrol2.0165hp121kw2015-2016
MAZDA3 Hatchback Van (BM)PEY7Petrol2.0120hp88kw2015-2016
MAZDA3 Hatchback Van (BM)SHY4Diesel2.2150hp110kw2015-2016
MAZDA3 Saloon (BM, BN)P5Y1Petrol1.5100hp74kw2014-2019
Important notes: Engine Number: 31232
MAZDA3 Saloon (BM, BN)P5Y1Petrol1.5120hp88kw2013-2019
Important notes: Engine Number: 31224; Engine Number: 31227; Engine Number: 31232
MAZDA3 Saloon (BM, BN)P5Y4Petrol1.5100hp74kw2014-2019
Important notes: Engine Number: 31232
MAZDA3 Saloon (BM, BN)P5Y4Petrol1.5120hp88kw2013-2019
Important notes: Engine Number: 31224; Engine Number: 31227; Engine Number: 31232
MAZDA3 Saloon (BM, BN)P5Y5Petrol1.5100hp74kw2014-2019
Important notes: Engine Number: 31232
MAZDA3 Saloon (BM, BN)P5Y5Petrol1.5120hp88kw2013-2019
Important notes: Engine Number: 31224; Engine Number: 31227; Engine Number: 31232
MAZDA3 Saloon (BM, BN)P5Z3Petrol1.5100hp74kw2014-2019
Important notes: Engine Number: 31232
MAZDA3 Saloon (BM, BN)P5Z3Petrol1.5120hp88kw2013-2019
Important notes: Engine Number: 31224; Engine Number: 31227; Engine Number: 31232
MAZDA3 Saloon (BM, BN)PEX2Petrol2.0165hp121kw2014-2019
Important notes: Engine Number: 31233
MAZDA3 Saloon (BM, BN)PEXLPetrol2.0120hp88kw2013-2019
Important notes: Engine Number: 28015; Engine Number: 28017
MAZDA3 Saloon (BM, BN)PEY5Petrol2.0120hp88kw2013-2019
Important notes: Engine Number: 28015; Engine Number: 28017
MAZDA3 Saloon (BM, BN)PEY5Petrol2.0153hp112kw2015-2016
MAZDA3 Saloon (BM, BN)PEY5Petrol2.0155hp114kw2013-2019
MAZDA3 Saloon (BM, BN)PEY5Petrol2.0165hp121kw2014-2019
Important notes: Engine Number: 31233
MAZDA3 Saloon (BM, BN)PEY7Petrol2.0120hp88kw2013-2019
Important notes: Engine Number: 28015; Engine Number: 28017
MAZDA3 Saloon (BM, BN)PEY7Petrol2.0150hp110kw2013-2016
MAZDA3 Saloon (BM, BN)PEY7Petrol2.0155hp114kw2013-2019
MAZDA3 Saloon (BM, BN)PEY7Petrol2.0165hp121kw2014-2019
Important notes: Engine Number: 31233
MAZDA3 Saloon (BM, BN)S5Y7Diesel1.5105hp77kw2016-2019
MAZDA3 Saloon (BM, BN)S5Y8Diesel1.5105hp77kw2016-2019
MAZDA3 Saloon (BM, BN)SHY4Diesel2.2150hp110kw2013-2019
Important notes: Engine Number: 31259
MAZDA3 Saloon (BM, BN)SHY6Diesel2.2150hp110kw2013-2019
Important notes: Engine Number: 31259
MAZDA3 Saloon (BM, BN)Z6Y1Petrol1.6105hp77kw2013-2019
MAZDA3 Saloon (BM, BN)Z6Y3Petrol1.6105hp77kw2013-2019
MAZDA3 Saloon (BM_, BN_)P5Y1Petrol1.5100hp74kw2014-2019
Important notes: Engine Number: 31232
MAZDA3 Saloon (BM_, BN_)P5Y1Petrol1.5120hp88kw2013-2019
Important notes: Engine Number: 31224; Engine Number: 31227; Engine Number: 31232
MAZDA3 Saloon (BM_, BN_)P5Y4Petrol1.5100hp74kw2014-2019
Important notes: Engine Number: 31232
MAZDA3 Saloon (BM_, BN_)P5Y4Petrol1.5120hp88kw2013-2019
Important notes: Engine Number: 31224; Engine Number: 31227; Engine Number: 31232
MAZDA3 Saloon (BM_, BN_)P5Y5Petrol1.5100hp74kw2014-2019
Important notes: Engine Number: 31232
MAZDA3 Saloon (BM_, BN_)P5Y5Petrol1.5120hp88kw2013-2019
Important notes: Engine Number: 31224; Engine Number: 31227; Engine Number: 31232
MAZDA3 Saloon (BM_, BN_)P5Z3Petrol1.5100hp74kw2014-2019
Important notes: Engine Number: 31232
MAZDA3 Saloon (BM_, BN_)P5Z3Petrol1.5120hp88kw2013-2019
Important notes: Engine Number: 31224; Engine Number: 31227; Engine Number: 31232
MAZDA3 Saloon (BM_, BN_)PEX2Petrol2.0165hp121kw2014-2019
Important notes: Engine Number: 31233
MAZDA3 Saloon (BM_, BN_)PEXLPetrol2.0120hp88kw2013-2019
Important notes: Engine Number: 28015; Engine Number: 28017
MAZDA3 Saloon (BM_, BN_)PEY5Petrol2.0120hp88kw2013-2019
Important notes: Engine Number: 28015; Engine Number: 28017
MAZDA3 Saloon (BM_, BN_)PEY5Petrol2.0153hp112kw2015-2016
MAZDA3 Saloon (BM_, BN_)PEY5Petrol2.0155hp114kw2013-2019
MAZDA3 Saloon (BM_, BN_)PEY5Petrol2.0165hp121kw2014-2019
Important notes: Engine Number: 31233
MAZDA3 Saloon (BM_, BN_)PEY7Petrol2.0120hp88kw2013-2019
Important notes: Engine Number: 28015; Engine Number: 28017
MAZDA3 Saloon (BM_, BN_)PEY7Petrol2.0150hp110kw2013-2016
MAZDA3 Saloon (BM_, BN_)PEY7Petrol2.0155hp114kw2013-2019
MAZDA3 Saloon (BM_, BN_)PEY7Petrol2.0165hp121kw2014-2019
Important notes: Engine Number: 31233
MAZDA3 Saloon (BM_, BN_)S5Y7Diesel1.5105hp77kw2016-2019
MAZDA3 Saloon (BM_, BN_)S5Y8Diesel1.5105hp77kw2016-2019
MAZDA3 Saloon (BM_, BN_)SHY4Diesel2.2150hp110kw2013-2019
Important notes: Engine Number: 31259
MAZDA3 Saloon (BM_, BN_)SHY6Diesel2.2150hp110kw2013-2019
Important notes: Engine Number: 31259
MAZDA3 Saloon (BM_, BN_)Z6Y1Petrol1.6105hp77kw2013-2019
MAZDA3 Saloon (BM_, BN_)Z6Y3Petrol1.6105hp77kw2013-2019
MAZDA3 Saloon (BP_)HFY1Petrol/Electric2.0179hp132kw2019-now
MAZDA3 Saloon (BP_)P5X4Petrol1.5120hp88kw2018-now
MAZDA3 Saloon (BP_)PEXNPetrol/Electric2.0122hp90kw2018-now
MAZDA3 Saloon (BP_)S8Y1Diesel1.8116hp85kw2019-now
MAZDA3 Saloon (BP_)S8Y2Diesel1.8116hp85kw2019-now
MAZDACX-30 (DM)HFY1Petrol/Electric2.0179hp132kw2019-now
MAZDACX-30 (DM)PEXNPetrol/Electric2.0122hp90kw2019-now
MAZDACX-30 (DM)PEXNPetrol2.0156hp115kw2019-now
MAZDACX-30 (DM)PEXPPetrol2.0155hp114kw2019-now
MAZDACX-30 (DM)PEXPPetrol2.0165hp121kw2019-now
MAZDACX-30 (DM)PYZCPetrol2.5189hp139kw2019-now
MAZDACX-30 (DM)S8Y1Diesel1.8116hp85kw2019-now

SIMILAR PRODUCTS FOR YOUR VEHICLE

Brake Disc VALEO 197562 VALEO Brake Disc VALEO Art-Nr: 197562 Weight [kg]: 7.5 kg Number of mounting bores: 1 Rim Hole Number: 5 -Hole Minimum thickness [mm]: 7 mm Height [mm]: 39 mm Centering Diameter [mm]: 68 mm Brake Disc Thickness [mm]: 9 mm Outer diameter [mm]: 265 mm Brake Disc Type: Solid Fitting Position: Rear Axle Test Mark: ECE-R90
$47.39
no VAT req.
Available: 1 Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Brake Disc BOSCH 0986479C26 BOSCH Brake Disc BOSCH Art-Nr: 0986479C26 Number of Holes: 5 Brake Disc Type: Solid Brake Disc Thickness [mm]: 9 mm Outer diameter [mm]: 265 mm Centering Diameter [mm]: 68 mm Fulfils ECE norm: ECE-R90 Machining: High-carbon Surface: Coated Drill Diameter, up to [mm]: 13,3 mm Bolt Hole Circle Ø [mm]: 114,3 mm Height [mm]: 39 mm Minimum thickness [mm]: 7 mm
$22.47
no VAT req.
Available: 10+ Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Brake Disc DELPHI BG4707C DELPHI Brake Disc DELPHI Art-Nr: BG4707C Brake Disc Type: Solid Number of Holes: 5 Minimum thickness [mm]: 7 mm Brake Disc Thickness [mm]: 9 mm Centering Diameter [mm]: 68 mm Height [mm]: 39 mm Outer diameter [mm]: 265 mm Machining: Untreated Surface: Coated Supplementary Article/Info 2: without ABS sensor ring Supplementary Article/Info 2: without wheel bearing Test Mark: E1 90R-02C0100/1551
$29.15
no VAT req.
Available: 5 Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Brake Disc BLUE PRINT ADM543131 BLUE PRINT Brake Disc BLUE PRINT Art-Nr: ADM543131 Surface: Coated Centering Diameter [mm]: 68 mm Weight [kg]: 3.6 kg Minimum thickness [mm]: 7 mm Fitting Position: Rear Axle Brake Disc Type: Solid Number of mounting bores: 1 Brake Disc Thickness [mm]: 9 mm Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Bolt Hole Circle Ø [mm]: 114,3 mm Outer diameter [mm]: 265 mm Thickness [mm]: 39 mm Rim Hole Number: 5 -Hole
$24.35
no VAT req.
Available: 10 Available: 10 Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Brake Disc ATE 24.0109-0181.1 ATE Brake Disc ATE Art-Nr: 24.0109-0181.1 Surface: Coated Outer diameter [mm]: 265,0 mm Number of Holes: 5 Minimum thickness [mm]: 7,0 mm Inner diameter [mm]: 143,0 mm Height [mm]: 39,0 mm Centering Diameter [mm]: 68,0 mm Brake Disc Type: Solid Brake Disc Thickness [mm]: 9,0 mm Bore Ø [mm]: 13,0 mm Bolt Hole Circle Ø [mm]: 114,3 mm Fitting Position: Rear Axle Test Mark: E1 90R-02C0165/0927
$44.74
no VAT req.
Available: 6 Handling time: About 30 business day(s) Handling Time: About 30 business day(s)
?
The item should be shipped within 30 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Brake Disc BREMBO 08C65311 BREMBO Brake Disc BREMBO Art-Nr: 08C65311 Surface: Coated Number of Holes: 5 Minimum thickness [mm]: 7 mm Height [mm]: 39 mm Diameter [mm]: 265 mm Centering Diameter [mm]: 68 mm Brake Disc Type: Solid Brake Disc Thickness [mm]: 9 mm
$36.11
no VAT req.
Available: 4 Handling time: About 2 business day(s) Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Brake Disc ZIMMERMANN 370305520 ZIMMERMANN Brake Disc ZIMMERMANN Art-Nr: 370305520 Weight [kg]: 3,50 kg Thickness [mm]: 9 mm Surface: Coated Outer diameter [mm]: 265 mm Minimum thickness [mm]: 8 mm Hub Bore Ø [mm]: 68 mm Hole Arrangement / Number: 7/5 Height [mm]: 39 mm Brake Disc Type: Solid Bolt Hole Circle Ø 1 [mm]: 114,3 mm
$34.14
no VAT req.
Available: 2 Handling time: About 2 business day(s) Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
no image TRW Brake Disc TRW Art-Nr: DF6659 Thread Size 2: M8 Thread Size 1: 13,3 Surface: Painted Outer diameter [mm]: 265 mm Number of Holes: 5 Minimum thickness [mm]: 7 mm Height [mm]: 39 mm Colour: Black Centering Diameter [mm]: 68 mm Brake Disc Type: Solid Brake Disc Thickness [mm]: 9 mm Bolt Hole Circle Ø [mm]: 114,3 mm
$34.30
no VAT req.
Available: 1 Handling time: About 2 business day(s) Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Brake Disc MEYLE 35-155230019/PD MEYLE Brake Disc MEYLE Art-Nr: 35-155230019/PD Minimum thickness [mm]: 8 mm Fitting Position: Rear Axle Required quantity: 2 Brake Disc Type: Solid Outer diameter [mm]: 265 mm Brake Disc Thickness [mm]: 9 mm Number of Holes: 5 Height [mm]: 39 mm Bolt Hole Circle Ø [mm]: 114.3 mm Wheel Bolt Bore Ø [mm]: 13.3 mm Centering Diameter [mm]: 68 mm Additional Info: Check plug connection measuring capability via 2-channel oscilloscope and multimet, Tie rod diameter 22mm with M16 thread, Trans.ZF 6HP592/692, Mot.DC13 07 480, Upgrade available! Antiallergenic version: FP 19 004, Upgrade available! Antiallergenic version: FP 2939/1, For vehicles with sports brakes, DELCO, FORD, LEECE-NEVILLE, MOTOROLA, NIPPONDENSO, PRESTOLIT, CHEVROLET, Aerosus air suspension struts replace the original air, 120A, Diodes Avalanche (Zener), With triodiode, 50A, 4 O-ring version, MEYLE-PD brake disc with high-grade finish and brillant, SMD 04 CK - Rear position light, LED, ADR, red, 24V,, Station Wagon, Custom G appearance: Modern cutting-edge coating technology for long, strut of your vehicle and offer you maximum ride comfort, er also integrated, Type: Uno Selecta i.e., Click-in connector for flat cable, with 500mm cable, with, E Heavy Duty alternators (drive end) lasting anti-corrosion protection. No degreasing needed,, Type: Uno 45 1.0, with high durability. Security, accuracy and quality of the, reflector product match the original part., ready-to-fit. Easy rim disassembly due to coated mounting surfaces. This brand new front air suspension strut fits left side of Mercedes Benz GL-Class (X 166) vehicles with ADS (Adaptive Damping System) and Mercedes Benz ML-Class (W, Code: GM THM-R1 (A4S270/310R) 4/1 166) vehicles with ADS (Adaptive Damping System). Aerosus air struts are made of high-quality materials and are covered by a 2-year limited warranty. Each air suspension strut comes complete with air spring and shock absorber as well as the new electromagnetic control valve. All our strut modules are new, high-performance parts. Our air struts are designed for superior ride quality by adjusting quickly to different road and vehicle conditions, while offering ultimate safety and functionality. All Aerosus suspension products offer you the ultimate driving experience. Features OE-quality air suspension strut Security and durability Maximum ride comfort Adjustable to different road and vehicle conditions Safe load carrying capacity and stability Ready to install Electromagnetic control valve Thousands of satisfied customers worldwide Surface: Zink flake coated
$26.71
no VAT req.
Available: 10+ Handling time: About 15 business day(s) Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
no image TEXTAR Brake Disc TEXTAR Art-Nr: 92267703 Weight [kg]: 3,5 kg Technical Information Number: 98200 2677 0 1 PRO Surface: Coated Supplementary Article/Info 2: without wheel studs Supplementary Article/Info 2: without wheel hub Packaging width [cm]: 28,5 cm Packaging length [cm]: 30 cm Packaging height [cm]: 10 cm Outer diameter [mm]: 265 mm Minimum thickness [mm]: 7,0 mm Hole Arrangement / Number: 05/06 Height [mm]: 39,0 mm Centering Diameter [mm]: 68,0 mm Brake Disc Type: Solid Brake Disc Thickness [mm]: 9,0 mm Bolt Hole Circle Ø [mm]: 114,3 mm
$37.88
no VAT req.
Available: 2 Handling time: About 2 business day(s) Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro

ACKOJAP Brake Disc

Brake Disc ACKOJAP A52-40006 ACKOJAP Brake Disc ACKOJAP Art-Nr: A52-40006 Centering Diameter [mm]: 76 mm Minimum thickness [mm]: 8.4 mm Brake Disc Thickness [mm]: 10 mm Brake Disc Type: Solid Height [mm]: 61 mm Bolt Hole Circle Ø [mm]: 114.3 mm Rim Hole Number: 4 -Hole Outer diameter [mm]: 262 mm Brake Disc Hub Height [mm]: 51 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$19.09
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Brake Disc ACKOJAP A37-80006 ACKOJAP Brake Disc ACKOJAP Art-Nr: A37-80006 Centering Diameter [mm]: 87 mm Minimum thickness [mm]: 22.4 mm Brake Disc Thickness [mm]: 24 mm Brake Disc Type: Vented Height [mm]: 45.1 mm Bolt Hole Circle Ø [mm]: 108 mm Rim Hole Number: 6 -Hole Outer diameter [mm]: 276 mm Brake Disc Hub Height [mm]: 21,1 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$20.12
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Brake Disc ACKOJAP A32-40005 ACKOJAP Brake Disc ACKOJAP Art-Nr: A32-40005 Minimum thickness [mm]: 8 mm Brake Disc Thickness [mm]: 10 mm Brake Disc Type: Solid Height [mm]: 40.2 mm Bolt Hole Circle Ø [mm]: 114.3 mm Centering Diameter [mm]: 72 mm Fitting Position: Rear Axle Rim Hole Number: 5 -Hole Outer diameter [mm]: 280 mm Brake Disc Hub Height [mm]: 30,2 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$17.37
no VAT req.
Available: 10+ Available: 10+ Ready to Ship Handling time: About 1 business day(s) Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Brake Disc ACKOJAP A52-40004 ACKOJAP Brake Disc ACKOJAP Art-Nr: A52-40004 Centering Diameter [mm]: 76 mm Minimum thickness [mm]: 8 mm Brake Disc Thickness [mm]: 10 mm Brake Disc Type: Solid Height [mm]: 40.4 mm Bolt Hole Circle Ø [mm]: 114.3 mm Rim Hole Number: 4 -Hole Outer diameter [mm]: 258 mm Brake Disc Hub Height [mm]: 30,4 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$17.47
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Brake Disc ACKOJAP A37-40001 ACKOJAP Brake Disc ACKOJAP Art-Nr: A37-40001 Minimum thickness [mm]: 8.4 mm Brake Disc Thickness [mm]: 10 mm Brake Disc Type: Solid Height [mm]: 41 mm Bolt Hole Circle Ø [mm]: 114.3 mm Centering Diameter [mm]: 90 mm Rim Hole Number: 4 -Hole Outer diameter [mm]: 260 mm Fitting Position: Rear Axle Brake Disc Hub Height [mm]: 31 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$47.27
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Brake Disc ACKOJAP A26-80005 ACKOJAP Brake Disc ACKOJAP Art-Nr: A26-80005 Minimum thickness [mm]: 21 mm Brake Disc Thickness [mm]: 23 mm Brake Disc Type: Vented Height [mm]: 47.1 mm Bolt Hole Circle Ø [mm]: 114.3 mm Centering Diameter [mm]: 70.2 mm Fitting Position: Front Axle Rim Hole Number: 5 -Hole Outer diameter [mm]: 282 mm Brake Disc Hub Height [mm]: 24,1 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$28.92
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Brake Disc ACKOJAP A32-80001 ACKOJAP Brake Disc ACKOJAP Art-Nr: A32-80001 Minimum thickness [mm]: 22 mm Brake Disc Thickness [mm]: 24 mm Brake Disc Type: Vented Height [mm]: 48.6 mm Bolt Hole Circle Ø [mm]: 114.3 mm Centering Diameter [mm]: 72 mm Fitting Position: Front Axle Rim Hole Number: 5 -Hole Outer diameter [mm]: 258 mm Brake Disc Hub Height [mm]: 24,6 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$25.42
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Brake Disc ACKOJAP A26-80004 ACKOJAP Brake Disc ACKOJAP Art-Nr: A26-80004 Minimum thickness [mm]: 15 mm Brake Disc Thickness [mm]: 17 mm Brake Disc Type: Vented Height [mm]: 44 mm Bolt Hole Circle Ø [mm]: 100 mm Centering Diameter [mm]: 61 mm Fitting Position: Front Axle Rim Hole Number: 4 -Hole Outer diameter [mm]: 231 mm Brake Disc Hub Height [mm]: 27 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$17.70
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Brake Disc ACKOJAP A32-40008 ACKOJAP Brake Disc ACKOJAP Art-Nr: A32-40008 Centering Diameter [mm]: 55 mm Minimum thickness [mm]: 8 mm Brake Disc Thickness [mm]: 10 mm Brake Disc Type: Solid Height [mm]: 39.9 mm Bolt Hole Circle Ø [mm]: 100 mm Rim Hole Number: 4 -Hole Outer diameter [mm]: 261 mm Brake Disc Hub Height [mm]: 29,9 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$15.71
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro
Brake Disc ACKOJAP A26-80021 ACKOJAP Brake Disc ACKOJAP Art-Nr: A26-80021 Centering Diameter [mm]: 92 mm Minimum thickness [mm]: 23 mm Brake Disc Thickness [mm]: 25 mm Brake Disc Type: Vented Height [mm]: 34.5 mm Bolt Hole Circle Ø [mm]: 114.3 mm Rim Hole Number: 4 -Hole Outer diameter [mm]: 282 mm Fitting Position: Front Axle Brake Disc Hub Height [mm]: 9,5 mm Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$22.19
no VAT req.
Available: 10+ Handling time: About 20 business day(s) Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist paypal Visa Visa Electron MasterCard Maestro