Brake Fluid
112 products
Brake Fluid
Art-Nr: V60-0317
DOT specification: DOT 4
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
Content [litre]: 0,25 l
$5.18
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Brake Fluid
Art-Nr: V60-0242
Specification: SAE J 1703 F
Specification: ISO 4925
Specification: FMVSS 116 DOT 4
Packing Type: Bottle
Chemical Properties: Synthetic
Length [mm]: 96 mm
Height [mm]: 172 mm
Oil Viscosity Classification SAE: VA-DOT 4
Dry Boiling Point [°C]: 260 °C
Wet Boiling Point [°C]: 155 °C
Recommended replace interval [km]: 40000 km
Weight [kg]: 0.31 kg
DOT specification: DOT 4
Recommended replace interval [years]: 2 Years
Content [litre]: 0,25 l
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
Width [mm]: 58,0 mm
$4.70
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Brake Fluid
Art-Nr: V60-0318
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
Recommended replace interval [km]: 40000 km
Recommended replace interval [years]: 2 Years
Dry Boiling Point [°C]: 265 °C
Wet Boiling Point [°C]: 170 °C
Packing Type: Bottle
Content [litre]: 0,5 l
DOT specification: DOT 4
$7.69
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Brake Fluid
Art-Nr: V60-0074
Specification: SAE J 1703 F
Specification: ISO 4925
Specification: FMVSS 116 DOT 4
Packing Type: Bottle
Chemical Properties: Synthetic
Recommended replace interval [years]: 2 Years
DOT specification: DOT 4
Length [mm]: 95 mm
Weight [kg]: 0.6 kg
Specification: ISO 4925 Class 4
Wet Boiling Point [°C]: 155 °C
Recommended replace interval [km]: 40000 km
Height [mm]: 174 mm
Dry Boiling Point [°C]: 260 °C
Weight [kg]: 0,858 kg
Content [litre]: 0,5 l
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
Width [mm]: 58,0 mm
$7.64
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Brake Fluid
Art-Nr: V60-0319
Recommended replace interval [km]: 40000 km
Recommended replace interval [years]: 2 Years
Dry Boiling Point [°C]: 265 °C
Wet Boiling Point [°C]: 170 °C
Packing Type: Bottle
Content [litre]: 1 l
DOT specification: DOT 4
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
$14.08
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 15 business day(s)
Handling Time: About 15 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 15 business day(s) of receiving cleared payment.
Add to wishlist
Brake Fluid
Art-Nr: 26746
Weight [kg]: 0.301 kg
DOT specification: DOT 4
Content [litre]: 0,25 l
Specification: DOT 4
Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
$2.68
no VAT req.
Available: 10+
Handling time: About 10 business day(s)
Handling Time: About 10 business day(s)
?
The item should be shipped within 10 business day(s) of receiving cleared payment.
Add to wishlist
Brake Fluid
Art-Nr: 23930
Specification: ISO 4925
Specification: MB 331.0
Weight [kg]: 1.139 kg
DOT specification: DOT 4
Content [litre]: 1 l
Additional Info: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
for OE number: DOT 4 Plus
$9.20
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 10 business day(s)
Handling Time: About 10 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 10 business day(s) of receiving cleared payment.
Add to wishlist
Brake Fluid
Art-Nr: 402407
Chemical Properties: Synthetic
Packing Type: Bottle
Weight [kg]: 0.6 kg
Dry Boiling Point [°C]: 265 °C
Content [litre]: 0,5 l
DOT specification: DOT 5.1
$5.47
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 10 business day(s)
Handling Time: About 10 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 10 business day(s) of receiving cleared payment.
Add to wishlist
Brake Fluid
Art-Nr: 402402
Chemical Properties: Synthetic
Packing Type: Bottle
Weight [kg]: 0.59 kg
Dry Boiling Point [°C]: 245 °C
Content [litre]: 0,5 l
DOT specification: DOT 4
$4.19
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 10 business day(s)
Handling Time: About 10 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 10 business day(s) of receiving cleared payment.
Add to wishlist
Brake Fluid
Art-Nr: 402403
Chemical Properties: Synthetic
Packing Type: Bottle
Weight [kg]: 1.15 kg
Dry Boiling Point [°C]: 245 °C
Content [litre]: 1 l
DOT specification: DOT 4
$7.54
no VAT req.
Available: 10+
Available: 10+
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
Handling time: About 10 business day(s)
Handling Time: About 10 business day(s)
The item should be shipped within 1 business day(s) of receiving cleared payment.
?
The item should be shipped within 10 business day(s) of receiving cleared payment.
Add to wishlist
Brake Fluid
Art-Nr: V60-0236
Packing Type: Bottle
Chemical Properties: Synthetic
Weight [kg]: 1.15 kg
Quality: DOT 4+
Length [mm]: 60 mm
Height [mm]: 225 mm
Specification: FMVSS 116 DOT 4
Specification: ISO 4925 Class 4
Specification: SAE J 1703 / J 1704
Dry Boiling Point [°C]: 260 °C
Recommended replace interval [km]: 40000 km
Recommended replace interval [years]: 2 Years
Specification: FMVSS 116 DOT 3
Wet Boiling Point [°C]: 180 °C
Weight [kg]: 1,4 kg
Content [litre]: 1 l
Additional Info: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events. Products supplied by us are without exception intended for the designated use. Please note that our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist personnel. There is no guarantee for inappropriate, improper or unintended use.
Width [mm]: 115,0 mm
DOT specification: DOT 4
$13.92
no VAT req.
Available: 10+
Ready to Ship
Handling time: About 1 business day(s)
Handling Time: About 1 business day(s)
?
The item should be shipped within 1 business day(s) of receiving cleared payment.
Add to wishlist
Brake Fluid
Art-Nr: 000406
Packing Type: Bottle
Dry Boiling Point [°C]: 245 °C
Content [litre]: 1 l
Chemical Properties: Synthetic
DOT specification: DOT 4
$5.40
no VAT req.
Available: 10+
Available: 10+
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
Handling time: About 3 business day(s)
Handling Time: About 3 business day(s)
The item should be shipped within 2 business day(s) of receiving cleared payment.
?
The item should be shipped within 3 business day(s) of receiving cleared payment.
Add to wishlist
Brake Fluid
Art-Nr: 000407
Packing Type: Canister
Dry Boiling Point [°C]: 245 °C
Content [litre]: 3 l
Chemical Properties: Synthetic
DOT specification: DOT 4
$14.96
no VAT req.
Available: 10+
Available: 10+
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
Handling time: About 3 business day(s)
Handling Time: About 3 business day(s)
The item should be shipped within 2 business day(s) of receiving cleared payment.
?
The item should be shipped within 3 business day(s) of receiving cleared payment.
Add to wishlist
Brake Fluid
Art-Nr: 360047
Packing Type: Bottle
Dry Boiling Point [°C]: 245 °C
Content [litre]: 0,5 l
Chemical Properties: Synthetic
DOT specification: DOT 4
$2.96
no VAT req.
Available: 10+
Available: 10+
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
Handling time: About 3 business day(s)
Handling Time: About 3 business day(s)
The item should be shipped within 2 business day(s) of receiving cleared payment.
?
The item should be shipped within 3 business day(s) of receiving cleared payment.
Add to wishlist
Brake Fluid
Art-Nr: PFB401
Quality: DOT 4
Content [litre]: 1 l
$5.85
no VAT req.
Available: 10+
Handling time: About 2 business day(s)
Handling Time: About 2 business day(s)
?
The item should be shipped within 2 business day(s) of receiving cleared payment.
Add to wishlist
Showing 1-15 of 112 Products
