Select vehicle

Make
  • ALFA ROMEO
  • AUDI
  • BMW
  • CADILLAC
  • CHEVROLET
  • CHRYSLER
  • CITROËN
  • DACIA
  • DAEWOO
  • DAIHATSU
  • DODGE
  • FIAT
  • FORD
  • HONDA
  • HUMMER
  • HYUNDAI
  • INFINITI
  • ISUZU
  • JAGUAR
  • JEEP
  • KIA
  • LADA
  • LANCIA
  • LAND ROVER
  • LEXUS
  • MASERATI
  • MAZDA
  • MERCEDES-BENZ
  • MG
  • MINI
  • MITSUBISHI
  • NISSAN
  • OPEL
  • PEUGEOT
  • PORSCHE
  • RENAULT
  • ROVER
  • SAAB
  • SEAT
  • SKODA
  • SMART
  • SSANGYONG
  • SUBARU
  • SUZUKI
  • TOYOTA
  • VAUXHALL
  • VOLVO
  • VW
  • Show more...
Model
Type
Category:

Engine

Sub category:

Lubrication

Sub category:

Oil

Manufacturer

Remove all filters

Oli

527 products
Engine Oil VAICO V60-0109VAICOEngine OilVAICOArt-Nr: V60-0109Content [litre]: 1 lPackaging Depth [cm]: 41 cmPackaging height [cm]: 24 cmPackaging width [cm]: 23,5 cmWeight [kg]: 0,94 kgAdditional Info: Brake components such as brake disks, brake pads, etc., checked with regard to clearance and the wheel hub with, claims for brake parts are only reviewed with an, For brake disks and brake pads, the break-in requirements, If the vehicle is no longer in its original condition due to, In the warranty, we always make a distinction between wear, installation instructions., installation invoice and a record of the wheel hub run-out, Installation may only be carried out by trained specialist, maximum of 1000 km (break-in period). Therefore, warranty, measurement, including photos., parts and vehicle parts. All wear parts are subject to a, personnel., Please note that our products are usually delivered without, produced., Products supplied by us are without exception intended for, reduced warranty period and a maximum mileage., regard to wobble, and the appropriate documentation must be, specified by the vehicle manufacturer must be observed., the designated use., the entitlement to make warranty claims is lost due to, There is no guarantee for inappropriate, improper or, third-party work. The same warranty claims are lost if the, tuning work such as wheel accessories and tracking plates,, unintended use., vehicle is used for motor sports or similar events., When replacing brakes, the chassis components must always beHeight [mm]: 225 mmAPI specification: CFAPI specification: SNACEA specification: A5/B5Width [mm]: 115 mmLength [mm]: 60 mmRecommended replace interval [years]: 1 YearsPacking Type: BottleAdditional Info: Specifications: ACEA A1, B1; API SM/ CF ILSAC GF-2 FORD: WSS-M2C913-A FORD: WSS-M2C913-B FORD: WSS-M2C913-CChemical Properties: SyntheticOil Viscosity Classification SAE: 5W-30
$9.78
no VAT req.
Available: 10+Available: 10+Special OrderReady to ShipHandling time: About 15 working daysHT: About 15 working daysHandling time: About 15 working daysHT: About 15 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
Engine Oil VAICO V60-0012VAICOEngine OilVAICOArt-Nr: V60-0012Content [litre]: 1 lPackaging Depth [cm]: 41 cmPackaging height [cm]: 24 cmPackaging width [cm]: 23,5 cmWeight [kg]: 1,21 kgAdditional Info: Benz 229.1 VW 500.00 VW 505.00, Performance Levels: API SL/CF ACEA A 3-98, B 3-98 MercedesAdditional Info: Brake components such as brake disks, brake pads, etc., checked with regard to clearance and the wheel hub with, claims for brake parts are only reviewed with an, For brake disks and brake pads, the break-in requirements, If the vehicle is no longer in its original condition due to, In the warranty, we always make a distinction between wear, installation instructions., installation invoice and a record of the wheel hub run-out, Installation may only be carried out by trained specialist, maximum of 1000 km (break-in period). Therefore, warranty, measurement, including photos., parts and vehicle parts. All wear parts are subject to a, personnel., Please note that our products are usually delivered without, produced., Products supplied by us are without exception intended for, reduced warranty period and a maximum mileage., regard to wobble, and the appropriate documentation must be, specified by the vehicle manufacturer must be observed., the designated use., the entitlement to make warranty claims is lost due to, There is no guarantee for inappropriate, improper or, third-party work. The same warranty claims are lost if the, tuning work such as wheel accessories and tracking plates,, unintended use., vehicle is used for motor sports or similar events., When replacing brakes, the chassis components must always beAPI specification: SLACEA specification: A3/B4Recommended replace interval [years]: 1 YearsLength [mm]: 60 mmAPI specification: CFChemical Properties: Part Synthetic OilHeight [mm]: 225 mmWidth [mm]: 115 mmPacking Type: BottleOil Viscosity Classification SAE: 10W-40
$8.25
no VAT req.
Available: 10+Available: 10+Special OrderReady to ShipHandling time: About 15 working daysHT: About 15 working daysHandling time: About 15 working daysHT: About 15 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
Engine Oil VAICO V60-0053VAICOEngine OilVAICOArt-Nr: V60-0053Content [litre]: 1 lOil Viscosity Classification SAE: 5W-30Packaging Depth [cm]: 41 cmPackaging height [cm]: 24 cmPackaging width [cm]: 23,5 cmAdditional Info: Brake components such as brake disks, brake pads, etc., checked with regard to clearance and the wheel hub with, claims for brake parts are only reviewed with an, For brake disks and brake pads, the break-in requirements, If the vehicle is no longer in its original condition due to, In the warranty, we always make a distinction between wear, installation instructions., installation invoice and a record of the wheel hub run-out, Installation may only be carried out by trained specialist, maximum of 1000 km (break-in period). Therefore, warranty, measurement, including photos., parts and vehicle parts. All wear parts are subject to a, personnel., Please note that our products are usually delivered without, produced., Products supplied by us are without exception intended for, reduced warranty period and a maximum mileage., regard to wobble, and the appropriate documentation must be, specified by the vehicle manufacturer must be observed., the designated use., the entitlement to make warranty claims is lost due to, There is no guarantee for inappropriate, improper or, third-party work. The same warranty claims are lost if the, tuning work such as wheel accessories and tracking plates,, unintended use., vehicle is used for motor sports or similar events., When replacing brakes, the chassis components must always beACEA specification: C3Length [mm]: 60 mmHeight [mm]: 225 mmWidth [mm]: 115 mmWeight [kg]: 0.93 kgRecommended replace interval [years]: 1 YearsRecommended replace interval [km]: 30000 kmChemical Properties: SyntheticPacking Type: Bottle
$15.39
no VAT req.
Available: 10+Available: 10+Special OrderReady to ShipHandling time: About 15 working daysHT: About 15 working daysHandling time: About 15 working daysHT: About 15 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
Engine Oil VAICO V60-0025VAICOEngine OilVAICOArt-Nr: V60-0025Content [litre]: 1 lPackaging Depth [cm]: 41 cmPackaging height [cm]: 24 cmPackaging width [cm]: 23,5 cmWeight [kg]: 1,19 kgAdditional Info: Brake components such as brake disks, brake pads, etc., checked with regard to clearance and the wheel hub with, claims for brake parts are only reviewed with an, For brake disks and brake pads, the break-in requirements, If the vehicle is no longer in its original condition due to, In the warranty, we always make a distinction between wear, installation instructions., installation invoice and a record of the wheel hub run-out, Installation may only be carried out by trained specialist, maximum of 1000 km (break-in period). Therefore, warranty, measurement, including photos., parts and vehicle parts. All wear parts are subject to a, personnel., Please note that our products are usually delivered without, produced., Products supplied by us are without exception intended for, reduced warranty period and a maximum mileage., regard to wobble, and the appropriate documentation must be, specified by the vehicle manufacturer must be observed., the designated use., the entitlement to make warranty claims is lost due to, There is no guarantee for inappropriate, improper or, third-party work. The same warranty claims are lost if the, tuning work such as wheel accessories and tracking plates,, unintended use., vehicle is used for motor sports or similar events., When replacing brakes, the chassis components must always bePacking Type: BottleWidth [mm]: 115 mmACEA specification: A3/B4Height [mm]: 225 mmLength [mm]: 60 mmAPI specification: SNAPI specification: CFChemical Properties: SyntheticRecommended replace interval [years]: 1 YearsAdditional Info: Performance Levels: API SJ/CF BMW Longlife MB 229.3 Porsche VW 502.00/505.00 ACEA A3-98, B3-98, B4-98Oil Viscosity Classification SAE: 5W-40
$8.91
no VAT req.
Available: 10+Available: 10+Special OrderReady to ShipHandling time: About 15 working daysHT: About 15 working daysHandling time: About 15 working daysHT: About 15 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
Engine Oil VAICO V60-0014VAICOEngine OilVAICOArt-Nr: V60-0014API specification: CFAPI specification: SLContent [litre]: 1 lPackaging Depth [cm]: 41 cmPackaging height [cm]: 24 cmPackaging width [cm]: 23,5 cmWeight [kg]: 1,19 kgAdditional Info: Brake components such as brake disks, brake pads, etc., checked with regard to clearance and the wheel hub with, claims for brake parts are only reviewed with an, For brake disks and brake pads, the break-in requirements, If the vehicle is no longer in its original condition due to, In the warranty, we always make a distinction between wear, installation instructions., installation invoice and a record of the wheel hub run-out, Installation may only be carried out by trained specialist, maximum of 1000 km (break-in period). Therefore, warranty, measurement, including photos., parts and vehicle parts. All wear parts are subject to a, personnel., Please note that our products are usually delivered without, produced., Products supplied by us are without exception intended for, reduced warranty period and a maximum mileage., regard to wobble, and the appropriate documentation must be, specified by the vehicle manufacturer must be observed., the designated use., the entitlement to make warranty claims is lost due to, There is no guarantee for inappropriate, improper or, third-party work. The same warranty claims are lost if the, tuning work such as wheel accessories and tracking plates,, unintended use., vehicle is used for motor sports or similar events., When replacing brakes, the chassis components must always beAdditional Info: 271 MIL-L-2104E VW 501 01/ VW 505 00 ACEA A2, B2 E2, Caterpillar TO-2, TO-3 Mercedes Benz Blatt 228.1, Performance Levels: MIL-L-46152D API SG/CE Allison C-4 MANChemical Properties: Contains mineral oilACEA specification: A3/B4Height [mm]: 225 mmWidth [mm]: 115 mmOil Viscosity Classification SAE: SAE 15W-40Packing Type: BottleLength [mm]: 60 mmRecommended replace interval [years]: 1 YearsOil Viscosity Classification SAE: 15W-40
$8.20
no VAT req.
Available: 10+Available: 10+Special OrderReady to ShipHandling time: About 15 working daysHT: About 15 working daysHandling time: About 15 working daysHT: About 15 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
Engine Oil VAICO V60-0054VAICOEngine OilVAICOArt-Nr: V60-0054Content [litre]: 5 lOil Viscosity Classification SAE: 5W-30Packaging height [cm]: 30,5 cmPackaging width [cm]: 23,5 cmAdditional Info: Brake components such as brake disks, brake pads, etc., checked with regard to clearance and the wheel hub with, claims for brake parts are only reviewed with an, For brake disks and brake pads, the break-in requirements, If the vehicle is no longer in its original condition due to, In the warranty, we always make a distinction between wear, installation instructions., installation invoice and a record of the wheel hub run-out, Installation may only be carried out by trained specialist, maximum of 1000 km (break-in period). Therefore, warranty, measurement, including photos., parts and vehicle parts. All wear parts are subject to a, personnel., Please note that our products are usually delivered without, produced., Products supplied by us are without exception intended for, reduced warranty period and a maximum mileage., regard to wobble, and the appropriate documentation must be, specified by the vehicle manufacturer must be observed., the designated use., the entitlement to make warranty claims is lost due to, There is no guarantee for inappropriate, improper or, third-party work. The same warranty claims are lost if the, tuning work such as wheel accessories and tracking plates,, unintended use., vehicle is used for motor sports or similar events., When replacing brakes, the chassis components must always beWeight [kg]: 4.492 kgACEA specification: C3Width [mm]: 115 mmHeight [mm]: 230 mmLength [mm]: 300 mmRecommended replace interval [years]: 1 YearsChemical Properties: SyntheticPacking Type: CanisterOil Viscosity Classification SAE: 5W-30/5
$47.27
no VAT req.
Available: 10+Available: 10+Special OrderReady to ShipHandling time: About 15 working daysHT: About 15 working daysHandling time: About 15 working daysHT: About 15 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
Engine Oil FEBI BILSTEIN 32936FEBI BILSTEINEngine OilFEBI BILSTEINArt-Nr: 32936Content [litre]: 1 lQuantity: 20SAE viscosity class: 5W-40Specification: ACEA A3/B4Additional Info: intended and not modified for purpose. Please ensure the, products are installed by a competent individual. N.B., products are usually supplied without fitting instructions., SAE 5W-40, These products are designed to be used as originallyAdditional Info: application., available. We recommend refilling in line with the, confirmed, then please consult the service history as the, found in the owner's handbook, engine compartment, or on, manufacturer's specifications. This information can be, oil specification may have been changed for a specific, Please be aware there are different specifications, the service schedule. If the specification can not beSpecification: VW 502 00Specification: VW 505 00Weight [kg]: 0.952 kgSpecification: PSA B 712296Specification: BMW Longlife-01Specification: Renault RN 0700Specification: API - SN/CFSpecification: MB 229.3Specification: VW 502 00/505 00Specification: GM LL-B 025Specification: Porsche A40Specification: Renault RN 0710
$6.61
no VAT req.
Available: 10+Available: 10+Special OrderReady to ShipHandling time: About 10 working daysHT: About 10 working daysHandling time: About 30 working daysHT: About 30 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
Engine Oil VAICO V60-0026VAICOEngine OilVAICOArt-Nr: V60-0026Content [litre]: 5 lPackaging height [cm]: 30,5 cmPackaging width [cm]: 23,5 cmWeight [kg]: 4,64 kgAdditional Info: Brake components such as brake disks, brake pads, etc., checked with regard to clearance and the wheel hub with, claims for brake parts are only reviewed with an, For brake disks and brake pads, the break-in requirements, If the vehicle is no longer in its original condition due to, In the warranty, we always make a distinction between wear, installation instructions., installation invoice and a record of the wheel hub run-out, Installation may only be carried out by trained specialist, maximum of 1000 km (break-in period). Therefore, warranty, measurement, including photos., parts and vehicle parts. All wear parts are subject to a, personnel., Please note that our products are usually delivered without, produced., Products supplied by us are without exception intended for, reduced warranty period and a maximum mileage., regard to wobble, and the appropriate documentation must be, specified by the vehicle manufacturer must be observed., the designated use., the entitlement to make warranty claims is lost due to, There is no guarantee for inappropriate, improper or, third-party work. The same warranty claims are lost if the, tuning work such as wheel accessories and tracking plates,, unintended use., vehicle is used for motor sports or similar events., When replacing brakes, the chassis components must always beChemical Properties: SyntheticWidth [mm]: 115 mmAPI specification: SNACEA specification: A3/B4API specification: CFRecommended replace interval [years]: 1 YearsHeight [mm]: 230 mmLength [mm]: 300 mmAdditional Info: Performance Levels: API SJ/CF BMW Longlife MB 229.3 Porsche VW 502.00/505.00 ACEA A3-98, B3-98, B4-98Packing Type: CanisterOil Viscosity Classification SAE: 5W-40
$34.73
no VAT req.
Available: 10+Available: 10+Special OrderReady to ShipHandling time: About 15 working daysHT: About 15 working daysHandling time: About 15 working daysHT: About 15 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
Engine Oil FEBI BILSTEIN 101140FEBI BILSTEINEngine OilFEBI BILSTEINArt-Nr: 101140Content [litre]: 1 lQuantity: 20SAE viscosity class: 0W-40Additional Info: intended and not modified for purpose. Please ensure the, products are installed by a competent individual. N.B., products are usually supplied without fitting instructions., SAE 0W-40, These products are designed to be used as originallyAdditional Info: application., available. We recommend refilling in line with the, confirmed, then please consult the service history as the, found in the owner's handbook, engine compartment, or on, manufacturer's specifications. This information can be, oil specification may have been changed for a specific, Please be aware there are different specifications, the service schedule. If the specification can not beSpecification: VW 502 00/505 00Specification: VW 502 00Specification: VW 505 00Specification: Ford WSS-M2C937-ASpecification: Porsche A40Weight [kg]: 0.979 kgSpecification: API SN/CFSpecification: ACEA A3/B4Specification: BMW Longlife-01Specification: MB 229.3Specification: MB 229.5
$10.45
no VAT req.
Available: 10+Available: 10+Special OrderReady to ShipHandling time: About 10 working daysHT: About 10 working daysHandling time: About 30 working daysHT: About 30 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
Engine Oil FEBI BILSTEIN 32931FEBI BILSTEINEngine OilFEBI BILSTEINArt-Nr: 32931Content [litre]: 1 lQuantity: 20SAE viscosity class: 10W-40Specification: ACEA A3/B4Specification: Fiat 8.55535-G2/D2Additional Info: application., available. We recommend refilling in line with the, confirmed, then please consult the service history as the, found in the owner's handbook, engine compartment, or on, manufacturer's specifications. This information can be, oil specification may have been changed for a specific, Please be aware there are different specifications, the service schedule. If the specification can not beAdditional Info: intended and not modified for purpose. Please ensure the, products are installed by a competent individual. N.B., products are usually supplied without fitting instructions., SAE 10W-40, These products are designed to be used as originallySpecification: VW 501 01Specification: VW 505 00Weight [kg]: 0.95 kgSpecification: VW 501 01/505 00Specification: API - SL/CFSpecification: MB 229.1
$5.65
no VAT req.
Available: 10+Available: 10+Special OrderReady to ShipHandling time: About 10 working daysHT: About 10 working daysHandling time: About 30 working daysHT: About 30 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
Engine Oil FEBI BILSTEIN 101150FEBI BILSTEINEngine OilFEBI BILSTEINArt-Nr: 101150Content [litre]: 1 lQuantity: 20SAE viscosity class: 5W-30Additional Info: intended and not modified for purpose. Please ensure the, products are installed by a competent individual. N.B., products are usually supplied without fitting instructions., SAE 5W-30 HC-FO, These products are designed to be used as originallySpecification: Ford WSS-M2C913-DSpecification: Ford WSS-M2C913-CWeight [kg]: 0.992 kgSpecification: ILSAC GF-4Specification: ILSAC GF-3Specification: API SN/CFSpecification: ACEA A5/B5Specification: ACEA A1/B1
$8.00
no VAT req.
Available: 10+Available: 10+Special OrderReady to ShipHandling time: About 10 working daysHT: About 10 working daysHandling time: About 30 working daysHT: About 30 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
Engine Oil FEBI BILSTEIN 32945FEBI BILSTEINEngine OilFEBI BILSTEINArt-Nr: 32945Content [litre]: 1 lQuantity: 20SAE viscosity class: 5W-30Additional Info: intended and not modified for purpose. Please ensure the, products are installed by a competent individual. N.B., products are usually supplied without fitting instructions., SAE 5W-30 Longlife Plus, These products are designed to be used as originallyAdditional Info: application., available. We recommend refilling in line with the, confirmed, then please consult the service history as the, found in the owner's handbook, engine compartment, or on, manufacturer's specifications. This information can be, oil specification may have been changed for a specific, Please be aware there are different specifications, the service schedule. If the specification can not beSpecification: ACEA C3Specification: VW 504 00Specification: VW 507 00Weight [kg]: 0.961 kgSpecification: BMW Longlife-04Specification: MB 229.51Specification: VW 504 00/507 00Specification: API SN/CF
$10.24
no VAT req.
Available: 10+Available: 10+Special OrderReady to ShipHandling time: About 10 working daysHT: About 10 working daysHandling time: About 30 working daysHT: About 30 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
Engine Oil VAICO V60-0248VAICOEngine OilVAICOArt-Nr: V60-0248Content [litre]: 5 lPackaging height [cm]: 30,5 cmPackaging width [cm]: 23,5 cmAdditional Info: the designated use., Brake components such as brake disks, brake pads, etc., checked with regard to clearance and the wheel hub with, claims for brake parts are only reviewed with an, For brake disks and brake pads, the break-in requirements, If the vehicle is no longer in its original condition due to, In the warranty, we always make a distinction between wear, installation instructions., installation invoice and a record of the wheel hub run-out, Installation may only be carried out by trained specialist, maximum of 1000 km (break-in period). Therefore, warranty, measurement, including photos., parts and vehicle parts. All wear parts are subject to a, personnel., Please note that our products are usually delivered without, produced., Products supplied by us are without exception intended for, reduced warranty period and a maximum mileage., regard to wobble, and the appropriate documentation must be, specified by the vehicle manufacturer must be observed., the entitlement to make warranty claims is lost due to, There is no guarantee for inappropriate, improper or, third-party work. The same warranty claims are lost if the, tuning work such as wheel accessories and tracking plates,, unintended use., vehicle is used for motor sports or similar events., When replacing brakes, the chassis components must always beAPI specification: SFWidth [mm]: 115 mmAPI specification: CDHeight [mm]: 230 mmLength [mm]: 300 mmWeight [kg]: 4.72 kgRecommended replace interval [years]: 1 YearsPacking Type: CanisterOil Viscosity Classification SAE: 15W-40 RST
$22.62
no VAT req.
Available: 10+Available: 10+Special OrderReady to ShipHandling time: About 15 working daysHT: About 15 working daysHandling time: About 15 working daysHT: About 15 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
Engine Oil FEBI BILSTEIN 108350FEBI BILSTEINEngine OilFEBI BILSTEINArt-Nr: 108350Content [litre]: 1 lQuantity: 12SAE viscosity class: 5W-20Specification: ACEA A1/B1(obsolete)Specification: FIAT 9.55535-CR1Additional Info: intended and not modified for purpose. Please ensure the, products are installed by a competent individual. N.B., products are usually supplied without fitting instructions., SAE 5W-20 HC E-FO, These products are designed to be used as originallySpecification: ACEA C5Specification: API SNSpecification: Ford WSS-M2C948-BSpecification: Chrysler MS 6395Specification: Jaguar STJLR.03.5004Weight [kg]: 0.916 kg
$10.27
no VAT req.
Available: 10+Available: 10+Special OrderReady to ShipHandling time: About 10 working daysHT: About 10 working daysHandling time: About 30 working daysHT: About 30 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
Engine Oil FEBI BILSTEIN 108360FEBI BILSTEINEngine OilFEBI BILSTEINArt-Nr: 108360Content [litre]: 1 lQuantity: 12SAE viscosity class: 5W-30Specification: MB 229.51Additional Info: intended and not modified for purpose. Please ensure the, products are installed by a competent individual. N.B., products are usually supplied without fitting instructions., SAE 5W-30 HC C4, These products are designed to be used as originallySpecification: ACEA C3/C4Specification: MB 226.51Specification: MB 229.31Specification: Renault RN 0720Weight [kg]: 0.85 kg
$10.27
no VAT req.
Available: 10+Available: 10+Special OrderReady to ShipHandling time: About 10 working daysHT: About 10 working daysHandling time: About 30 working daysHT: About 30 working days
Add to wishlistpaypalVisaVisa ElectronMasterCardMaestro
Showing 1-15 of 527 Products