$12.91
no VAT req.
Available: 10+
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
$12.91
Have questions about this item?
You can pay for your order using any of these types of cards: Visa, MasterCard; as well as through these payment systems: PayPal and Bank transfer. All orders need to be prepaid to start processing. The parts are not reserved until the payment is received.
We provide worldwide shipping, but some parts cannot be processed in an automatic way. In all those cases the manager will contact you and will offer special delivery.
Ball Joint
Art-Nr: A26-9623
Supplier:
ACKOJAP
Product info
Fitting Position:
Lower
Front Axle
Additional Info:
In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
EAN:
4062375229321
Category:
Ball Joint
Condition:
new
Item Number:
A269623
Brand
Code
4u
HN-B-11581
555
SB-H072
A.B.S.
220521
ACKOJAP
A26-9623
ASHIKA
73-04-411
ASVA
0320-CUD
AYD
9210902
BGA
SJ2506
BIRTH
CX0130
BLUE PRINT
ADH286132
BORG & BECK
BBJ5638
COMLINE
CBJ7237
CTE
CBJ01010
DELPHI
TC2629
DODA
1060230007
FAI AutoParts
SS7453
FEBEST
0320-CUD
FEBI BILSTEIN
42133
FIRST LINE
FBJ5638
FORMPART
3603017
G.U.D.
GSP401215
GSP
S080473
HERTH+BUSS JAKOPARTS
J4864014
HONDA
51220TA0A01
HONDA
51220-TA0-A02
JAPANPARTS
BJ-411
JAPKO
73411
KAMOKA
9040090
KAVO PARTS
SBJ-2012
KAWE
8500 40531
LEMFÖRDER
39159 01
LYNXauto
C1246LR
MAGNETI MARELLI
600000149470
MAPCO
51399
MASTER-SPORT GERMANY
47289S-SET-MS
MASTER-SPORT GERMANY
47289S-PCS-MS
MDR
MBJ-8411
METZGER
57026508
MEYLE
31-16 010 0004
MGA
SR5929
MONROE
LN40044
MONROE
L40531
MOOG
HO-BJ-10126
MOTAQUIP
LVSJ1114
NIPPARTS
N4864015
NK
5042611
NPS
H420A96
OCAP
0403282
PEMEBLA
JAPBJ-411
PROFIT
2301-0427
QUINTON HAZELL
QSJ3655S
RTS
93-06647
SIDEM
47289
SKF
VKDS 813009
STELLOX
52-00182-SX
SWAG
85 94 2133
TALOSA
47-07804
TENACITY
ATBHO1021
TRISCAN
8500 40531
TRW
JBJ7627
VEMA
26706
WILMINK GROUP
WG1994468
ZEKKERT
TG-5278
| Brand | Model | Engine code | Fuel | Displacement | HP | KW | Year |
| HONDA | ACCORD IX Saloon (CR) | J35Y1 | Petrol | 3.5 | 282hp | 207kw | 2012-now |
| Important notes:Model year to: 2013 | |||||||
| HONDA | ACCORD IX Saloon (CR) | J35Z2 | Petrol | 3.5 | 277hp | 204kw | 2013-now |
| Important notes:Model year to: 2013 | |||||||
| HONDA | ACCORD IX Saloon (CR) | K24W1 | Petrol | 2.4 | 189hp | 139kw | 2017-now |
| Important notes:Vehicle Production Country: Japan;Vehicle Production Country: USA | |||||||
| HONDA | ACCORD IX Saloon (CR) | K24W1 | Petrol | 2.4 | 192hp | 141kw | 2012-now |
| Important notes:Vehicle Production Country: Japan;Vehicle Production Country: USA | |||||||
| HONDA | ACCORD IX Saloon (CR) | K24W2 | Petrol | 2.4 | 173hp | 127kw | 2013-now |
| Important notes:Vehicle Production Country: Japan;Vehicle Production Country: USA | |||||||
| HONDA | ACCORD IX Saloon (CR) | K24W2 | Petrol | 2.4 | 180hp | 132kw | 2014-now |
| Important notes:Vehicle Production Country: Japan;Vehicle Production Country: USA | |||||||
| HONDA | ACCORD IX Saloon (CR) | K24W3 | Petrol | 2.4 | 180hp | 132kw | 2014-now |
| Important notes:Vehicle Production Country: Japan;Vehicle Production Country: USA | |||||||
| HONDA | ACCORD IX Saloon (CR) | K24W | Petrol | 2.4 | 175hp | 129kw | 2013-now |
| Important notes:Vehicle Production Country: Japan;Vehicle Production Country: USA | |||||||
| HONDA | ACCORD IX Saloon (CR) | K24Z3 | Petrol | 2.4 | 188hp | 138kw | 2012-now |
| Important notes:Vehicle Production Country: Japan;Vehicle Production Country: USA | |||||||
| HONDA | ACCORD IX Saloon (CR) | R20Z2 | Petrol/Ethanol | 2.0 | 155hp | 114kw | 2013-now |
| Important notes:Vehicle Production Country: Japan | |||||||
| HONDA | ACCORD IX Saloon (CR) | R20Z3 | Petrol/Ethanol | 2.0 | 155hp | 114kw | 2013-now |
| Important notes:Vehicle Production Country: Japan | |||||||
| HONDA | ACCORD VIII (CU) | N22B2 | Diesel | 2.2 | 180hp | 132kw | 2008-2015 |
| HONDA | ACCORD VIII (CU) | R20A3 | Petrol | 2.0 | 156hp | 115kw | 2008-2015 |
| HONDA | ACCORD VIII Estate (CW) | K24Z3 | Petrol | 2.4 | 201hp | 148kw | 2008-now |
| HONDA | ACCORD VIII Estate (CW) | R20A3 | Petrol | 2.0 | 156hp | 115kw | 2008-2015 |
| HONDA | CROSSTOUR I | J35Y1 | Petrol | 3.5 | 282hp | 207kw | 2012-now |
| HONDA | CROSSTOUR I | J35Z2 | Petrol | 3.5 | 275hp | 202kw | 2012-now |
| HONDA | CROSSTOUR I | K24Y2 | Petrol | 2.4 | 194hp | 143kw | 2012-now |
SIMILAR PRODUCTS FOR YOUR VEHICLE
AXLE PARTS
Art-Nr: 51220TA0A02
$106.98
no VAT req.
Special Order
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Ball Joint
Art-Nr: 85942133
Fitting Position: Lower
Weight [kg]: 0.6 kg
Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Supplementary Article/Info 2: with crown nut
Fitting Position: Front Axle Right
Fitting Position: Front Axle Left
Control/Trailing Arm Type: Control Arm
External Thread Size: M14 x 1,5
$15.51
no VAT req.
Available: 4
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Ball Joint
Art-Nr: 42133
Fitting Position: Lower
Weight [kg]: 0.6 kg
Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Supplementary Article/Info 2: with crown nut
Fitting Position: Front Axle Right
Fitting Position: Front Axle Left
Control/Trailing Arm Type: Control Arm
External Thread Size: M14 x 1,5
$16.48
no VAT req.
Available: 4
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Ball Joint
Art-Nr: ADH286132
Weight [kg]: 0.6 kg
Fitting Position: Lower
Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Supplementary Article/Info 2: with crown nut
Fitting Position: Front Axle Right
Fitting Position: Front Axle Left
Control/Trailing Arm Type: Control Arm
External Thread Size: M14 x 1,5
$16.14
no VAT req.
Available: 4
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Ball Joint
Art-Nr: 850040531
Required quantity: 2
$19.52
no VAT req.
Available: 10+
Special Order
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
?
Handling time: About 30 business day(s)
Handling Time: About 30 business day(s)
The item should be shipped within 15 business day(s) of receiving cleared payment.
?
The item should be shipped within 30 business day(s) of receiving cleared payment.
Add to wishlist
Ball Joint
Art-Nr: 0320CUD
Weight [kg]: 0,64 kg
Quantity: 4
Packaging width [cm]: 5,3 cm
Packaging length [cm]: 9,7 cm
Packaging height [cm]: 5,3 cm
Fitting Position: Lower Front Axle
$8.21
no VAT req.
Available: 1
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
Ball Joint
Art-Nr: 9040090
Outer diameter [mm]: 48,6 mm
Fitting Position: Lower
Fitting Position: Front Axle left and right
Cone Size [mm]: 19,3 mm
Cone Pitch: 1/8
$5.12
no VAT req.
Available: 1
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
Ball Joint
Art-Nr: 31-160100004
Thread Size 1: M14x1,5
Outer diameter [mm]: 49 mm
Fitting Position: Lower
Fitting Position: Front Axle Right
Fitting Position: Front Axle Left
$18.04
no VAT req.
Available: 10+
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Ball Joint
Art-Nr: JBJ7627
Thread Size: M14*1.5
Cone Pitch: 1:8
$11.63
no VAT req.
Available: 2
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
Ball Joint
Art-Nr: 5042611
$9.01
no VAT req.
Available: 3
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
ACKOJAP Ball Joint
Inner Tie Rod
Art-Nr: A26-1133
Fitting Position: Front Axle
External Thread 1 [mm]: M14 x 1,5 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$8.11
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Inner Tie Rod
Art-Nr: A32-1129
Length [mm]: 295 mm
Fitting Position: Front Axle both sides
External Thread [mm]: M14 x 1,5 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$14.28
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Inner Tie Rod
Art-Nr: A32-1131
Length [mm]: 160 mm
Fitting Position: Front Axle both sides
External Thread [mm]: M18x15,5 mm
External Thread 1 [mm]: M14x1,5 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$14.18
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Inner Tie Rod
Art-Nr: A37-1102
Colour: Grey
Length [mm]: 355 mm
Weight [kg]: 0.72 kg
Surface: Phosphatized
Material: Steel
Fitting Position: Front Axle both sides
External Thread [mm]: M14 x 1,5 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$12.66
no VAT req.
Available: 7
Available: 7
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Inner Tie Rod
Art-Nr: A37-1139
Weight [kg]: 0.523 kg
Length [mm]: 330 mm
Fitting Position: Front Axle
Thread Length [mm]: 19 mm
External Thread [mm]: M 12 x 1,25 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$11.21
no VAT req.
Available: 10
Available: 10
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Inner Tie Rod
Art-Nr: A37-1140
Thread Length [mm]: 56 mm
Weight [kg]: 0.68 kg
Length [mm]: 338 mm
Fitting Position: Front Axle
Fitting Position: Right
Fitting Position: Left
External Thread 1 [mm]: M14 x 1,5 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$12.02
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Ball Joint
Art-Nr: A38-1199
Cone Size [mm]: 16 mm
Fitting Position: Front Axle Right
Fitting Position: Front Axle Left
Fitting Position: Lower
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$12.94
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Inner Tie Rod
Art-Nr: A52-1178
Weight [kg]: 0.61 kg
Surface: Phosphatized
Material: Steel
Colour: Grey
Length [mm]: 243 mm
Fitting Position: Front Axle both sides
External Thread [mm]: M16 x 1,5 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$9.89
no VAT req.
Available: 10
Available: 10
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Tie Rod End
Art-Nr: A52-1219
Fitting Position: Front Axle
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$12.99
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
Inner Tie Rod
Art-Nr: A53-0119
Fitting Position: Front Axle
Fitting Position: Left
External Thread 1 [mm]: M14 x 1,5 mm
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$9.86
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 20 business day(s)
Handling Time: About 20 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 20 business day(s) of receiving cleared payment.
Add to wishlist
