Select vehicle

Make
  • ALFA ROMEO
  • AUDI
  • BMW
  • CADILLAC
  • CHEVROLET
  • CHRYSLER
  • CITROËN
  • DACIA
  • DAEWOO
  • DAIHATSU
  • DODGE
  • FIAT
  • FORD
  • HONDA
  • HUMMER
  • HYUNDAI
  • INFINITI
  • ISUZU
  • JAGUAR
  • JEEP
  • KIA
  • LADA
  • LANCIA
  • LAND ROVER
  • LEXUS
  • MASERATI
  • MAZDA
  • MERCEDES-BENZ
  • MG
  • MINI
  • MITSUBISHI
  • NISSAN
  • OPEL
  • PEUGEOT
  • PORSCHE
  • RENAULT
  • ROVER
  • SAAB
  • SEAT
  • SKODA
  • SMART
  • SSANGYONG
  • SUBARU
  • SUZUKI
  • TOYOTA
  • VAUXHALL
  • VOLVO
  • VW
  • Show more...
Model
Type
Category:

Suspension

Sub category:

Suspension Strut

Manufacturer

Remove all filters

Suspension Strut

13 344 products
Protective Cap/Bellow, shock absorber FEBI BILSTEIN 02557FEBI BILSTEINProtective Cap/Bellow, shock absorberFEBI BILSTEINArt-Nr: 02557Inner diameter [mm]: 54,0 mmOuter diameter [mm]: 67,0 mmOuter diameter [mm]: 75,0 mmQuantity: 20Additional Info: : 1.880.115, : 7.8115, for shock absorber, intended and not modified for purpose. Please ensure the, Multifunction thermo switch MOUNTABLE in thermostat housing, Number of Wires : 4, products are installed by a competent individual. N.B., products are usually supplied without fitting instructions., Repair Circuit: VR-H2000-48S, These products are designed to be used as originallyFitting Position: Front Axle left and rightWeight [kg]: 0.032 kgMaterial: PlasticColour: BlackLength [mm]: 84 mm
$0.61
no VAT req.
Available: 10+Special OrderReady to ShipHandling time: About 30 working daysHT: About 30 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
Rubber Buffer, suspension FEBI BILSTEIN 08017FEBI BILSTEINRubber Buffer, suspensionFEBI BILSTEINArt-Nr: 08017Additional Info: for shock absorber , These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.Weight [kg]: 0.08 kgFitting Position: Front Axle left and rightThickness [mm]: 90 mm
$3.79
no VAT req.
Available: 10+Special OrderReady to ShipHandling time: About 30 working daysHT: About 30 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
Rubber Buffer, suspension FEBI BILSTEIN 03663FEBI BILSTEINRubber Buffer, suspensionFEBI BILSTEINArt-Nr: 03663Quantity: 10Additional Info: : 1.880.115, : 7.8115, for shock absorber, intended and not modified for purpose. Please ensure the, Multifunction thermo switch MOUNTABLE in thermostat housing, Number of Wires : 4, products are installed by a competent individual. N.B., products are usually supplied without fitting instructions., Repair Circuit: VR-H2000-48S, These products are designed to be used as originallyWeight [kg]: 0.092 kgFitting Position: Front Axle left and rightMaterial: Elastomer
$1.36
no VAT req.
Available: 10+Special OrderReady to ShipHandling time: About 30 working daysHT: About 30 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
Rubber Buffer, suspension SWAG 10750002SWAGRubber Buffer, suspensionSWAGArt-Nr: 10750002Inner diameter [mm]: 115,0 mmInner diameter [mm]: 79,0 mmOuter diameter [mm]: 121,0 mmQuantity: 10Thickness [mm]: 23,0 mmThickness [mm]: 48,0 mmAdditional Info: 1.880.344, 7.8344, for coil spring, intended and not modified for purpose. Please ensure the, Multifunction thermo switch FITTED into thermostat housing :, Number of Wires : 4, products are installed by a competent individual. N.B., products are usually supplied without fitting instructions., See Also VR-D674H for 8Amp Field Version, These products are designed to be used as originallyWeight [kg]: 0.255 kgColour: BlackMaterial: ElastomerNumber of Knobs: 4Fitting Position: Front Axle
$3.48
no VAT req.
Available: 10+Special OrderReady to ShipHandling time: About 30 working daysHT: About 30 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
Rubber Buffer, suspension VAICO V20-7374VAICORubber Buffer, suspensionVAICOArt-Nr: V20-7374Packaging height [cm]: 6,2 cmPackaging width [cm]: 6,2 cmWeight [kg]: 0,097 kgAdditional Info: Brake components such as brake disks, brake pads, etc., checked with regard to clearance and the wheel hub with, claims for brake parts are only reviewed with an, For brake disks and brake pads, the break-in requirements, If the vehicle is no longer in its original condition due to, In the warranty, we always make a distinction between wear, installation instructions., installation invoice and a record of the wheel hub run-out, Installation may only be carried out by trained specialist, maximum of 1000 km (break-in period). Therefore, warranty, measurement, including photos., parts and vehicle parts. All wear parts are subject to a, personnel., Please note that our products are usually delivered without, produced., Products supplied by us are without exception intended for, reduced warranty period and a maximum mileage., regard to wobble, and the appropriate documentation must be, specified by the vehicle manufacturer must be observed., the designated use., the entitlement to make warranty claims is lost due to, There is no guarantee for inappropriate, improper or, third-party work. The same warranty claims are lost if the, tuning work such as wheel accessories and tracking plates,, unintended use., vehicle is used for motor sports or similar events., When replacing brakes, the chassis components must always beFitting Position: Rear AxleMaterial: PU (Polyurethane)Suspension: for vehicles with sports suspensionSuspension: for vehicles with M-technology
$10.04
no VAT req.
Available: 10+Special OrderReady to ShipHandling time: About 15 working daysHT: About 15 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
Rubber Buffer, suspension FEBI BILSTEIN 09286FEBI BILSTEINRubber Buffer, suspensionFEBI BILSTEINArt-Nr: 09286Inner diameter [mm]: 73,0 mmOuter diameter [mm]: 116,0 mmQuantity: 10Thickness [mm]: 28,0 mmAdditional Info: 1.880.344, 7.8344, for coil spring, intended and not modified for purpose. Please ensure the, Multifunction thermo switch FITTED into thermostat housing :, Number of Wires : 4, products are installed by a competent individual. N.B., products are usually supplied without fitting instructions., See Also VR-D674H for 8Amp Field Version, These products are designed to be used as originallyWeight [kg]: 0.167 kgFitting Position: Front AxleNumber of Knobs: 3Material: ElastomerColour: Black
$5.19
no VAT req.
Available: 10Special OrderReady to ShipHandling time: About 30 working daysHT: About 30 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
Rubber Buffer, suspension FEBI BILSTEIN 17090FEBI BILSTEINRubber Buffer, suspensionFEBI BILSTEINArt-Nr: 17090Inner diameter [mm]: 63,0 mmMaterial: ElastomerOuter diameter [mm]: 105,0 mmQuantity: 10Thickness [mm]: 17,0 mmAdditional Info: 1.880.344, 7.8344, for coil spring, intended and not modified for purpose. Please ensure the, Multifunction thermo switch FITTED into thermostat housing :, Number of Wires : 4, products are installed by a competent individual. N.B., products are usually supplied without fitting instructions., See Also VR-D674H for 8Amp Field Version, These products are designed to be used as originallyWeight [kg]: 0.149 kgFitting Position: Rear AxleNumber of Knobs: 4
$6.28
no VAT req.
Available: 9Special OrderReady to ShipHandling time: About 30 working daysHT: About 30 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
Rubber Buffer, suspension FEBI BILSTEIN 07671FEBI BILSTEINRubber Buffer, suspensionFEBI BILSTEINArt-Nr: 07671Material: ElastomerQuantity: 20Additional Info: Double Bowden, for leaf spring, , intended and not modified for purpose. Please ensure the, products are installed by a competent individual. N.B., products are usually supplied without fitting instructions., These products are designed to be used as originally, vehicle-dependent installation sides, with resistance 1.413.010R, with resistance 3.7610RSWeight [kg]: 0.031 kg
$2.34
no VAT req.
Available: 8Special OrderReady to ShipHandling time: About 30 working daysHT: About 30 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
Rubber Buffer, suspension FEBI BILSTEIN 08453FEBI BILSTEINRubber Buffer, suspensionFEBI BILSTEINArt-Nr: 08453Quantity: 4Thickness [mm]: 65,0 mmAdditional Info: : 1.880.115, : 7.8115, for shock absorber, intended and not modified for purpose. Please ensure the, Multifunction thermo switch MOUNTABLE in thermostat housing, Number of Wires : 4, products are installed by a competent individual. N.B., products are usually supplied without fitting instructions., Repair Circuit: VR-H2000-48S, These products are designed to be used as originallyWeight [kg]: 0.051 kgFitting Position: Front AxleMaterial: Elastomer
$1.36
no VAT req.
Available: 8Special OrderReady to ShipHandling time: About 30 working daysHT: About 30 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
Threaded Sleeve, suspension strut FEBI BILSTEIN 14099FEBI BILSTEINThreaded Sleeve, suspension strutFEBI BILSTEINArt-Nr: 14099Quantity: 10Additional Info: Double Bowden, for strut, , intended and not modified for purpose. Please ensure the, products are installed by a competent individual. N.B., products are usually supplied without fitting instructions., Resistance Rotor [Ohm] 5000, These products are designed to be used as originally, Without BracketWeight [kg]: 0.05 kgFitting Position: Front AxleInner thread [mm]: M14 x 1,5 mm
$1.77
no VAT req.
Available: 8Special OrderReady to ShipHandling time: About 30 working daysHT: About 30 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
Rubber Buffer, suspension FEBI BILSTEIN 07732FEBI BILSTEINRubber Buffer, suspensionFEBI BILSTEINArt-Nr: 07732Material: ElastomerQuantity: 10Thickness [mm]: 18,0 mmAdditional Info: 1.880.344, 7.8344, for coil spring, intended and not modified for purpose. Please ensure the, Multifunction thermo switch FITTED into thermostat housing :, Number of Wires : 4, products are installed by a competent individual. N.B., products are usually supplied without fitting instructions., See Also VR-D674H for 8Amp Field Version, These products are designed to be used as originallyWeight [kg]: 0.13 kgFitting Position: Rear AxleNumber of Knobs: 3
$3.27
no VAT req.
Available: 6Special OrderReady to ShipHandling time: About 30 working daysHT: About 30 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
Rubber Buffer, suspension FEBI BILSTEIN 23524FEBI BILSTEINRubber Buffer, suspensionFEBI BILSTEINArt-Nr: 23524Material: PU (Polyurethane)Quantity: 2Additional Info: for leaf spring, Double Bowden, , intended and not modified for purpose. Please ensure the, products are installed by a competent individual. N.B., products are usually supplied without fitting instructions., These products are designed to be used as originally, with resistance 1.413.010R, with resistance 3.7610RSWeight [kg]: 0.025 kgFitting Position: Rear Axle
$19.08
no VAT req.
Available: 6Special OrderReady to ShipHandling time: About 30 working daysHT: About 30 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
Threaded Sleeve, suspension strut FEBI BILSTEIN 02159FEBI BILSTEINThreaded Sleeve, suspension strutFEBI BILSTEINArt-Nr: 02159Quantity: 10Thickness [mm]: 13,0 mmAdditional Info: Double Bowden, for strut, , intended and not modified for purpose. Please ensure the, products are installed by a competent individual. N.B., products are usually supplied without fitting instructions., Resistance Rotor [Ohm] 5000, These products are designed to be used as originally, Without BracketWeight [kg]: 0.016 kgFitting Position: Front AxleInner thread [mm]: M14 x 1,5 mmOuter diameter [mm]: 19.5 mm
$0.87
no VAT req.
Available: 2Special OrderReady to ShipHandling time: About 30 working daysHT: About 30 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
Screw Kit, suspension strut/wheel bearing housing FEBI BILSTEIN 27876FEBI BILSTEINScrew Kit, suspension strut/wheel bearing housingFEBI BILSTEINArt-Nr: 27876Quantity: 10Additional Info: : 1.880.115, : 7.8115, for shock absorber, intended and not modified for purpose. Please ensure the, Multifunction thermo switch MOUNTABLE in thermostat housing, Number of Wires : 4, products are installed by a competent individual. N.B., products are usually supplied without fitting instructions., Repair Circuit: VR-H2000-48S, These products are designed to be used as originallyWeight [kg]: 0.11 kgFitting Position: Front Axle left and right
$2.10
no VAT req.
Available: 5Special OrderReady to ShipHandling time: About 30 working daysHT: About 30 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
Rubber Buffer, suspension FEBI BILSTEIN 08066FEBI BILSTEINRubber Buffer, suspensionFEBI BILSTEINArt-Nr: 08066Quantity: 2Thickness [mm]: 155,0 mmAdditional Info: : 7.8115, : 1.880.115, for shock absorber, intended and not modified for purpose. Please ensure the, Multifunction thermo switch MOUNTABLE in thermostat housing, Number of Wires : 4, products are installed by a competent individual. N.B., products are usually supplied without fitting instructions., Repair Circuit: VR-H2000-48S, These products are designed to be used as originallyMaterial: PU (Polyurethane)Weight [kg]: 0.091 kgFitting Position: Left and rightFitting Position: Rear Axle
$3.52
no VAT req.
Available: 4Special OrderReady to ShipHandling time: About 30 working daysHT: About 30 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
Showing 1-15 of 13344 Products