Select vehicle

Make
  • ALFA ROMEO
  • AUDI
  • BMW
  • CADILLAC
  • CHEVROLET
  • CHRYSLER
  • CITROËN
  • DACIA
  • DAEWOO
  • DAIHATSU
  • DODGE
  • FIAT
  • FORD
  • HONDA
  • HUMMER
  • HYUNDAI
  • INFINITI
  • ISUZU
  • JAGUAR
  • JEEP
  • KIA
  • LADA
  • LANCIA
  • LAND ROVER
  • LEXUS
  • MASERATI
  • MAZDA
  • MERCEDES-BENZ
  • MG
  • MINI
  • MITSUBISHI
  • NISSAN
  • OPEL
  • PEUGEOT
  • PORSCHE
  • RENAULT
  • ROVER
  • SAAB
  • SEAT
  • SKODA
  • SMART
  • SSANGYONG
  • SUBARU
  • SUZUKI
  • TOYOTA
  • VAUXHALL
  • VOLVO
  • VW
  • Show more...
Model
Type
Category:

Exhaust System

Sub category:

Urea Injection

Sub category:

Sensor

Manufacturer

Remove all filters

Sensor17 products

no imageMETZGERNOx Sensor, urea injectionMETZGERArt-Nr: 0899199Quality: AMExhaust System: for vehicles with factory fitted soot -/particulate filterExhaust System: before soot particulate filter
$243.81
no VAT req.
Available: 10+Special OrderHandling time: About 10 working daysHT: About 10 working daysHandling time: About 30 working daysHT: About 30 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
no imageMETZGERNOx Sensor, urea injectionMETZGERArt-Nr: 0899198Quality: AMExhaust System: for vehicles with factory fitted soot -/particulate filterExhaust System: after soot particulate filter
$243.81
no VAT req.
Available: 10Special OrderHandling time: About 10 working daysHT: About 10 working daysHandling time: About 30 working daysHT: About 30 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
no imageVEMONOx Sensor, urea injectionVEMOArt-Nr: V20-72-0130Weight [kg]: 0.236 kgPackaging width [cm]: 5.7 cmPackaging width [cm]: 13.7 cmPackaging height [cm]: 12.85 cmPackaging height [cm]: 3.7 cmPackaging Depth [cm]: 12.85 cmPackaging Depth [cm]: 14.7 cmAdditional Info: Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use., In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. For the following wear parts, the warranty periods are limited as follows: EGR valve 15,000 km Throttle bodies 15,000 km Air flow meter 15,000 km Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
$295.26
no VAT req.
Available: 10+Special OrderHandling time: About 15 working daysHT: About 15 working daysHandling time: About 30 working daysHT: About 30 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
no imageVEMONOx Sensor, urea injectionVEMOArt-Nr: V30-72-0845Fitting Position: Front Axle LeftCable Length [mm]: 615 mmAdditional Info: Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use., In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. For the following wear parts, the warranty periods are limited as follows: EGR valve 15,000 km Throttle bodies 15,000 km Air flow meter 15,000 km Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
$304.77
no VAT req.
Available: 10+Special OrderHandling time: About 15 working daysHT: About 15 working daysHandling time: About 30 working daysHT: About 30 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
no imageVEMONOx Sensor, urea injectionVEMOArt-Nr: V30-72-0847Fitting Position: Front Axle LeftCable Length [mm]: 815 mmAdditional Info: Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use., In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. For the following wear parts, the warranty periods are limited as follows: EGR valve 15,000 km Throttle bodies 15,000 km Air flow meter 15,000 km Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
$304.77
no VAT req.
Available: 10+Special OrderHandling time: About 15 working daysHT: About 15 working daysHandling time: About 30 working daysHT: About 30 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
no imageVEMONOx Sensor, urea injectionVEMOArt-Nr: V30-72-0913Number of Poles: 5 terminalConnector Shape: OvalNumber of mounting bores: 2Additional Info: Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use., In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. For the following wear parts, the warranty periods are limited as follows: EGR valve 15,000 km Throttle bodies 15,000 km Air flow meter 15,000 km Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
$304.77
no VAT req.
Available: 10+Special OrderHandling time: About 15 working daysHT: About 15 working daysHandling time: About 30 working daysHT: About 30 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
no imageVEMONOx Sensor, urea injectionVEMOArt-Nr: V20-72-0900Cable Length [mm]: 590 mmConnector Shape: OvalNumber of mounting bores: 2Additional Info: Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use., In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. For the following wear parts, the warranty periods are limited as follows: EGR valve 15,000 km Throttle bodies 15,000 km Air flow meter 15,000 km Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
$295.26
no VAT req.
Available: 10+Special OrderHandling time: About 15 working daysHT: About 15 working daysHandling time: About 30 working daysHT: About 30 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
no imageVEMONOx Sensor, urea injectionVEMOArt-Nr: V30-72-0914Number of Poles: 5 terminalConnector Shape: OvalNumber of mounting bores: 2Additional Info: Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use., In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. For the following wear parts, the warranty periods are limited as follows: EGR valve 15,000 km Throttle bodies 15,000 km Air flow meter 15,000 km Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
$317.31
no VAT req.
Available: 5Special OrderHandling time: About 15 working daysHT: About 15 working daysHandling time: About 30 working daysHT: About 30 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
no imageVEMONOx Sensor, urea injectionVEMOArt-Nr: V30-72-0909Cable Length [mm]: 390 mmNumber of Poles: 5 terminalConnector Shape: OvalNumber of mounting bores: 2Additional Info: Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use., In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. For the following wear parts, the warranty periods are limited as follows: EGR valve 15,000 km Throttle bodies 15,000 km Air flow meter 15,000 km Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
$304.77
no VAT req.
Available: 3Special OrderHandling time: About 15 working daysHT: About 15 working daysHandling time: About 30 working daysHT: About 30 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
no imageBOSCHNOx Sensor, urea injectionBOSCHArt-Nr: 0281006537
$239.85
no VAT req.
Special OrderHandling time: About 10 working daysHT: About 10 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
no imageBOSCHNOx Sensor, urea injectionBOSCHArt-Nr: 0281006644
$275.93
no VAT req.
Special OrderHandling time: About 10 working daysHT: About 10 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
no imageBOSCHNOx Sensor, urea injectionBOSCHArt-Nr: 0281007902
$146.34
no VAT req.
Special OrderHandling time: About 10 working daysHT: About 10 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
no imageVEMONOx Sensor, urea injectionVEMOArt-Nr: V30-72-0911Number of Poles: 5 terminalConnector Shape: OvalNumber of mounting bores: 2Exhaust System: Post-catalystAdditional Info: Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use., In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. For the following wear parts, the warranty periods are limited as follows: EGR valve 15,000 km Throttle bodies 15,000 km Air flow meter 15,000 km Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
$304.77
no VAT req.
Special OrderHandling time: About 30 working daysHT: About 30 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
no imageVEMONOx Sensor, urea injectionVEMOArt-Nr: V30-72-0846Cable Length [mm]: 415 mmAdditional Info: Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use., In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. For the following wear parts, the warranty periods are limited as follows: EGR valve 15,000 km Throttle bodies 15,000 km Air flow meter 15,000 km Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
$304.77
no VAT req.
Special OrderHandling time: About 30 working daysHT: About 30 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
NOx Sensor, urea injection METZGER 0899174METZGERNOx Sensor, urea injectionMETZGERArt-Nr: 0899174Quality: AM
$265.97
no VAT req.
Special OrderHandling time: About 30 working daysHT: About 30 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
Showing 1-15 of 17 Products